Wraps by car

Nissan President wrap

The Nissan President wrap page covers all three generations of this luxury sedan, ending with the 2003–2010 PGF50 body. A full vinyl wrap of the newest President takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, plan for about 62 ft (19 m).

3generations16.5 mof film for a full wrap

Nissan President, third generation, factory photo
Nissan President, third generation. Factory color shown.

Nissan President wrap colors and ideas

  • President black wrap
  • President white wrap
  • President gray wrap
  • President silver wrap
  • President red wrap
  • President blue wrap
  • President green wrap
  • President yellow wrap
  • President orange wrap
  • President purple wrap
  • President pink wrap
  • President teal wrap
  • President brown wrap
  • President gold wrap
  • President chrome wrap
  • President color shift wrap
  • President carbon fiber wrap
  • President camo and patterned wrap

How much vinyl to wrap a Nissan President

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2003–2010sedan (4 doors)199.2 in (5,060 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)
1990–2002sedan (4 doors)205.7 in (5,225 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)
1973–1990sedan (4 doors)207.9 in (5,280 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

President wrap cost factors

President wrap cost depends on the generation, the film type, and the condition of the paint. The first generation is 207.9 in (5,280 mm) long and uses about 10 ft (3 m) more film than the third generation. A color change wrap with chrome film costs more in material than a standard cast film, and paint correction before wrapping adds labor.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: sedan (4 doors).

President wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan President, third generation, factory photo
Factory color shown

2003–2010 President sedan (third generation)

2003–2010sedan (4 doors)199.2 in (5,060 mm)

The third-generation Nissan President (2003–2010) has paint that may be original or repainted, so a test spot is needed before a full wrap. On this 199.2 in (5,060 mm) sedan, a full wrap uses about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. The PGF50 body has fewer chrome pieces than older generations, which reduces cut-out time.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Nissan President, second generation, factory photo
Factory color shown

1990–2002 President sedan (second generation)

1990–2002sedan (4 doors)205.7 in (5,225 mm)

The second-generation Nissan President (1990–2002) is 205.7 in (5,225 mm) long, so it needs about the same 54 ft (16.5 m) of 60-inch (1.52 m) cast film as the newest body. The HG50 sedan has four doors and a long roof, and the chrome beltline adds cut-out work. You can wrap the whole car with standard film or choose chrome film, which brings the total to about 64 ft (19.5 m).

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Nissan President, first generation, factory photo
Factory color shown

1973–1990 President sedan (first generation)

1973–1990sedan (4 doors)207.9 in (5,280 mm)

The first-generation Nissan President (1973–1990) is the longest at 207.9 in (5,280 mm), and its wrap estimate is about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, the total reaches about 74 ft (22.5 m). The 250 body has four doors and a large trunk lid, so the wrap is split into more panels.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a President

A partial wrap on a President can cover the roof, hood, or mirror caps, and it uses a fraction of the full wrap film. President chrome delete covers the window trim and badges with black film, and it is a good way to change the look without wrapping the whole car. Paint protection film (PPF) on the front end is a clear option that shields the hood, bumper, and fenders.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Nissan President: body, cut-outs and film

Every generation is a four-door sedan, and the newest body is 199.2 in (5,060 mm) long, which is compact for a luxury car. The older generations are longer: 205.7 in (5,225 mm) for the second and 207.9 in (5,280 mm) for the first. That length adds panels and film, so a first-generation wrap needs about 64 ft (19.5 m) of standard film. For a Nissan President vinyl wrap, the sedan shape means large roof and door areas with few complex curves.

President wrap ideas start with the long chrome beltline and window trim on all generations. The door handles, badges, and front grille need cut-outs or removal for a clean install. On the third-generation PGF50, the bumper covers and side mirrors can be wrapped on the car, but the grille surround is easier with the part off.

If you are figuring how much vinyl to wrap a President, the generation decides the film estimate. A third-generation car needs about 54 ft (16.5 m) of 60-inch (1.52 m) cast film, while the first generation needs about 64 ft (19.5 m). Chrome or patterned film adds about 8 ft (2.4 m) on the newest body and about 10 ft (3 m) on the first generation.

Questions about wrapping a Nissan President

How much vinyl does it take to wrap a Nissan President?

A third-generation Nissan President takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film for a full wrap. With chrome or patterned film, the estimate is about 62 ft (19 m). The first generation needs about 64 ft (19.5 m) of standard film.

Can I wrap only the hood or the roof of a President?

Yes, you can wrap only the hood or the roof of a President. A partial wrap on the roof, hood, or mirror caps uses less film than a full wrap. Chrome delete on the window trim and badges is another smaller job.

Is a President hard to wrap?

A President is not especially hard to wrap, but the length of the first generation (207.9 in / 5,280 mm) adds work. The chrome trim on all generations needs careful cut-outs, and the old paint may need a test spot before film is applied.

How many generations of the President does this page cover?

This page covers three generations of the Nissan President: the first (1973–1990), the second (1990–2002), and the third (2003–2010).