Wraps by car

Nissan Prairie wrap

The Nissan Prairie wrap page covers all three generations of this minivan and lists the vinyl wrap amounts for a full color change. A complete wrap of the newest body takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. The Prairie was sold as a five-door van in every generation.

3generations19.5 mof film for a full wrap

Nissan Prairie, third generation, factory photo
Nissan Prairie, third generation. Factory color shown.

Nissan Prairie wrap colors and ideas

  • Prairie black wrap
  • Prairie white wrap
  • Prairie gray wrap
  • Prairie silver wrap
  • Prairie red wrap
  • Prairie blue wrap
  • Prairie green wrap
  • Prairie yellow wrap
  • Prairie orange wrap
  • Prairie purple wrap
  • Prairie pink wrap
  • Prairie teal wrap
  • Prairie brown wrap
  • Prairie gold wrap
  • Prairie chrome wrap
  • Prairie color shift wrap
  • Prairie carbon fiber wrap
  • Prairie camo and patterned wrap

How much vinyl to wrap a Nissan Prairie

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1998–2004van (5 doors)178.9 in (4,545 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)
1988–1995van (5 doors)171.3 in (4,350 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)
1982–1988van (5 doors)170.3 in (4,326 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Prairie wrap cost factors

Prairie wrap cost depends on the generation, the film type, and the shop's labor. The largest third generation needs about 64 ft (19.5 m) of film, while the second uses about 54 ft (16.5 m). Chrome or patterned film adds about 10 ft (3 m) to each job.

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Prairie wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan Prairie, third generation, factory photo
Factory color shown

1998–2004 Prairie van (third generation)

1998–2004van (5 doors)178.9 in (4,545 mm)

The third-generation Prairie has sliding side doors whose tracks stay bare and decide where the film is cut. The van measures 178.9 in (4,545 mm) long and needs about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the amount to about 74 ft (22.5 m).

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Nissan Prairie, second generation, factory photo
Factory color shown

1988–1995 Prairie van (second generation)

1988–1995van (5 doors)171.3 in (4,350 mm)

The second-generation Prairie is from 1988–1995, so paint age matters before a wrap. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. This generation is 171.3 in (4,350 mm) long and takes about 54 ft (16.5 m) of film.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Nissan Prairie, first generation, factory photo
Factory color shown

1982–1988 Prairie van (first generation)

1982–1988van (5 doors)170.3 in (4,326 mm)

The first-generation Prairie is a five-door van measuring 170.3 in (4,326 mm) long. Its boxy shape and large side panels call for about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. The sliding doors add cut lines along the tracks, which increases labor.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Prairie

A partial wrap on a Prairie can cover the roof, hood, or mirror caps. Prairie chrome delete covers window trim and badges with black film. Paint protection film (PPF) is a clear film often applied to the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Nissan Prairie: body, cut-outs and film

A Nissan Prairie vinyl wrap involves large flat side panels and a tall roof, so the body style adds surface area. The third generation measures 178.9 in (4,545 mm) long, while the first and second are shorter. All generations have sliding side doors that require careful cut lines around the tracks.

Prairie wrap ideas often start with the sliding side doors, because the door tracks stay bare and the film is cut along them. Door handles, mirrors, and badges come off for a clean install. The tailgate and hood edges need extra relief cuts to prevent lifting.

How much vinyl to wrap a Prairie depends on the generation, since the length grows from 170.3 in (4,326 mm) to 178.9 in (4,545 mm). The newest body needs about 64 ft (19.5 m) of 60-inch (1.52 m) cast film, while the second generation uses about 54 ft (16.5 m). The first generation falls in between at about 61 ft (18.5 m).

Questions about wrapping a Nissan Prairie

How much vinyl does it take to wrap a Nissan Prairie?

A full wrap of a third-generation Nissan Prairie takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 74 ft (22.5 m). Older generations use slightly less or nearly the same amount.

Are the sliding doors of a Prairie wrapped?

Yes, the sliding doors of a Prairie are wrapped, but the door tracks stay bare. The film is cut along the tracks to allow movement. This creates a clean edge that follows the body line.

Can I wrap only the hood or the roof of a Prairie?

Yes, you can wrap only the hood or the roof of a Prairie. Partial wrap jobs also include mirror caps. These smaller areas use far less film than a full color change wrap.

Is a Prairie hard to wrap?

A Prairie is moderately hard to wrap because of its size and sliding side doors. The door tracks must stay bare, so the film is cut along them. The large roof and tall sides add extra work compared to a small car.