Wraps by car

Nissan Presea wrap

The Nissan Presea wrap page covers both generations of this compact sedan, the first from 1990–1994 and the second from 1995–2000. A full vinyl wrap of the newer body takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. The older body is slightly shorter and takes about 41 ft (12.5 m) of the same film.

2generations13.5 mof film for a full wrap

Nissan Presea, second generation, factory photo
Nissan Presea, second generation. Factory color shown.

Nissan Presea wrap colors and ideas

  • Presea black wrap
  • Presea white wrap
  • Presea gray wrap
  • Presea silver wrap
  • Presea red wrap
  • Presea blue wrap
  • Presea green wrap
  • Presea yellow wrap
  • Presea orange wrap
  • Presea purple wrap
  • Presea pink wrap
  • Presea teal wrap
  • Presea brown wrap
  • Presea gold wrap
  • Presea chrome wrap
  • Presea color shift wrap
  • Presea carbon fiber wrap
  • Presea camo and patterned wrap

How much vinyl to wrap a Nissan Presea

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1995–2000sedan (4 doors)176.4 in (4,480 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)
1990–1994sedan (4 doors)173.0 in (4,395 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Presea wrap cost factors

Presea wrap cost depends on the amount of film, the complexity of the body, and the condition of the paint. The estimate is 44 ft (13.5 m) for the second generation and 41 ft (12.5 m) for the first, which sets the material quantity. A partial job uses less film, while paint correction before wrapping adds labor.

  • Film for a full wrap: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: sedan (4 doors).

Presea wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan Presea, second generation, factory photo
Factory color shown

1995–2000 Presea sedan (second generation)

1995–2000sedan (4 doors)176.4 in (4,480 mm)

The second-generation Nissan Presea, built from 1995 to 2000, often has original or repainted panels after decades of use. A test spot on each panel shows whether the film will adhere evenly to old paint. If the surface is rough or peeling, sanding and priming may be needed before the wrap.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Nissan Presea, first generation, factory photo
Factory color shown

1990–1994 Presea sedan (first generation)

1990–1994sedan (4 doors)173.0 in (4,395 mm)

The first-generation Nissan Presea, from 1990 to 1994, is a compact sedan at 173.0 in (4,395 mm) long, so the film estimate is about 41 ft (12.5 m). The four-door body has the usual number of panels: roof, hood, trunk, four doors, fenders and bumpers. Smaller panels mean less waste, but the older body may have more contours around the lights and trim.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Presea

A partial wrap on a Presea can cover just the roof, hood, or mirror caps, using less film than a full wrap. A Presea chrome delete covers the window trim and badges with black film for a different look. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Nissan Presea: body, cut-outs and film

The Nissan Presea vinyl wrap suits a compact four-door sedan with a length of 176.4 in (4,480 mm) for the second generation and 173.0 in (4,395 mm) for the first. Both generations have four doors, so the main panels to cover are the roof, hood, trunk, fenders and door skins. The car has no long roof or tall sides, which keeps the job manageable for one installer.

Presea wrap ideas include covering the whole body, a partial wrap, or a chrome delete on the window trim and badges. Door handles, mirrors and badges should come off for a clean install, while the bumpers need careful trimming around grilles and fog light openings. The antenna and side moldings are also removed to avoid visible edges.

How much vinyl to wrap a Presea depends on the generation: the second generation needs about 44 ft (13.5 m) and the first about 41 ft (12.5 m) of 60-inch film. Both figures are for a full color change with standard cast film. Chrome or patterned film requires about 56 ft (17 m) on either generation because of pattern matching and extra waste.

Questions about wrapping a Nissan Presea

How much vinyl does it take to wrap a Nissan Presea?

It takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film to wrap a Nissan Presea from the second generation. The first generation takes about 41 ft (12.5 m) of the same film. Chrome or patterned film needs about 56 ft (17 m) because of matching and waste.

Can I wrap only the hood or the roof of a Presea?

Yes, you can wrap only the hood or the roof of a Presea. Partial wrap options on this car include the roof, hood, and mirror caps. A chrome delete covers the window trim and badges. Paint protection film is also applied just to the front end.

Is a Presea hard to wrap?

A Presea is not especially hard to wrap, but the older paint needs attention. The car is a compact sedan, so the panels are of average size and the roof is easy to reach. The main extra work is removing door handles, mirrors and badges, and test spots on old paint.

How many generations of the Presea does this page cover?

This page covers two generations of the Nissan Presea. The first generation ran from 1990 to 1994 and the second from 1995 to 2000. Both are compact four-door sedans.