Wraps by car

Nissan R'nessa wrap

This page covers the Nissan R'nessa wrap in one generation produced from 1997 to 2001. The R'nessa is a five-door wagon with a tall body and a large tailgate. A full vinyl wrap on the newest body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 70 ft (21.5 m).

1generations19 mof film for a full wrap

Nissan R'nessa, first generation, factory photo
Nissan R'nessa, first generation. Factory color shown.

Nissan R'nessa wrap colors and ideas

  • R'nessa black wrap
  • R'nessa white wrap
  • R'nessa gray wrap
  • R'nessa silver wrap
  • R'nessa red wrap
  • R'nessa blue wrap
  • R'nessa green wrap
  • R'nessa yellow wrap
  • R'nessa orange wrap
  • R'nessa purple wrap
  • R'nessa pink wrap
  • R'nessa teal wrap
  • R'nessa brown wrap
  • R'nessa gold wrap
  • R'nessa chrome wrap
  • R'nessa color shift wrap
  • R'nessa carbon fiber wrap
  • R'nessa camo and patterned wrap

How much vinyl to wrap a Nissan R'nessa

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1997–2001wagon (5 doors)184.3 in (4,680 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

R'nessa wrap cost factors

The R'nessa wrap cost depends on the size of the body and the film you choose. A full wrap uses about 62 ft (19 m) of cast film, while chrome or patterned film takes about 70 ft (21.5 m). The tall roof must be wrapped from a platform, which adds labor time. The tailgate glass also requires careful cutting, so a full wrap costs more than a partial job.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: wagon (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (69.5 in (1,765 mm)): the roof is wrapped from a platform.

R'nessa wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan R'nessa, first generation, factory photo
Factory color shown

1997–2001 R'nessa wagon (first generation)

1997–2001wagon (5 doors)184.3 in (4,680 mm)

The first generation R'nessa has a body height of 69.5 in (1,765 mm), so the roof is best wrapped from a platform. This adds time to the job because the installer moves and works on a stable raised surface. The tall body is the main thing that changes how the wrap is done compared to a lower car.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (69.5 in (1,765 mm)): the roof is wrapped from a platform.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on an R'nessa

A partial wrap on the Nissan R'nessa can cover the roof, hood, or mirror caps alone. An R'nessa chrome delete covers the window trim and badges with black film. Paint protection film (PPF) can be applied as a clear film on the front end. These smaller jobs are good ways to change the look without a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Nissan R'nessa: body, cut-outs and film

The Nissan R'nessa vinyl wrap is worked around a wagon body that is 184.3 in (4,680 mm) long and 69.5 in (1,765 mm) tall. The tall body means the roof is wrapped from a platform, which adds time to the job. The five-door layout includes a tailgate with the rear glass in it, so the film ends at the edge of the glass. These sizes make the R'nessa a straightforward but larger wrap compared to a small hatchback.

R'nessa wrap ideas often start with the tailgate, since the glass is set into the metal and the film must be trimmed neatly around its edge. The roof is tall and is best wrapped from a platform for safe access. The tailgate does not need to come off, but the film is cut around the glass. Clean edges on the rear glass make a big difference to the finished look.

How much vinyl to wrap an R'nessa stays the same across production years because this page covers one generation from 1997 to 2001. A full wrap uses about 62 ft (19 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 70 ft (21.5 m). The tall roof is the main area that adds film compared to a lower wagon.

Questions about wrapping a Nissan R'nessa

How much vinyl does it take to wrap a Nissan R'nessa?

A full wrap on a Nissan R'nessa takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 70 ft (21.5 m). These figures are for the newest body, which is the only generation covered here.

Can I wrap only the hood or the roof of an R'nessa?

Yes, you can wrap only the hood or the roof of an R'nessa. A partial wrap can cover the roof, hood, or mirror caps. Chrome delete on the window trim and badges is also possible. Clear paint protection film on the front end is another partial option.

Is an R'nessa hard to wrap?

An R'nessa is not especially hard to wrap, but the tall body and tailgate add work. The roof is 69.5 in (1,765 mm) high, so it is wrapped from a platform. The tailgate has the rear glass in it, so the film ends at the edge of the glass. These parts take more time than flat panels.

How many generations of the R'nessa does this page cover?

This page covers one generation of the R'nessa, produced from 1997 to 2001. The single generation is a five-door wagon with a tall body. All wrap figures on this page are for that body.