Wraps by car

Nissan Clipper Rio wrap

This page covers the Nissan Clipper Rio wrap, the van produced from 2003 to 2012 in one generation. A full vinyl wrap of the newest body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 57 ft (17.5 m).

1generations15.5 mof film for a full wrap

Nissan Clipper Rio, first generation, factory photo
Nissan Clipper Rio, first generation. Factory color shown.

Nissan Clipper Rio wrap colors and ideas

  • Clipper Rio black wrap
  • Clipper Rio white wrap
  • Clipper Rio gray wrap
  • Clipper Rio silver wrap
  • Clipper Rio red wrap
  • Clipper Rio blue wrap
  • Clipper Rio green wrap
  • Clipper Rio yellow wrap
  • Clipper Rio orange wrap
  • Clipper Rio purple wrap
  • Clipper Rio pink wrap
  • Clipper Rio teal wrap
  • Clipper Rio brown wrap
  • Clipper Rio gold wrap
  • Clipper Rio chrome wrap
  • Clipper Rio color shift wrap
  • Clipper Rio carbon fiber wrap
  • Clipper Rio camo and patterned wrap

How much vinyl to wrap a Nissan Clipper Rio

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2003–2012van (5 doors)133.7 in (3,395 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Clipper Rio wrap cost factors

Clipper Rio wrap cost depends on the area to be covered, the film type, and the labor to handle the tall body and the sliding door tracks. A full wrap of this 133.7 in (3,395 mm) long van uses about 51 ft (15.5 m) of cast film, while chrome or patterned film raises the amount to about 57 ft (17.5 m). The roof work from a platform and the special cuts along the door tracks add labor time.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (74.4 in (1,890 mm)): the roof is wrapped from a platform.
  • Restyled in 2007: bumpers and lights differ between the versions, and so do the film cuts.

Clipper Rio wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan Clipper Rio, first generation, factory photo
Factory color shown

2003–2012 Clipper Rio van (first generation)

2003–2012van (5 doors)133.7 in (3,395 mm)

The first generation Nissan Clipper Rio is the only body offered for this model, and its sliding side doors set the layout of any wrap. The film is cut along the door tracks, which remain bare, and that line is the same for every year from 2003 to 2012. The tracks also act as a visual break, so a two-tone design can follow them neatly.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (74.4 in (1,890 mm)): the roof is wrapped from a platform.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Clipper Rio

A partial wrap on the Clipper Rio can cover the roof, hood, or mirror caps, and these are straightforward jobs that still require the tall body to be reached safely. A chrome delete (bright trim covered with black film) suits the window trim and badges of the first generation. Paint protection film (PPF) can be applied to the front end as clear film.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Nissan Clipper Rio: body, cut-outs and film

The Nissan Clipper Rio vinyl wrap follows a tall, short minivan body: 133.7 in (3,395 mm) long and 74.4 in (1,890 mm) high. The five-door layout includes sliding side doors, whose tracks stay bare and guide the film cuts. A wrap on this shape is a careful fit, not a race: the roof must be worked from a platform.

Clipper Rio wrap ideas start with the sliding side doors, where the film is cut along the door tracks and the tracks themselves remain unwrapped. The tall body means the roof is best handled from a platform, and the door handles and badges need cut-outs or removal. The mirrors and the rear light clusters also come off for a clean edge.

To know how much vinyl to wrap a Clipper Rio, count one generation, produced from 2003 to 2012, with a restyling in 2007. The body length stays the same for all years, so the main film estimate holds across the catalog. A restyled 2007 or later model may have slightly different bumpers, which changes the cutting template but not the total amount.

Questions about wrapping a Nissan Clipper Rio

How much vinyl does it take to wrap a Nissan Clipper Rio?

A full vinyl wrap of a Nissan Clipper Rio takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 57 ft (17.5 m).

Are the sliding doors of a Clipper Rio wrapped?

The sliding doors of a Clipper Rio are wrapped, but the door tracks are left bare. The film is cut along the tracks, so the doors themselves are covered and the tracks remain visible.

Which years of the Clipper Rio take the same film cuts?

All years of the Clipper Rio, from 2003 to 2012, take the same film cuts for the main body. The restyling in 2007 may affect only the bumpers, so the sliding door and roof cuts are unchanged.

Can I wrap only the hood or the roof of a Clipper Rio?

Yes, you can wrap only the hood or the roof of a Clipper Rio, as a partial wrap. The roof is tall at 74.4 in (1,890 mm), so a platform is used to reach it safely.