Wraps by car

Nissan Cube wrap

The Nissan Cube wrap page covers all three generations of this boxy minivan, from the first Z10 to the Z12. A full vinyl wrap of the newest body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. Chrome or patterned film uses about 69 ft (21 m) on the same body.

3generations18 mof film for a full wrap

Nissan Cube, third generation, factory photo
Nissan Cube, third generation. Factory color shown.

Nissan Cube wrap colors and ideas

  • Cube black wrap
  • Cube white wrap
  • Cube gray wrap
  • Cube silver wrap
  • Cube red wrap
  • Cube blue wrap
  • Cube green wrap
  • Cube yellow wrap
  • Cube orange wrap
  • Cube purple wrap
  • Cube pink wrap
  • Cube teal wrap
  • Cube brown wrap
  • Cube gold wrap
  • Cube chrome wrap
  • Cube color shift wrap
  • Cube carbon fiber wrap
  • Cube camo and patterned wrap

How much vinyl to wrap a Nissan Cube

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2008–2019van (5 doors)156.7 in (3,980 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)
2002–2008van (5 doors)146.5 in (3,720 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)
1998–2002van (5 doors)147.6 in (3,750 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Cube wrap cost factors

Cube wrap cost depends on the film type and the condition of the paint, not on a fixed price. A color change wrap on the newest body uses about 59 ft (18 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds about 10 ft (3 m) more, and any paint repair work adds to the total.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Cube wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan Cube, third generation, factory photo
Factory color shown

2008–2019 Cube van (third generation)

2008–2019van (5 doors)156.7 in (3,980 mm)

The third generation Nissan Cube has sliding side doors that leave the door tracks bare, so the film is cut along them. The Z12 body from 2008–2019 is the longest Cube at 156.7 in (3,980 mm), and its five-door van shape needs about 59 ft (18 m) of 60-inch (1.52 m) cast film for a full wrap. The door tracks stay visible after the wrap, which gives a clean line between the film and the metal.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Nissan Cube, second generation, factory photo
Factory color shown

2002–2008 Cube van (second generation)

2002–2008van (5 doors)146.5 in (3,720 mm)

The second generation Nissan Cube from 2002–2008 has paint that may be original or repainted, so a test spot comes before a full wrap. The Z11 is 146.5 in (3,720 mm) long and takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. Because this Cube is often older, the installer checks the paint condition before the film is applied.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Nissan Cube, first generation, factory photo
Factory color shown

1998–2002 Cube van (first generation)

1998–2002van (5 doors)147.6 in (3,750 mm)

The first generation Nissan Cube was restyled in 2000, so bumpers and lights changed and film cut for one version does not fit the other. The Z10 from 1998–2002 is 147.6 in (3,750 mm) long and takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. The restyling means the wrap kit must match the exact year of the car.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Cube

A Cube chrome delete covers the window trim and badges with black film, and a partial wrap can include the roof, hood, or mirror caps. Paint protection film (PPF) is a clear film applied to the front end of the Cube. These smaller jobs use less film than a full wrap and can be done on any generation.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Nissan Cube: body, cut-outs and film

A Nissan Cube vinyl wrap follows the van's tall, flat sides and short overall length. The third generation measures 156.7 in (3,980 mm) long, while the second is 146.5 in (3,720 mm) and the first is 147.6 in (3,750 mm). All models have five doors and a tall roof that adds film area without being hard to reach.

Cube wrap ideas start with the sliding side doors, where the film is cut along the door tracks and the tracks stay bare. The door handles, mirror caps, and badges are removed or cut around for a clean finish. The rear hatch and the front bumper are wrapped as separate pieces so the film can follow their curves.

How much vinyl to wrap a Cube depends on the generation you own. The newest Z12 body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film, while the Z11 and Z10 each take about 54 ft (16.5 m). The extra length of the Z12 means more film is needed for the roof and the side panels.

Questions about wrapping a Nissan Cube

How much vinyl does it take to wrap a Nissan Cube?

About 59 ft (18 m) of 60-inch (1.52 m) cast film is needed to wrap the newest Nissan Cube. This figure is for the third generation Z12 body with a full color change wrap. Chrome or patterned film requires about 69 ft (21 m).

Are the sliding doors of a Cube wrapped?

Yes, the sliding doors of a Cube are wrapped, but the door tracks stay bare and the film is cut along them. This keeps the tracks working and gives a clean edge to the vinyl wrap.

Can I wrap only the hood or the roof of a Cube?

Yes, you can wrap only the hood or the roof of a Cube as a partial wrap. Other partial jobs include the mirror caps, a chrome delete on the window trim and badges, or paint protection film on the front end.

Is a Cube hard to wrap?

A Cube is not hard to wrap, but the sliding side doors add work because the film is cut along the door tracks. The tall, flat panels are easy to cover, but the short length means the film must be carefully positioned around the five doors.