Wraps by car

Nissan Lucino wrap

This page covers the Nissan Lucino wrap, a compact car sold from 1994 to 2000. The catalog includes one generation of the Lucino. A full vinyl wrap of the newest body takes about 39 ft (12 m) to 41 ft (12.5 m) of 60-inch (1.52 m) cast film.

1generations12.5 mof film for a full wrap

Nissan Lucino, first generation, factory photo
Nissan Lucino, first generation. Factory color shown.

Nissan Lucino wrap colors and ideas

  • Lucino black wrap
  • Lucino white wrap
  • Lucino gray wrap
  • Lucino silver wrap
  • Lucino red wrap
  • Lucino blue wrap
  • Lucino green wrap
  • Lucino yellow wrap
  • Lucino orange wrap
  • Lucino purple wrap
  • Lucino pink wrap
  • Lucino teal wrap
  • Lucino brown wrap
  • Lucino gold wrap
  • Lucino chrome wrap
  • Lucino color shift wrap
  • Lucino carbon fiber wrap
  • Lucino camo and patterned wrap

How much vinyl to wrap a Nissan Lucino

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1994–2000coupe, hatchback (2 or 3 or 5 doors)163.0 in (4,140 mm) to 168.7 in (4,285 mm)about 39 ft (12 m) for the coupe to 41 ft (12.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 54 ft (16.5 m)

Lucino wrap cost factors

Lucino wrap cost depends on the film type, the body style, and the installer's labor. A full wrap of the coupe uses about 39 ft (12 m) of 60-inch film, while the hatchback uses about 41 ft (12.5 m). Cast film costs more than calendered film, and patterned or chrome film requires more material. The number of cutouts, such as the tailgate glass, also affects installation time.

  • Film for a full wrap: about 39 ft (12 m) for the coupe to 41 ft (12.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 54 ft (16.5 m).
  • Body: coupe, hatchback (2 or 3 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Lucino wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan Lucino, first generation, factory photo
Factory color shown

1994–2000 Lucino coupe, hatchback (first generation)

1994–2000coupe, hatchback (2 or 3 or 5 doors)163.0 in (4,140 mm) to 168.7 in (4,285 mm)

The first-generation Nissan Lucino came in coupe and hatchback body styles. The coupe has a fixed trunk lid, while the hatchback has a large rear opening with the glass in the tailgate. The panel plan differs because the hatchback tailgate is one large piece that must be wrapped around the glass edges. This generation spans 1994 to 2000.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 39 ft (12 m) for the coupe to 41 ft (12.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a Lucino

A partial wrap on a Lucino can cover the roof, hood, or mirror caps. Lucino chrome delete involves covering the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These jobs use less material than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Nissan Lucino: body, cut-outs and film

The Nissan Lucino was offered as a coupe and a hatchback with two, three, or five doors. The hatchback has a tailgate with the rear glass in it, so the film ends at the edge of the glass. The coupe is 163.0 in (4,140 mm) long and the hatchback is up to 168.7 in (4,285 mm) long. These body styles and lengths affect the panel plan and the total film needed for a wrap.

When wrapping a Lucino, the tailgate requires careful cutting around the rear glass. The film ends at the edge of the glass, so no film covers the glass itself. Door handles, mirrors, and badges are removed or masked for a clean installation. For Lucino wrap ideas, you can choose a color change wrap, a chrome delete on the window trim, or a partial wrap on the roof and hood.

The Lucino was produced from 1994 to 2000 as a coupe and a hatchback. The hatchback body is longer and has more surface area than the coupe. If you need to know how much vinyl to wrap a Lucino, the coupe takes about 39 ft (12 m) and the hatchback takes about 41 ft (12.5 m). A chrome or patterned film may require up to about 54 ft (16.5 m).

Questions about wrapping a Nissan Lucino

How much vinyl does it take to wrap a Nissan Lucino?

A full wrap of a Nissan Lucino takes about 39 ft (12 m) to 41 ft (12.5 m) of 60-inch (1.52 m) cast film. The exact amount depends on the body style and the film pattern. The coupe needs about 39 ft (12 m) and the hatchback about 41 ft (12.5 m). Chrome or patterned film may require up to about 54 ft (16.5 m).

Which Lucino body takes more film?

The hatchback takes more film than the coupe. The hatchback uses about 41 ft (12.5 m) of 60-inch cast film, while the coupe uses about 39 ft (12 m). The hatchback body is longer and has a larger tailgate area.

Can I wrap only the hood or the roof of a Lucino?

Yes, you can wrap only the hood or the roof of a Lucino. A partial wrap can cover the roof, hood, or mirror caps. This is a smaller job that requires less film than a full wrap.

Is a Lucino hard to wrap?

The Lucino is not especially hard to wrap, but the tailgate with the rear glass in it adds work. The film must be cut precisely along the edge of the glass. The body is compact, so large flat panels are limited. Installing chrome delete on the window trim and badges also requires careful trimming.