Wraps by car

Nissan Quest wrap

The Nissan Quest wrap page covers all four generations of this minivan, from 1992 to 2017. A full vinyl wrap of the newest body takes about 77 ft (23.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film calls for about 90 ft (27.5 m) because of extra material for matching. The Quest is a five-door van in every generation except the first, which has four doors.

4generations23.5 mof film for a full wrap

Nissan Quest, fourth generation, factory photo
Nissan Quest, fourth generation. Factory color shown.

Nissan Quest wrap colors and ideas

  • Quest black wrap
  • Quest white wrap
  • Quest gray wrap
  • Quest silver wrap
  • Quest red wrap
  • Quest blue wrap
  • Quest green wrap
  • Quest yellow wrap
  • Quest orange wrap
  • Quest purple wrap
  • Quest pink wrap
  • Quest teal wrap
  • Quest brown wrap
  • Quest gold wrap
  • Quest chrome wrap
  • Quest color shift wrap
  • Quest carbon fiber wrap
  • Quest camo and patterned wrap

How much vinyl to wrap a Nissan Quest

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2010–2017van (5 doors)200.8 in (5,100 mm)about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 90 ft (27.5 m)
2003–2010van (5 doors)204.1 in (5,184 mm)about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 90 ft (27.5 m)
1998–2002van (5 doors)194.8 in (4,948 mm)about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m)
1992–1998van (4 doors)189.9 in (4,823 mm)about 72 ft (22 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m)

Quest wrap cost factors

Quest wrap cost is driven by the size of the van, the film type, and the labor for difficult areas. The fourth-generation body is 200.8 in (5,100 mm) long and has a roof that must be wrapped from a platform. A first-generation Quest is shorter at 189.9 in (4,823 mm), so it needs slightly less film and less time. The sliding door tracks on every generation require careful cutting, which adds to the labor.

  • Film for a full wrap: about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 90 ft (27.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (71.5 in (1,816 mm)): the roof is wrapped from a platform.

Quest wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan Quest, fourth generation, factory photo
Factory color shown

2010–2017 Quest van (fourth generation)

2010–2017van (5 doors)200.8 in (5,100 mm)

The fourth-generation Quest (2010–2017) has sliding side doors where the tracks stay bare and decide where the film is cut. The installer must leave the track area clear so the door slides correctly. Film is cut along the track line, and the edge is tucked or sealed. This body style is a five-door van with a length of 200.8 in (5,100 mm).

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (71.5 in (1,816 mm)): the roof is wrapped from a platform.

Film: about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 90 ft (27.5 m).

Nissan Quest, third generation, factory photo
Factory color shown

2003–2010 Quest van (third generation)

2003–2010van (5 doors)204.1 in (5,184 mm)

The third-generation Quest (2003–2010) has a tall body that requires wrapping the roof from a platform. At 70.0 in (1,778 mm) high, the roof is hard to reach from the ground. The extra height adds time and labor to a full wrap. The van is 204.1 in (5,184 mm) long, which is the longest of the four generations.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (70.0 in (1,778 mm)): the roof is wrapped from a platform.

Film: about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 90 ft (27.5 m).

Nissan Quest, second generation, factory photo
Factory color shown

1998–2002 Quest van (second generation)

1998–2002van (5 doors)194.8 in (4,948 mm)

The second-generation Quest (1998–2002) may have original or repainted panels, so a test spot comes before a full wrap. Paint age matters because older paint can lift when the film is removed. A small test spot on each panel tells the installer if the paint is sound. This van is 194.8 in (4,948 mm) long and still has the sliding side doors with bare tracks.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m).

Nissan Quest, first generation, factory photo
Factory color shown

1992–1998 Quest van (first generation)

1992–1998van (4 doors)189.9 in (4,823 mm)

The first-generation Quest (1992–1998) has a compact body that affects the amount of film and the number of panels. At 189.9 in (4,823 mm) long, it is the shortest Quest, so a full wrap uses about 72 ft (22 m) of film. The van has four doors rather than five, which means fewer door panels to cut and wrap. Its smaller size can reduce the total labor compared to later generations.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 72 ft (22 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).

Roof, hood, chrome delete and PPF on a Quest

Partial wrap options for the Nissan Quest include the roof, hood, and mirror caps. Quest chrome delete covers the window trim and badges with black film to change the brightwork. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs can be done without wrapping the entire van.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Nissan Quest: body, cut-outs and film

The Nissan Quest vinyl wrap changes with the body size and door layout of each generation. The fourth-generation van is 200.8 in (5,100 mm) long and has five doors, including two sliding side doors. The earlier first-generation model is shorter at 189.9 in (4,823 mm) and has four doors, so a wrap uses less film. A taller body means the roof wrap is done from a platform, which adds time to the job.

Quest wrap ideas need to account for the sliding door tracks, which stay bare and decide where the film is cut. The door tracks run along the side of the van and must remain clear for the doors to open. Cut-outs around the door handles and hinges are also part of the wrap. For a color change wrap, the film is trimmed along the track line so the doors slide without catching.

How much vinyl to wrap a Quest depends on the generation and the finish of the film. The fourth-generation van needs about 77 ft (23.5 m) of 60-inch (1.52 m) cast film for a full wrap. The first-generation model is smaller and needs about 72 ft (22 m) of the same film. Chrome or patterned film adds about 8 to 10 ft because of extra material for pattern matching.

Questions about wrapping a Nissan Quest

How much vinyl does it take to wrap a Nissan Quest?

It takes about 77 ft (23.5 m) of 60-inch (1.52 m) cast film to wrap a fourth-generation Nissan Quest fully. This figure is for the 2010–2017 body, the newest in the catalog. A chrome or patterned film wrap needs about 90 ft (27.5 m) because of extra material for matching. The first-generation model is smaller and needs about 72 ft (22 m).

Are the sliding doors of a Quest wrapped?

The sliding doors of a Quest are wrapped, but the door tracks stay bare. The film is cut along the track so the doors can open without rubbing. The track area is left unpainted or unwrapped to keep the mechanism clear. Wrapping the doors themselves is part of a full wrap, but the tracks are masked off.

Can I wrap only the hood or the roof of a Quest?

Yes, a partial wrap of the hood or the roof of a Quest is possible. Partial wrap jobs include the roof, hood, and mirror caps. A chrome delete covers window trim and badges, and paint protection film goes on the front end. These jobs use less film and less time than a full wrap.

Is a Quest hard to wrap?

A Quest is not particularly hard to wrap, but the tall body and sliding door tracks add work. The roof of the fourth-generation model is 71.5 in (1,816 mm) high, so a platform is needed. The sliding door tracks on every generation must stay bare, which means careful cutting along the track. The size of the van also means more square footage of film than a smaller car.