Wraps by car

Nissan Leopard wrap

This page covers the Nissan Leopard wrap across all four generations of the full-size model. The newest body, the fourth generation from 1996 to 1999, needs about 52 ft (16 m) of 60-inch (1.52 m) cast film for a full vinyl wrap. Chrome or patterned film on the same car takes about 61 ft (18.5 m).

4generations16 mof film for a full wrap

Nissan Leopard, fourth generation, factory photo
Nissan Leopard, fourth generation. Factory color shown.

Nissan Leopard wrap colors and ideas

  • Leopard black wrap
  • Leopard white wrap
  • Leopard gray wrap
  • Leopard silver wrap
  • Leopard red wrap
  • Leopard blue wrap
  • Leopard green wrap
  • Leopard yellow wrap
  • Leopard orange wrap
  • Leopard purple wrap
  • Leopard pink wrap
  • Leopard teal wrap
  • Leopard brown wrap
  • Leopard gold wrap
  • Leopard chrome wrap
  • Leopard color shift wrap
  • Leopard carbon fiber wrap
  • Leopard camo and patterned wrap

How much vinyl to wrap a Nissan Leopard

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1996–1999sedan (4 doors)192.7 in (4,895 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)
1992–1996sedan (4 doors)192.1 in (4,880 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)
1986–1992coupe (2 doors)189.2 in (4,805 mm)about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)
1980–1986coupe, sedan (2 or 4 doors)182.3 in (4,630 mm)about 48 ft (14.5 m) for the coupe to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m)

Leopard wrap cost factors

A Leopard wrap cost depends on the generation, the body style and the film you choose. A first generation sedan covers more area than the coupe and takes more material, while the fourth generation sedan needs the largest amount of cast film. Chrome or patterned film adds a higher material volume than a solid color on the same body. The number of cut-outs, such as badges and trim, also changes the labor time.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: sedan (4 doors).

Leopard wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan Leopard, fourth generation, factory photo
Factory color shown

1996–1999 Leopard sedan (fourth generation)

1996–1999sedan (4 doors)192.7 in (4,895 mm)

The fourth generation Nissan Leopard from 1996 to 1999 has one sedan body with a length of 192.7 in (4,895 mm). Paint age on a car of these years is often mixed, with panels that may be original or repainted. A test spot on each panel comes before a full wrap to check adhesion on older paint.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Nissan Leopard, third generation, factory photo
Factory color shown

1992–1996 Leopard sedan (third generation)

1992–1996sedan (4 doors)192.1 in (4,880 mm)

The third generation Nissan Leopard from 1992 to 1996 is a full-size sedan that is 192.1 in (4,880 mm) long. Its large, flat side panels allow the wrap to be split into manageable pieces, and the four doors add more seams than a coupe. The film estimate of about 48 ft (14.5 m) reflects the sedan's panel count.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Nissan Leopard, second generation, factory photo
Factory color shown

1986–1992 Leopard coupe (second generation)

1986–1992coupe (2 doors)189.2 in (4,805 mm)

The second generation Nissan Leopard from 1986 to 1992 is a full-size coupe with a body length of 189.2 in (4,805 mm). The two long doors are each covered with one large piece of film, which reduces the number of seams on the sides. Its shorter overall length leads to a lower film amount of about 43 ft (13 m).

Two long side doors: each door is one large piece of film.

Film: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Nissan Leopard, first generation, factory photo
Factory color shown

1980–1986 Leopard coupe, sedan (first generation)

1980–1986coupe, sedan (2 or 4 doors)182.3 in (4,630 mm)

The first generation Nissan Leopard from 1980 to 1986 offered both a coupe and a sedan, and the body style decides the panel plan and the film amount. The coupe is shorter and has two doors, needing about 48 ft (14.5 m) of film, while the sedan adds rear doors and takes up to 51 ft (15.5 m). A sedan roof is often longer, so the roof panel is split into two pieces for easier handling.

Film: about 48 ft (14.5 m) for the coupe to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Leopard

A partial wrap on a Nissan Leopard can cover the roof, hood or mirror caps in a color change film. Leopard chrome delete covers the window trim and badges with black film for a cleaner look. Paint protection film is also used on the front end as clear film to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Nissan Leopard: body, cut-outs and film

The Nissan Leopard vinyl wrap is planned around a full-size body that reaches 192.7 in (4,895 mm) on the fourth generation. Every generation has large hood, roof and quarter panels, so most film goes onto long flat areas. The first generation offered both coupe and sedan bodies, and the coupe needs roughly 48 ft (14.5 m) while the sedan needs up to 51 ft (15.5 m). Panel sizes stay close between the third and fourth generations, which keeps film estimates similar.

Leopard wrap ideas begin with the door count of each generation, because longer doors change how the film is laid. The second generation coupe has two long side doors, each done as one large piece of film for a clean look. On the sedans the four door skins can be wrapped separately, and the window trim and badges are typical chrome delete areas. The front bumper, mirrors and door handles are removed or masked for clean edges.

If you are counting how much vinyl to wrap a Leopard, the production years matter more than the model name. The third generation sedan is close to the fourth in size but is estimated at about 48 ft (14.5 m) of cast film, while the second generation coupe takes about 43 ft (13 m). The first generation is the shortest body at 182.3 in (4,630 mm), yet the sedan can still need about 51 ft (15.5 m). Always measure the actual car, as repainted panels or body kits change the film amount.

Questions about wrapping a Nissan Leopard

How much vinyl does it take to wrap a Nissan Leopard?

A full wrap of the newest Nissan Leopard, the fourth generation sedan, takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. If you use chrome or patterned film, plan for about 61 ft (18.5 m).

Can I wrap only the hood or the roof of a Leopard?

Yes, you can wrap only the hood or the roof of a Leopard. A partial wrap on this car typically covers the roof, hood or mirror caps, and chrome delete is another smaller job for the window trim and badges.

Is a Leopard hard to wrap?

A Leopard is not hard to wrap, but some parts add work. The second generation coupe has two long doors that are each done as one large piece, which needs careful handling. The full-size body means long roof and quarter panels, so a second pair of hands helps.

How many generations of the Leopard does this page cover?

This page covers four generations of the Nissan Leopard. They run from the first generation of 1980–1986 through the fourth generation of 1996–1999.