Wraps by car

Nissan BE-1 wrap

The Nissan BE-1 wrap page covers the first generation, produced from 1987 to 1988, in its coupe body style. A full vinyl wrap of this mini car takes about 39 ft (12 m) of 60-inch (1.52 m) cast film. Chrome or patterned film increases the total to about 49 ft (15 m). The small footprint keeps material needs lower than on larger cars.

1generations12 mof film for a full wrap

Nissan BE-1, first generation, factory photo
Nissan BE-1, first generation. Factory color shown.

Nissan BE-1 wrap colors and ideas

  • Nissan BE-1 black wrap
  • Nissan BE-1 white wrap
  • Nissan BE-1 gray wrap
  • Nissan BE-1 silver wrap
  • Nissan BE-1 red wrap
  • Nissan BE-1 blue wrap
  • Nissan BE-1 green wrap
  • Nissan BE-1 yellow wrap
  • Nissan BE-1 orange wrap
  • Nissan BE-1 purple wrap
  • Nissan BE-1 pink wrap
  • Nissan BE-1 teal wrap
  • Nissan BE-1 brown wrap
  • Nissan BE-1 gold wrap
  • Nissan BE-1 chrome wrap
  • Nissan BE-1 color shift wrap
  • Nissan BE-1 carbon fiber wrap
  • Nissan BE-1 camo and patterned wrap

How much vinyl to wrap a Nissan BE-1

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1987–1988coupe (2 doors)143.1 in (3,635 mm)about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m)

Nissan BE-1 wrap cost factors

Nissan BE-1 wrap cost depends on the film type and the condition of the panels. The car measures 143.1 in (3,635 mm), and the simple coupe shape reduces labor time. A color change wrap needs about 39 ft (12 m) of film, while chrome or patterned film needs about 49 ft (15 m). Paint correction or repair before wrapping adds to the total work.

  • Film for a full wrap: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Nissan BE-1 wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan BE-1, first generation, factory photo
Factory color shown

1987–1988 Nissan BE-1 coupe (first generation)

1987–1988coupe (2 doors)143.1 in (3,635 mm)

The first generation Nissan BE-1 was built in 1987 and 1988, and many examples now have old or repainted panels. A test spot comes before a full wrap to check how the film adheres to the original paint. Panels that are original or repainted may hold film differently. A professional installer checks this before starting.

Two long side doors: each door is one large piece of film.

Film: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).

Roof, hood, chrome delete and PPF on a Nissan BE-1

Smaller jobs on a Nissan BE-1 include a partial wrap of the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) can be applied as a clear film on the front end. These options suit owners who want a change without wrapping the whole car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Nissan BE-1: body, cut-outs and film

A Nissan BE-1 vinyl wrap is straightforward because the car only came as a two-door coupe. The body is 143.1 in (3,635 mm) long, which puts it in the mini class. Its compact panels mean fewer large surfaces to cover compared with a sedan. The single body style also makes film templates more consistent.

Nissan BE-1 wrap ideas start with the two long side doors, each of which is one large piece of film. The doors are the largest panels and need careful squeegeeing to avoid lift at the edges. Other parts, like the mirrors and badges, come off for a cleaner finish. The wrap installer also cuts out window trim and lights.

How much vinyl to wrap a Nissan BE-1 does not change between generations because the catalog lists one generation only. The 1987–1988 coupe is the sole body, so film estimates stay the same for every car. Counting film is easier when a model has a single body style and no length differences. A wrapped BK10 always uses the same amount of cast film.

Questions about wrapping a Nissan BE-1

How much vinyl does it take to wrap a Nissan BE-1?

It takes about 39 ft (12 m) of 60-inch (1.52 m) cast film to wrap a Nissan BE-1. Chrome or patterned film increases the estimate to about 49 ft (15 m). The first generation coupe is the only body, so the figure does not change.

Can I wrap only the hood or the roof of a Nissan BE-1?

Yes, you can wrap only the hood or the roof of a Nissan BE-1. Partial wraps cover the roof, hood, or mirror caps. A professional can also do a chrome delete on the window trim and badges.

Is a Nissan BE-1 hard to wrap?

The Nissan BE-1 is not hard to wrap, but the two long side doors add work. Each door is one large piece of film, which requires careful handling. The car is a mini at 143.1 in (3,635 mm), so there is less surface area than on a larger vehicle.

How many generations of the Nissan BE-1 does this page cover?

This page covers one generation of the Nissan BE-1. The model was produced from 1987 to 1988 as a two-door coupe.