Wraps by car

Nissan Largo wrap

This page covers the Nissan Largo wrap across all three generations, from the first van of 1982 to the final 2022 model. The newest body, produced from 1993 to 2022, needs about 57 ft (17.5 m) of 60-inch (1.52 m) cast vinyl wrap for a full color change. Chrome or patterned film on the same van takes about 72 ft (22 m).

3generations17.5 mof film for a full wrap

Nissan Largo, third generation, factory photo
Nissan Largo, third generation. Factory color shown.

Nissan Largo wrap colors and ideas

  • Largo black wrap
  • Largo white wrap
  • Largo gray wrap
  • Largo silver wrap
  • Largo red wrap
  • Largo blue wrap
  • Largo green wrap
  • Largo yellow wrap
  • Largo orange wrap
  • Largo purple wrap
  • Largo pink wrap
  • Largo teal wrap
  • Largo brown wrap
  • Largo gold wrap
  • Largo chrome wrap
  • Largo color shift wrap
  • Largo carbon fiber wrap
  • Largo camo and patterned wrap

How much vinyl to wrap a Nissan Largo

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1993–2022van (5 doors)180.5 in (4,585 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)
1986–1993van (4 doors)171.7 in (4,360 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)
1982–1987van (5 doors)153.5 in (3,900 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Largo wrap cost factors

Largo wrap cost depends on the generation, the film type, and the condition of the paint. A larger second-generation van needs about 66 ft (20 m) of film, while a first or third generation takes about 57 ft (17.5 m), so more film and labor go into the second. The sliding doors add time because each track must be trimmed by hand. On older Largo models, the roof height may require a platform, which also affects the shop time.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Restyled in 1996: bumpers and lights differ between the versions, and so do the film cuts.

Largo wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan Largo, third generation, factory photo
Factory color shown

1993–2022 Largo van (third generation)

1993–2022van (5 doors)180.5 in (4,585 mm)

The third generation Nissan Largo, made from 1993 to 2022, has sliding side doors whose tracks stay bare and decide where the film is cut. The W30 body is a five-door van with a length of 180.5 in (4,585 mm), and a full wrap takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. The restyling in 1996 did not change the door design, so the same cuts apply to all years of this generation. When wrapping, the installer cuts the film along the track edge, leaving the metal track exposed.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Nissan Largo, second generation, factory photo
Factory color shown

1986–1993 Largo van (second generation)

1986–1993van (4 doors)171.7 in (4,360 mm)

The second generation Nissan Largo, built from 1986 to 1993, has a tall body of 75.2 in (1,910 mm), so the roof is wrapped from a platform and takes more time. This GC22 van is a four-door model with a length of 171.7 in (4,360 mm), and a full wrap uses about 66 ft (20 m) of 60-inch (1.52 m) cast film. The sliding side doors also have tracks that stay bare, and the film is cut along them. Because of the height, the installer needs a stable platform to reach the roof panel safely.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (75.2 in (1,910 mm)): the roof is wrapped from a platform.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Nissan Largo, first generation, factory photo
Factory color shown

1982–1987 Largo van (first generation)

1982–1987van (5 doors)153.5 in (3,900 mm)

On the first generation Nissan Largo, made from 1982 to 1987, paint age matters: on a car of these years panels may be original or repainted, and a test spot comes before a full wrap. This five-door van is 153.5 in (3,900 mm) long and takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. The sliding side doors have tracks that stay bare, and the film is cut along them. Before wrapping, the installer checks a small area to ensure the film adheres well to the old paint.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (69.1 in (1,755 mm)): the roof is wrapped from a platform.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Largo

For a Largo, a partial wrap often covers the roof, hood, or mirror caps instead of the whole van. A chrome delete covers the window trim and badges with black film, and it works on any generation because the bright trim is limited. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. On Largo models with sliding doors, partial jobs leave the door tracks untouched, which keeps the work simple.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Nissan Largo: body, cut-outs and film

Every Nissan Largo is a five-door or four-door minivan, and the body length ranges from 153.5 in (3,900 mm) to 180.5 in (4,585 mm) depending on the generation. The newest model at 180.5 in (4,585 mm) uses about 57 ft (17.5 m) of film, while the second generation at 171.7 in (4,360 mm) needs about 66 ft (20 m) because of its taller roofline. A full wrap covers the roof, hood, all side panels, and the rear door, with extra film for the bumpers if they are included. The sliding side doors on every generation mean the film must be cut along the door tracks, which adds a little material for trimming.

Sliding side doors are the main feature that affects Largo wrap ideas, as the door tracks stay bare and the film is cut along them. The second and first generations are tall vans, at 75.2 in (1,910 mm) and 69.1 in (1,755 mm), so the roof is wrapped from a platform. For a chrome delete, the window trim and badges are covered with black film, leaving the door tracks as they are. A partial wrap might cover the roof, hood, or mirror caps without touching the sliding doors.

To know how much vinyl to wrap a Largo, compare the three generations: the first and third use about 57 ft (17.5 m) of cast film, while the second takes 66 ft (20 m). The difference comes from the second generation's taller body and slightly different panel sizes. The first generation (1982–1987) and the pre-restyle third generation (1993–1996) share the same amount of film. If you plan a chrome delete or patterned film, add roughly 15 percent to these figures.

Questions about wrapping a Nissan Largo

How much vinyl does it take to wrap a Nissan Largo?

A full vinyl wrap on a Nissan Largo takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film for the newest body, the third generation. This figure covers the exterior panels excluding the door tracks, which stay bare. Chrome or patterned film on the same van needs about 72 ft (22 m) because of extra waste from pattern matching.

Are the sliding doors of a Largo wrapped?

Yes, the sliding doors of a Largo are wrapped, but the door tracks stay bare and the film is cut along them. The film covers the door panel up to the edge of the track, leaving the metal track exposed for smooth operation. This applies to all three generations, from the first van of 1982 to the last one of 2022.

Which years of the Largo take the same film cuts?

The third generation Largo from 1993 to 2022 takes the same film cuts, including the 1996 restyle. The first generation (1982–1987) and the second generation (1986–1993) each have their own panel shapes, so cuts differ between generations. Within the first and second generations, all years share the same cuts because there were no mid-cycle restyles.

Can I wrap only the hood or the roof of a Largo?

Yes, you can wrap only the hood or the roof of a Largo, as a partial wrap covers the roof, hood, or mirror caps. A chrome delete is another smaller job that covers the window trim and badges with black film. Paint protection film (PPF) is a clear option for just the front end. These jobs use less film than a full wrap and can be done on any generation.