Wraps by car

Nissan Liberta Villa wrap

The Nissan Liberta Villa wrap page covers the compact car from its first two generations. The catalog includes the first-generation sedan and the second-generation hatchback and sedan bodies. A full vinyl wrap of the newest body takes about 46 ft (14 m) to 48 ft (14.5 m) of 60-inch (1.52 m) cast film.

2generations14.5 mof film for a full wrap

Nissan Liberta Villa, second generation, factory photo
Nissan Liberta Villa, second generation. Factory color shown.

Nissan Liberta Villa wrap colors and ideas

  • Liberta Villa black wrap
  • Liberta Villa white wrap
  • Liberta Villa gray wrap
  • Liberta Villa silver wrap
  • Liberta Villa red wrap
  • Liberta Villa blue wrap
  • Liberta Villa green wrap
  • Liberta Villa yellow wrap
  • Liberta Villa orange wrap
  • Liberta Villa purple wrap
  • Liberta Villa pink wrap
  • Liberta Villa teal wrap
  • Liberta Villa brown wrap
  • Liberta Villa gold wrap
  • Liberta Villa chrome wrap
  • Liberta Villa color shift wrap
  • Liberta Villa carbon fiber wrap
  • Liberta Villa camo and patterned wrap

How much vinyl to wrap a Nissan Liberta Villa

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1986–1990hatchback, sedan (3 or 4 doors)158.9 in (4,035 mm) to 167.5 in (4,255 mm)about 46 ft (14 m) for the hatchback to 48 ft (14.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m)
1982–1986sedan (4 doors)162.2 in (4,120 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Liberta Villa wrap cost factors

Liberta Villa wrap cost depends on the film type, body style, and the condition of the panels. A second-generation hatchback takes about 46 ft (14 m) of 60-inch (1.52 m) cast film, while the longer sedan takes about 48 ft (14.5 m). Chrome or patterned film raises the amount to as much as about 59 ft (18 m) on the second generation. The wrap installer's time for cut-outs and tailgate work also affects the final cost.

  • Film for a full wrap: about 46 ft (14 m) for the hatchback to 48 ft (14.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m).
  • Body: hatchback, sedan (3 or 4 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Liberta Villa wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan Liberta Villa, second generation, factory photo
Factory color shown

1986–1990 Liberta Villa hatchback, sedan (second generation)

1986–1990hatchback, sedan (3 or 4 doors)158.9 in (4,035 mm) to 167.5 in (4,255 mm)

The second-generation Nissan Liberta Villa offers hatchback and sedan body styles, and the style decides the panel plan and the film amount. The hatchback measures from 158.9 in (4,035 mm) to 167.5 in (4,255 mm) and needs about 46 ft (14 m) of 60-inch (1.52 m) cast film for a full wrap. The sedan of the same generation needs about 48 ft (14.5 m) because of its larger rear deck and different panel layout. A hatchback tailgate with the rear glass built in also changes how the film is cut around the glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 46 ft (14 m) for the hatchback to 48 ft (14.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m).

Nissan Liberta Villa, first generation, factory photo
Factory color shown

1982–1986 Liberta Villa sedan (first generation)

1982–1986sedan (4 doors)162.2 in (4,120 mm)

The first-generation Nissan Liberta Villa is a four-door sedan from 1982 to 1986, and paint age matters before a full wrap. On a car of these years, panels may be original or repainted, and a test spot comes before a full wrap. The body is 162.2 in (4,120 mm) long, and a wrap uses about 46 ft (14 m) of 60-inch (1.52 m) cast film. The film estimate assumes the panels are smooth and free of loose paint.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Liberta Villa

Partial wrap options for the Nissan Liberta Villa include the roof, hood, and mirror caps. Chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear layer installed on the front end to guard against stone chips. These partial jobs are good ways to change the look without a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Nissan Liberta Villa: body, cut-outs and film

The Nissan Liberta Villa vinyl wrap plan changes with the body style and its length. The second-generation hatchback and sedan measure from 158.9 in (4,035 mm) to 167.5 in (4,255 mm). The first-generation sedan is 162.2 in (4,120 mm) long. These compact dimensions keep the wrap area similar to other small cars of the period.

Liberta Villa wrap ideas often start with the tailgate on second-generation hatchback models. The rear glass sits inside the tailgate, so the film ends at the edge of the glass. On the hatchback the roof section flows into the tailgate as one piece. Sedan versions use a separate trunk lid that allows a clean panel break.

How much vinyl to wrap a Liberta Villa depends on the generation and body style. A first-generation sedan needs about 46 ft (14 m) of 60-inch (1.52 m) cast film for a full color change. The second-generation hatchback starts at the same 46 ft (14 m) figure. The longer second-generation sedan uses about 48 ft (14.5 m).

Questions about wrapping a Nissan Liberta Villa

How much vinyl does it take to wrap a Nissan Liberta Villa?

A full Nissan Liberta Villa wrap takes about 46 ft (14 m) to 48 ft (14.5 m) of 60-inch (1.52 m) cast vinyl film for the newest body. The hatchback starts at about 46 ft (14 m), and the longer sedan uses about 48 ft (14.5 m). Actual film use varies with the installer's waste and the film pattern.

Which Liberta Villa body takes more film?

The second-generation Nissan Liberta Villa sedan takes more film than the hatchback. The sedan needs about 48 ft (14.5 m) of 60-inch (1.52 m) cast film, while the hatchback uses about 46 ft (14 m). The difference comes from the sedan's longer rear deck and separate trunk panels.

Can I wrap only the hood or the roof of a Liberta Villa?

Yes, you can wrap only the hood or the roof of a Nissan Liberta Villa. A partial wrap can cover the roof, hood, or mirror caps, and the wrap film is cut to the panel edges. Chrome delete on the window trim and badges is another small job. These partial wraps use less film than a full color change.

Is a Liberta Villa hard to wrap?

The Nissan Liberta Villa is moderately hard to wrap because of its size and the hatchback tailgate. On the second-generation hatchback, the rear glass is part of the tailgate, so the film must end cleanly at the glass edge. The compact body length from 158.9 in (4,035 mm) to 167.5 in (4,255 mm) means some panels are small and curved. A first-generation sedan from 1982 to 1986 may need paint checks before the film goes on.