Wraps by car

Nissan Juke Nismo wrap

The Nissan Juke Nismo wrap covers the first-generation Juke Nismo, a five-door SUV built from 2013 to 2019. A full vinyl wrap of the newest body takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the estimate to about 64 ft (19.5 m). This page covers the film, the cut-outs, and the partial jobs on this car.

1generations16.5 mof film for a full wrap

Nissan Juke Nismo, first generation, factory photo
Nissan Juke Nismo, first generation. Factory color shown.

Nissan Juke Nismo wrap colors and ideas

  • Juke Nismo black wrap
  • Juke Nismo white wrap
  • Juke Nismo gray wrap
  • Juke Nismo silver wrap
  • Juke Nismo red wrap
  • Juke Nismo blue wrap
  • Juke Nismo green wrap
  • Juke Nismo yellow wrap
  • Juke Nismo orange wrap
  • Juke Nismo purple wrap
  • Juke Nismo pink wrap
  • Juke Nismo teal wrap
  • Juke Nismo brown wrap
  • Juke Nismo gold wrap
  • Juke Nismo chrome wrap
  • Juke Nismo color shift wrap
  • Juke Nismo carbon fiber wrap
  • Juke Nismo camo and patterned wrap

How much vinyl to wrap a Nissan Juke Nismo

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2013–2019SUV (5 doors)164.0 in (4,165 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Juke Nismo wrap cost factors

Juke Nismo wrap cost depends on the film, the body version, and the wrap job. The standard estimate is about 54 ft (16.5 m) of cast film, while chrome or patterned film needs about 64 ft (19.5 m). Cut-outs for the cameras and fog lamps add labor on every trim. A partial job uses less film but keeps the same cut-outs on the wrapped panels.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2014: bumpers and lights differ between the versions, and so do the film cuts.

Juke Nismo wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan Juke Nismo, first generation, factory photo
Factory color shown

2013–2019 Juke Nismo SUV (first generation)

2013–2019SUV (5 doors)164.0 in (4,165 mm)

The first-generation Juke Nismo was restyled in 2014, changing the bumpers and lights. Film cut for a 2013 car does not fit a 2015 car at the front or rear. The body shell and the tailgate stay the same, so the roof and doors use the same templates. A full wrap of this generation takes about 54 ft (16.5 m) of film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Juke Nismo

A partial wrap on the Juke Nismo covers the roof, hood, and mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) puts clear film on the front end. All three jobs use less film than a full wrap but still need the camera and fog lamp cut-outs on the wrapped panels.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Nissan Juke Nismo: body, cut-outs and film

The Nissan Juke Nismo vinyl wrap uses one roll width for its 164.0 in (4,165 mm) long SUV body with five doors. The tailgate carries the rear glass, so the film ends at the edge of the glass. The body has no long roof rails or separate trunk to break the film. A wrap of this size fits a standard 60-inch (1.52 m) roll without splicing.

Juke Nismo wrap ideas begin with the cut-outs every film needs. Every trim has cameras in the body, and the film is cut around each lens. Every trim also has fog lamps in the front bumper, so the bumper film gets cut-outs there. The tailgate film ends at the edge of the rear glass, not under it.

How much vinyl to wrap a Juke Nismo depends on whether the car is before or after the 2014 restyling. Bumpers and lights changed in 2014, so film cut for one version does not fit the other. The body length stays 164.0 in (4,165 mm) through all years. A 2013 car and a 2019 car need different templates for the front and rear ends.

Questions about wrapping a Nissan Juke Nismo

How much vinyl does it take to wrap a Nissan Juke Nismo?

A Nissan Juke Nismo takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film for a full wrap. Chrome or patterned film raises the estimate to about 64 ft (19.5 m). The tailgate film ends at the edge of the rear glass. Cut-outs for the cameras and fog lamps are included in that estimate.

Which years of the Juke Nismo take the same film cuts?

2013 and 2014 cars up to the restyling take one set of film cuts, and 2015 to 2019 cars take another. The bumpers and lights changed in 2014, so film cut for one version does not fit the other. The roof, doors, and tailgate keep the same templates. Check the build date if the car is from 2014.

Can I wrap only the hood or the roof of a Juke Nismo?

Yes, you can wrap only the hood or the roof of a Juke Nismo. A partial wrap covers the roof, hood, and mirror caps. The hood wrap needs no cut-outs, but the roof wrap ends at the edge of the rear glass. A chrome delete covers the window trim and badges with black film.

Is a Juke Nismo hard to wrap?

A Juke Nismo adds work from its cameras, fog lamps, and tailgate glass. Every trim has cameras in the body, and the film is cut around each lens. Every trim has fog lamps in the front bumper, so the bumper film gets cut-outs there. The tailgate film ends at the edge of the rear glass, which needs a clean cut line.