Wraps by car

Nissan Pulsar wrap

The Nissan Pulsar wrap page covers all six generations of this compact car, from the second generation of 1982 through the sixth generation of 2018. A full vinyl wrap of the newest Pulsar body takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. Chrome or patterned film increases that estimate to about 66 ft (20 m). Each generation's dimensions and body styles affect how the wrap is planned.

6generations17 mof film for a full wrap

Nissan Pulsar, sixth generation, factory photo
Nissan Pulsar, sixth generation. Factory color shown.

Nissan Pulsar wrap colors and ideas

  • Pulsar black wrap
  • Pulsar white wrap
  • Pulsar gray wrap
  • Pulsar silver wrap
  • Pulsar red wrap
  • Pulsar blue wrap
  • Pulsar green wrap
  • Pulsar yellow wrap
  • Pulsar orange wrap
  • Pulsar purple wrap
  • Pulsar pink wrap
  • Pulsar teal wrap
  • Pulsar brown wrap
  • Pulsar gold wrap
  • Pulsar chrome wrap
  • Pulsar color shift wrap
  • Pulsar carbon fiber wrap
  • Pulsar camo and patterned wrap

How much vinyl to wrap a Nissan Pulsar

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–2018hatchback (5 doors)172.7 in (4,387 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)
1995–2000hatchback, sedan (3 or 4 or 5 doors)162.2 in (4,120 mm) to 170.5 in (4,330 mm)about 41 ft (12.5 m) for the sedan to 48 ft (14.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m)
1990–1994hatchback, sedan (3 or 4 or 5 doors)156.5 in (3,975 mm) to 165.9 in (4,215 mm)about 39 ft (12 m) for the sedan to 46 ft (14 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m)
1986–1990hatchback, sedan (3 or 4 or 5 doors)158.7 in (4,030 mm) to 165.9 in (4,215 mm)about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)
1982–1986convertible, coupe, hatchback, sedan (2 or 3 or 4 or 5 doors)155.9 in (3,960 mm) to 156.3 in (3,970 mm)about 43 ft (13 m) for the convertible to 46 ft (14 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m)
1978–1982coupe, hatchback, wagon (2 or 3 or 5 doors)153.1 in (3,890 mm)about 41 ft (12.5 m) for the coupe to 48 ft (14.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m)

Pulsar wrap cost factors

Pulsar wrap cost depends on the car's generation, its body style, and the amount of film needed for the job. A sixth generation hatchback requires about 56 ft (17 m) of film, while a fifth generation sedan needs only about 41 ft (12.5 m). The condition of the paint also matters, especially on older generations that may have repainted panels. The choice of finish, such as a chrome or patterned film, raises the film amount to up to 66 ft (20 m) on the newest body.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Pulsar wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan Pulsar, sixth generation, factory photo
Factory color shown

2014–2018 Pulsar hatchback (sixth generation)

2014–2018hatchback (5 doors)172.7 in (4,387 mm)

The sixth generation Nissan Pulsar from 2014–2018 is a five-door hatchback with a length of 172.7 in (4,387 mm), which sets a larger panel count than earlier generations. A full wrap of this body takes about 56 ft (17 m) of 60-inch cast film, or about 66 ft (20 m) for chrome or patterned film. The tailgate includes the rear glass, so the film ends at the edge of the glass. This generation's size makes it a straightforward compact car wrap with no unusual body lines.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Nissan Pulsar, fifth generation, factory photo
Factory color shown

1995–2000 Pulsar hatchback, sedan (fifth generation)

1995–2000hatchback, sedan (3 or 4 or 5 doors)162.2 in (4,120 mm) to 170.5 in (4,330 mm)

The fifth generation Pulsar from 1995–2000 offers hatchback and sedan body styles, and the style decides the panel plan and film amount. The sedan needs about 41 ft (12.5 m) of 60-inch cast film, while the hatchback needs about 48 ft (14.5 m). Both styles have a tailgate with the rear glass in it, so the film ends at the edge of the glass. Sedan trunk lids wrap as separate panels, while the hatchback tailgate is one larger panel.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 41 ft (12.5 m) for the sedan to 48 ft (14.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m).

Nissan Pulsar, fourth generation, factory photo
Factory color shown

1990–1994 Pulsar hatchback, sedan (fourth generation)

1990–1994hatchback, sedan (3 or 4 or 5 doors)156.5 in (3,975 mm) to 165.9 in (4,215 mm)

On the fourth generation Pulsar from 1990–1994, paint age matters because panels may be original or repainted after years of use. A test spot on a small area checks whether the film can adhere safely to the existing paint before a full wrap. This car is available as a hatchback or sedan, with lengths from 156.5 in (3,975 mm) to 165.9 in (4,215 mm). The tailgate with integrated glass means the film ends at the glass edge on both styles.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 39 ft (12 m) for the sedan to 46 ft (14 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).

