Wraps by car

Nissan Dayz wrap

The Nissan Dayz wrap page covers the first-generation hatchback produced from 2013 to 2019. A full vinyl wrap of the newest body uses about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film takes about 52 ft (16 m).

1generations13.5 mof film for a full wrap

Nissan Dayz, first generation, factory photo
Nissan Dayz, first generation. Factory color shown.

Nissan Dayz wrap colors and ideas

  • Dayz black wrap
  • Dayz white wrap
  • Dayz gray wrap
  • Dayz silver wrap
  • Dayz red wrap
  • Dayz blue wrap
  • Dayz green wrap
  • Dayz yellow wrap
  • Dayz orange wrap
  • Dayz purple wrap
  • Dayz pink wrap
  • Dayz teal wrap
  • Dayz brown wrap
  • Dayz gold wrap
  • Dayz chrome wrap
  • Dayz color shift wrap
  • Dayz carbon fiber wrap
  • Dayz camo and patterned wrap

How much vinyl to wrap a Nissan Dayz

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2013–2019hatchback (5 doors)133.7 in (3,395 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)

Dayz wrap cost factors

Dayz wrap cost depends on the film type, the wrap coverage, and the preparation the body needs. A full wrap of this 133.7 in (3,395 mm) hatchback uses about 44 ft (13.5 m) of cast film, while chrome or patterned film uses about 52 ft (16 m). The restyling in 2015 means bumper and light cut files differ between early and late versions, which can affect labor. Removing door handles, badges, and mirror caps adds time, as does working around the tailgate glass.

  • Film for a full wrap: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 2015: bumpers and lights differ between the versions, and so do the film cuts.

Dayz wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan Dayz, first generation, factory photo
Factory color shown

2013–2019 Dayz hatchback (first generation)

2013–2019hatchback (5 doors)133.7 in (3,395 mm)

The first-generation Nissan Dayz, produced from 2013 to 2019, received a restyling in 2015 that changed the bumpers and lights. Film patterns cut for the 2013–2015 front or rear bumper do not fit the 2015–2019 versions. The tailgate with its large glass panel and the five-door hatchback body stayed the same through the run. When ordering a partial or full wrap kit, confirm whether the template matches the pre- or post-restyling bumpers.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Roof, hood, chrome delete and PPF on a Dayz

A partial wrap on a Nissan Dayz covers the roof, hood, and mirror caps as separate sections without wrapping the whole car. A Dayz chrome delete turns the window trim and badges black or body-colored, and it uses small amounts of film. Paint protection film (PPF) on a Dayz is a clear film applied to the front end: hood, fenders, mirror caps, and sometimes the bumper. The tailgate glass edge and the short hood make these smaller jobs quicker than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Nissan Dayz: body, cut-outs and film

A Nissan Dayz vinyl wrap starts with a compact hatchback measuring 133.7 in (3,395 mm) long with five doors. The small body and short panels keep material needs modest for a full color change. The tall roofline and window area leave less painted surface than on a longer car. Installers still plan for the door handles, mirrors, and bumper curves.

Dayz wrap ideas often focus on the tailgate, because the rear glass is set into the tailgate and the film ends at the edge of the glass. The tailgate handle and badges are removed or cut around for a clean edge. The mirror caps, door handles, and roof rails on some trims are wrapped separately. The front bumper and grille need relief cuts for the many openings and fog light surrounds.

How much vinyl to wrap a Dayz depends on the body version, since only the first generation exists in this catalog with a restyling in 2015. The 2015 update changed the bumpers and lights, so film cut for one version does not fit the other. For a full wrap of a 2013–2019 Dayz, the estimate is about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the figure to about 52 ft (16 m) because of pattern matching and extra waste.

Questions about wrapping a Nissan Dayz

How much vinyl does it take to wrap a Nissan Dayz?

A full wrap of a Nissan Dayz uses about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. If the wrap uses chrome or patterned film, plan for about 52 ft (16 m).

Which years of the Dayz take the same film cuts?

The first-generation Nissan Dayz produced from 2013 to 2019 takes the same main body film cuts for the doors, roof, and rear quarter panels. The 2015 restyling changed the bumpers and lights, so those parts have different cuts for 2013–2015 and 2015–2019 versions.

Can I wrap only the hood or the roof of a Dayz?

Yes, you can wrap only the hood or the roof of a Nissan Dayz. A partial wrap on this car commonly covers the roof, hood, and mirror caps, and a chrome delete covers the window trim and badges. Paint protection film (PPF) is another partial option that applies clear film to the front end.

Is a Dayz hard to wrap?

A Nissan Dayz is not especially hard to wrap, but its small size and tailgate design add a few steps. The tailgate has rear glass set into it, so the film ends at the edge of the glass and needs a precise cut. The short 133.7 in (3,395 mm) body leaves little room for stretching errors, and the bumpers have several openings and recesses that need relief cuts.