Wraps by car

Nissan Hypermini wrap

The Nissan Hypermini wrap page covers this small electric hatchback from 1999 to 2001. This catalog lists one generation of the Hypermini. A full vinyl wrap of the newest body takes about 36 ft (11 m) of 60-inch (1.52 m) cast film.

1generations11 mof film for a full wrap

Nissan Hypermini, first generation, factory photo
Nissan Hypermini, first generation. Factory color shown.

Nissan Hypermini wrap colors and ideas

  • Hypermini black wrap
  • Hypermini white wrap
  • Hypermini gray wrap
  • Hypermini silver wrap
  • Hypermini red wrap
  • Hypermini blue wrap
  • Hypermini green wrap
  • Hypermini yellow wrap
  • Hypermini orange wrap
  • Hypermini purple wrap
  • Hypermini pink wrap
  • Hypermini teal wrap
  • Hypermini brown wrap
  • Hypermini gold wrap
  • Hypermini chrome wrap
  • Hypermini color shift wrap
  • Hypermini carbon fiber wrap
  • Hypermini camo and patterned wrap

How much vinyl to wrap a Nissan Hypermini

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1999–2001hatchback (3 doors)104.9 in (2,665 mm)about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 43 ft (13 m)

Hypermini wrap cost factors

The Hypermini wrap cost depends on several factors of this car. Material use is about 36 ft (11 m) for standard film or 43 ft (13 m) for chrome or patterned film. Labor varies with the tailgate glass, long doors, and charge port door. Paint condition on a car from 1999–2001 may require extra preparation.

  • Film for a full wrap: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 43 ft (13 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Hypermini wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan Hypermini, first generation, factory photo
Factory color shown

1999–2001 Hypermini hatchback (first generation)

1999–2001hatchback (3 doors)104.9 in (2,665 mm)

The first generation Nissan Hypermini was produced from 1999 to 2001 as a hatchback with 3 doors. On a car of these years panels may be original or repainted. A test spot on the paint comes before a full wrap to check adhesion. This single generation is the basis for all film estimates on this page.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 43 ft (13 m).

Roof, hood, chrome delete and PPF on a Hypermini

Partial wrap options for the Hypermini include the roof, hood, and mirror caps. Chrome delete covers window trim and badges with black film. Paint protection film (PPF) can be applied as clear film on the front end. These jobs are smaller than a full wrap and use less material.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Nissan Hypermini: body, cut-outs and film

A Nissan Hypermini vinyl wrap suits its single hatchback body style with 3 doors. The car is 104.9 in (2,665 mm) long, so it needs less film than larger vehicles. Its compact size keeps the wrap job straightforward. The three-door layout means fewer door handles to work around.

For Hypermini wrap ideas, the tailgate includes the rear glass, so the film ends at the edge of the glass. Two long side doors each take one large piece of film. The electric car's charge port door is wrapped as its own small piece. These parts need careful cutting and fitting.

How much vinyl to wrap a Hypermini depends on the film type and finish. A plain color wrap uses about 36 ft (11 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 43 ft (13 m). Only one generation exists, so material amounts stay the same.

Questions about wrapping a Nissan Hypermini

How much vinyl does it take to wrap a Nissan Hypermini?

About 36 ft (11 m) of 60-inch (1.52 m) cast film is needed to wrap a Nissan Hypermini. This figure applies to the newest body in the catalog. Chrome or patterned film increases the amount to about 43 ft (13 m). The estimate covers a full color change wrap.

Can I wrap only the hood or the roof of a Hypermini?

Yes, you can wrap only the hood or the roof of a Hypermini. The catalog lists partial wrap jobs including the roof, hood, and mirror caps. These smaller jobs use less vinyl than a full wrap. They are a way to change the look without covering the whole car.

Is a Hypermini hard to wrap?

Yes, a Hypermini is somewhat hard to wrap because of its tailgate with integrated rear glass. The film must be cut precisely at the edge of the glass. Two long side doors each require one large piece of film. The charge port door adds another small piece to wrap separately.

How many generations of the Hypermini does this page cover?

This page covers one generation of the Nissan Hypermini. The generation was produced from 1999 to 2001 as a hatchback with 3 doors. All film estimates on this page refer to that generation. No other generations exist in the catalog.