Nissan Pulsar, third generation, factory photo
Factory color shown

1986–1990 Pulsar hatchback, sedan (third generation)

1986–1990hatchback, sedan (3 or 4 or 5 doors)158.7 in (4,030 mm) to 165.9 in (4,215 mm)

The third generation Pulsar from 1986–1990 is a compact hatchback or sedan with a length of 158.7 in (4,030 mm) to 165.9 in (4,215 mm), which influences the number of panels. A full wrap takes about 39 ft (12 m) of 60-inch cast film, or about 52 ft (16 m) for chrome or patterned film. The tailgate has the rear glass in it, so the film ends at the edge of the glass on the hatchback. This generation has simple body lines that make panel planning straightforward.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Nissan Pulsar, second generation, factory photo
Factory color shown

1982–1986 Pulsar convertible, coupe, hatchback, sedan (second generation)

1982–1986convertible, coupe, hatchback, sedan (2 or 3 or 4 or 5 doors)155.9 in (3,960 mm) to 156.3 in (3,970 mm)

The second generation Pulsar from 1982–1986 includes an open top body style, and the wrap treatment depends on the type of top. A fabric top is not wrapped, and the film ends where the fabric begins. A folding hard top is wrapped as separate panels of its own. The convertible needs about 43 ft (13 m) of 60-inch cast film, while the hatchback needs about 46 ft (14 m).

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 43 ft (13 m) for the convertible to 46 ft (14 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).

Nissan Pulsar, first generation, factory photo
Factory color shown

1978–1982 Pulsar coupe, hatchback, wagon (first generation)

1978–1982coupe, hatchback, wagon (2 or 3 or 5 doors)153.1 in (3,890 mm)

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 41 ft (12.5 m) for the coupe to 48 ft (14.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Pulsar

A partial wrap on a Pulsar can cover the roof, hood, or mirror caps without wrapping the whole car. Pulsar chrome delete covers window trim and badges with black film. Paint protection film (PPF) can be applied as clear film on the front end to protect against stone chips. These smaller jobs use less film than a full wrap and can be done on any generation.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Nissan Pulsar: body, cut-outs and film

The Nissan Pulsar vinyl wrap is planned around the car's compact size and its hatchback or sedan body style. The sixth generation is a five-door hatchback with a length of 172.7 in (4,387 mm), which sets a clear number of panels for a full wrap. Earlier generations vary from 155.9 in (3,960 mm) to 170.5 in (4,330 mm), so film amounts differ by generation. A hatchback tailgate with the rear glass in it means the film ends at the edge of the glass, not on the glass itself.

Pulsar wrap ideas often start with the parts that need cut-outs or come off for a clean installation. The tailgate with the rear glass in it requires the film to end at the edge of the glass on each generation. On the second generation convertible, the fabric top is not wrapped and the film ends where the top begins. If the convertible has a folding hard top, that top is wrapped as its own panels.

How much vinyl to wrap a Pulsar depends on the generation and its body style, and the figures change between generations. The sixth generation hatchback needs about 56 ft (17 m) of 60-inch cast film, while the fifth generation sedan needs about 41 ft (12.5 m) and that generation's hatchback about 48 ft (14.5 m). The fourth generation spans 39 ft (12 m) for the sedan to 46 ft (14 m) for the hatchback. The third generation uses about 39 ft (12 m), and the second generation ranges from 43 ft (13 m) for the convertible to 46 ft (14 m) for the hatchback.

Questions about wrapping a Nissan Pulsar

How much vinyl does it take to wrap a Nissan Pulsar?

It takes about 56 ft (17 m) of 60-inch (1.52 m) cast film to wrap a sixth generation Nissan Pulsar hatchback. This estimate is for the newest body from 2014–2018. Chrome or patterned film increases the amount to about 66 ft (20 m). Earlier generations need different amounts depending on their body style.

Can I wrap only the hood or the roof of a Pulsar?

Yes, you can wrap only the hood or the roof of a Pulsar. A partial wrap can cover the roof, hood, or mirror caps on any generation. These jobs use less film than a full wrap and are a good way to change the look without covering the whole car.

Is a Pulsar hard to wrap?

A Pulsar is not exceptionally hard to wrap, but some parts add work. The tailgate with the rear glass in it means the film must end at the edge of the glass on all hatchback models. On the second generation convertible, a fabric top is not wrapped and the film ends where the top begins. The compact size, ranging from 155.9 in (3,960 mm) to 172.7 in (4,387 mm), is manageable for an experienced installer.

How many generations of the Pulsar does this page cover?

This page covers six generations of the Nissan Pulsar, from the second generation produced 1982–1986 through the sixth generation produced 2014–2018.