Wraps by car

Nissan Pao wrap

A Nissan Pao wrap covers this subcompact hatchback with vinyl film. The Pao was produced for one generation, from 1989 to 1990. A full wrap of the newest body takes about 43 ft (13 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 49 ft (15 m).

1generations13 mof film for a full wrap

Nissan Pao, first generation, factory photo
Nissan Pao, first generation. Factory color shown.

Nissan Pao wrap colors and ideas

  • Pao black wrap
  • Pao white wrap
  • Pao gray wrap
  • Pao silver wrap
  • Pao red wrap
  • Pao blue wrap
  • Pao green wrap
  • Pao yellow wrap
  • Pao orange wrap
  • Pao purple wrap
  • Pao pink wrap
  • Pao teal wrap
  • Pao brown wrap
  • Pao gold wrap
  • Pao chrome wrap
  • Pao color shift wrap
  • Pao carbon fiber wrap
  • Pao camo and patterned wrap

How much vinyl to wrap a Nissan Pao

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1989–1990hatchback (3 doors)147.2 in (3,740 mm)about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m)

Pao wrap cost factors

Pao wrap cost depends on the amount of film, condition of the paint, and labor for removal. A full wrap uses about 43 ft (13 m) of 60-inch (1.52 m) cast film, or about 49 ft (15 m) of chrome or patterned film. Prepping old paint and taking off trim add time. A partial wrap uses less film and lower labor.

  • Film for a full wrap: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.

Pao wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan Pao, first generation, factory photo
Factory color shown

1989–1990 Pao hatchback (first generation)

1989–1990hatchback (3 doors)147.2 in (3,740 mm)

The first generation Nissan Pao was built from 1989 to 1990 as a hatchback with three doors. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. The body code is PK10. Its length is 147.2 in (3,740 mm).

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).

Roof, hood, chrome delete and PPF on a Pao

Partial wrap options for a Nissan Pao include the roof, hood, and mirror caps in vinyl. Pao chrome delete covers window trim and badges with black film. Paint protection film can be applied as a clear film on the front end. These jobs need less material than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Nissan Pao: body, cut-outs and film

The Nissan Pao vinyl wrap is shaped by a small three-door hatchback body. The car is 147.2 in (3,740 mm) long. Short panels and a mostly flat profile mean less film waste than on a long sedan. The tailgate and two long side doors are the largest surfaces to cover.

Pao wrap ideas should account for the tailgate with rear glass set into it. The film ends at the edge of the glass, so the gate needs one careful piece. Each long side door is also one large piece of film. Handles and mirrors are removed for a clean edge.

How much vinyl to wrap a Pao depends on film choice and panel condition. Cast film needs about 43 ft (13 m) in 60-inch (1.52 m) width. Chrome or patterned film has more waste, so plan for about 49 ft (15 m). Ordering extra for mistakes on curved corners is good practice.

Questions about wrapping a Nissan Pao

How much vinyl does it take to wrap a Nissan Pao?

A Nissan Pao takes about 43 ft (13 m) of 60-inch (1.52 m) cast film for a full wrap. Chrome or patterned film increases the estimate to about 49 ft (15 m). These figures are for the newest body, the hatchback produced from 1989 to 1990.

Can I wrap only the hood or the roof of a Pao?

Yes, you can wrap only the hood or the roof of a Pao. Partial wrap options include the roof, hood, and mirror caps. These smaller jobs use less film and less labor than a full wrap.

Is a Pao hard to wrap?

A Pao has two long side doors, each one large piece of film, which adds work. The tailgate has the rear glass in it, so the film ends at the edge of the glass. The car is 147.2 in (3,740 mm) long, a compact size that makes reaching the roof easier.

How many generations of the Pao does this page cover?

This page covers one generation of the Pao. The first generation was produced from 1989 to 1990 as a hatchback with three doors. There are no other generations in the catalog.