Wraps by car

Nissan Langley wrap

The Nissan Langley wrap page covers all three generations of this compact hatchback and sedan, from 1978 to 1990. A full wrap of the newest body takes about 46 ft (14 m) of 60-inch (1.52 m) cast film for the hatchback, or 48 ft (14.5 m) for the sedan. The Langley keeps its wrap simple: every generation has a tailgate with the rear glass in it, so the film ends at the edge of the glass.

3generations14.5 mof film for a full wrap

Nissan Langley, third generation, factory photo
Nissan Langley, third generation. Factory color shown.

Nissan Langley wrap colors and ideas

  • Langley black wrap
  • Langley white wrap
  • Langley gray wrap
  • Langley silver wrap
  • Langley red wrap
  • Langley blue wrap
  • Langley green wrap
  • Langley yellow wrap
  • Langley orange wrap
  • Langley purple wrap
  • Langley pink wrap
  • Langley teal wrap
  • Langley brown wrap
  • Langley gold wrap
  • Langley chrome wrap
  • Langley color shift wrap
  • Langley carbon fiber wrap
  • Langley camo and patterned wrap

How much vinyl to wrap a Nissan Langley

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1986–1990hatchback, sedan (3 or 4 doors)158.9 in (4,035 mm) to 167.5 in (4,255 mm)about 46 ft (14 m) for the hatchback to 48 ft (14.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m)
1982–1986hatchback (3 or 5 doors)156.5 in (3,975 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)
1978–1982hatchback (3 doors)153.1 in (3,890 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Langley wrap cost factors

The Langley wrap cost depends on the generation, the body style, and the film you choose. A first generation hatchback needs about 44 ft (13.5 m) of 60-inch (1.52 m) cast film, while a third generation sedan needs 48 ft (14.5 m). Chrome or patterned film adds up to about 59 ft (18 m) for the newest sedan and 56 ft (17 m) for the first generation. The installer's labor also changes with the number of panels and the condition of the paint on a car from 1978 to 1990.

  • Film for a full wrap: about 46 ft (14 m) for the hatchback to 48 ft (14.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m).
  • Body: hatchback, sedan (3 or 4 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Langley wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan Langley, third generation, factory photo
Factory color shown

1986–1990 Langley hatchback, sedan (third generation)

1986–1990hatchback, sedan (3 or 4 doors)158.9 in (4,035 mm) to 167.5 in (4,255 mm)

The third generation Nissan Langley, from 1986 to 1990, comes as a hatchback or a sedan with three or four doors. The body style decides the panel plan and the film amount: the hatchback takes about 46 ft (14 m) of 60-inch (1.52 m) cast film, and the sedan takes 48 ft (14.5 m). The sedan is longer at up to 167.5 in (4,255 mm), and the extra length is mostly in the rear quarter panels and trunk. Both bodies share the same tailgate design where the film ends at the edge of the rear glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 46 ft (14 m) for the hatchback to 48 ft (14.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m).

Nissan Langley, second generation, factory photo
Factory color shown

1982–1986 Langley hatchback (second generation)

1982–1986hatchback (3 or 5 doors)156.5 in (3,975 mm)

The second generation Nissan Langley, from 1982 to 1986, is a three- or five-door hatchback. On a car of these years, panels may be original or repainted, and a test spot comes before a full wrap to check paint adhesion. The body is 156.5 in (3,975 mm) long and needs about 46 ft (14 m) of 60-inch (1.52 m) cast film. The tailgate has the rear glass in it, so the film ends at the edge of the glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Nissan Langley, first generation, factory photo
Factory color shown

1978–1982 Langley hatchback (first generation)

1978–1982hatchback (3 doors)153.1 in (3,890 mm)

The first generation Nissan Langley, from 1978 to 1982, is a three-door hatchback that wraps with two long side doors. Each door is one large piece of film, so the installer handles a bigger panel than on later generations. The car is 153.1 in (3,890 mm) long and needs about 44 ft (13.5 m) of 60-inch (1.52 m) cast film, the smallest amount of any Langley. The tailgate still has the rear glass in it, with the film ending at the edge of the glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Langley

A partial wrap on a Nissan Langley covers the roof, hood, or mirror caps, and a chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end of the Langley to guard against stone chips. These jobs use less film than a full wrap, and the amount depends on the generation and the panels you choose. The first generation has long doors, so a partial wrap on the doors would use larger pieces than on the third generation.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Nissan Langley: body, cut-outs and film

The Nissan Langley vinyl wrap depends on the body style and size, which stay compact across all three generations. The third generation offers hatchback and sedan bodies from 158.9 in (4,035 mm) to 167.5 in (4,255 mm) long, and the hatchback needs about 46 ft (14 m) of film while the sedan needs 48 ft (14.5 m). The first generation is the smallest at 153.1 in (3,890 mm), and its three-door hatchback needs about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. The second generation sits between them with a 156.5 in (3,975 mm) three- or five-door hatchback needing about 46 ft (14 m).

Langley wrap ideas start with the tailgate on every generation, where the film ends at the edge of the rear glass. The third generation sedan has four doors and a trunk lid, so each panel is wrapped separately with no glass in the way. The first generation has two long side doors, and each door is one large piece of film that needs careful handling. No generation has a roof antenna or other parts that must be removed for a standard color change wrap.

How much vinyl to wrap a Langley changes with the generation, but the numbers stay close. The first generation needs about 44 ft (13.5 m) of 60-inch (1.52 m) cast film, while the second and third generation hatchbacks need about 46 ft (14 m). The third generation sedan is the largest body and needs about 48 ft (14.5 m). If you choose chrome or patterned film, add about 4.5 to 6.5 ft (1.5 to 2 m) to those figures.

Questions about wrapping a Nissan Langley

How much vinyl does it take to wrap a Nissan Langley?

A full wrap of the newest Nissan Langley takes about 46 ft (14 m) of 60-inch (1.52 m) cast film for the hatchback, or 48 ft (14.5 m) for the sedan. The first generation needs about 44 ft (13.5 m), and the second generation needs about 46 ft (14 m). Chrome or patterned film adds up to about 59 ft (18 m) for the newest sedan.

Which Langley body takes more film?

The third generation Nissan Langley sedan takes more film than the hatchback: 48 ft (14.5 m) versus 46 ft (14 m) of 60-inch (1.52 m) cast film. The sedan is longer at up to 167.5 in (4,255 mm), and the extra length adds panels around the trunk. The first generation hatchback takes the least film at 44 ft (13.5 m).

Can I wrap only the hood or the roof of a Langley?

Yes, you can wrap only the hood or the roof of a Nissan Langley as a partial wrap. A partial wrap also covers the mirror caps, and a chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end. The amount of film depends on the generation and the panel you choose.

Is a Langley hard to wrap?

A Nissan Langley is not hard to wrap, but it has a few specific challenges. Every generation has a tailgate with the rear glass in it, so the film ends at the edge of the glass and needs a clean cut. The first generation has two long side doors, and each door is one large piece of film that takes care to apply without wrinkles. The compact size, from 153.1 in (3,890 mm) to 167.5 in (4,255 mm), keeps the panel count low.