Wraps by car

Nissan Figaro wrap

The Nissan Figaro wrap guide covers the single generation produced in 1991–1992, the FK10 coupe, and the film needed for a full color change wrap. A complete vinyl wrap of this mini-class two-door takes about 36 ft (11 m) of 60-inch (1.52 m) cast film. If the wrap uses chrome or patterned film, plan for about 46 ft (14 m). This page walks through the body, the tricky areas, and the jobs smaller than a full wrap.

1generations11 mof film for a full wrap

Nissan Figaro, first generation, factory photo
Nissan Figaro, first generation. Factory color shown.

Nissan Figaro wrap colors and ideas

  • Figaro black wrap
  • Figaro white wrap
  • Figaro gray wrap
  • Figaro silver wrap
  • Figaro red wrap
  • Figaro blue wrap
  • Figaro green wrap
  • Figaro yellow wrap
  • Figaro orange wrap
  • Figaro purple wrap
  • Figaro pink wrap
  • Figaro teal wrap
  • Figaro brown wrap
  • Figaro gold wrap
  • Figaro chrome wrap
  • Figaro color shift wrap
  • Figaro carbon fiber wrap
  • Figaro camo and patterned wrap

How much vinyl to wrap a Nissan Figaro

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1991–1992coupe (2 doors)147.2 in (3,740 mm)about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m)

Figaro wrap cost factors

Figaro wrap cost depends on the film type, the condition of the paint, and the work on the small trim parts. The base cast wrap film estimate is about 36 ft (11 m), while chrome or patterned film raises the amount to about 46 ft (14 m). Paint age on a 1991–1992 car can add surface prep, because panels may be original or repainted. The number of cut-outs and removals for the badges and bright trim also influences the labor.

  • Film for a full wrap: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Figaro wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan Figaro, first generation, factory photo
Factory color shown

1991–1992 Figaro coupe (first generation)

1991–1992coupe (2 doors)147.2 in (3,740 mm)

For the first-generation Figaro, the paint age plays a big role in a wrap. The car is from 1991–1992, so panels may still wear the original paint or a past respray. A test spot on the paint before the full wrap shows whether the vinyl can bond well. Any peeling or weak clear coat must be addressed so the film does not lift later.

Two long side doors: each door is one large piece of film.

Film: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m).

Roof, hood, chrome delete and PPF on a Figaro

On the Nissan Figaro, smaller jobs make sense without a full wrap. A partial wrap can cover the roof, the hood, or the mirror caps. A chrome delete turns the window trim and badges black, and paint protection film (PPF) puts a clear layer on the front end. These options use far less film than the full 36 ft (11 m) estimate.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Nissan Figaro: body, cut-outs and film

The Nissan Figaro vinyl wrap works with a compact, two-door coupe body measuring 147.2 in (3,740 mm). The short length and simple shape keep the amount of film down compared with a sedan or SUV. The two long side doors each need one large piece of film, so wide vinyl helps the installer avoid a seam. With only one body style as a coupe, the wrap estimate stays the same for every year.

The side doors are the main large panels on the FK10 coupe and each one takes a single broad piece of film. Any Figaro wrap ideas should allow for the bumpers, the mirror caps, and the bright trim around the windows and grille. The badges and the door handles need cut-outs or a temporary removal. These small parts add time to the install but do not change the total film estimate much.

How much vinyl to wrap a Figaro does not change between generations because the catalog lists only one generation, 1991–1992. The FK10 coupe was built for a short run, and the body dimensions stayed the same across those years. An installer planning film for any Figaro can use the same estimate of about 36 ft (11 m). Chrome or patterned film still needs the higher figure of about 46 ft (14 m).

Questions about wrapping a Nissan Figaro

How much vinyl does it take to wrap a Nissan Figaro?

About 36 ft (11 m) of 60-inch (1.52 m) cast film is the estimate for a full vinyl wrap of a Nissan Figaro. If the film is chrome or patterned, the figure rises to about 46 ft (14 m). The car's compact coupe body and the short production run make the estimate steady for every FK10.

Can I wrap only the hood or the roof of a Figaro?

Yes, you can wrap only the hood or the roof of a Figaro. A partial wrap can cover the roof, the hood, or the mirror caps, and a chrome delete handles the window trim and badges. Paint protection film (PPF) on the front end is another focused option that uses clear film.

Is a Figaro hard to wrap?

A Figaro has a small, simple shape, but the two long side doors add work because each door is one large piece of film. The 1991–1992 paint may need extra prep before the vinyl goes on. The bright trim around the windows and grille calls for careful cutting or removal.

How many generations of the Figaro does this page cover?

This page covers one generation of the Figaro, the first generation sold from 1991 to 1992. The FK10 coupe is the only body style in the catalog. All the wrap estimates on the page apply to that generation.