Wraps by car

Nissan Stanza wrap

This page covers the Nissan Stanza wrap in vinyl wrap film across its three generations. The compact Stanza was built from 1981 through 1992 as a hatchback and sedan. A full wrap of the newest body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film.

3generations15.5 mof film for a full wrap

Nissan Stanza, third generation, factory photo
Nissan Stanza, third generation. Factory color shown.

Nissan Stanza wrap colors and ideas

  • Stanza black wrap
  • Stanza white wrap
  • Stanza gray wrap
  • Stanza silver wrap
  • Stanza red wrap
  • Stanza blue wrap
  • Stanza green wrap
  • Stanza yellow wrap
  • Stanza orange wrap
  • Stanza purple wrap
  • Stanza pink wrap
  • Stanza teal wrap
  • Stanza brown wrap
  • Stanza gold wrap
  • Stanza chrome wrap
  • Stanza color shift wrap
  • Stanza carbon fiber wrap
  • Stanza camo and patterned wrap

How much vinyl to wrap a Nissan Stanza

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1990–1992sedan (4 doors)179.9 in (4,570 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)
1986–1989sedan (4 doors)177.8 in (4,516 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)
1981–1985hatchback, sedan (4 or 5 doors)173.4 in (4,405 mm)about 49 ft (15 m) for the sedan to 51 ft (15.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m)

Stanza wrap cost factors

Stanza wrap cost depends on the film amount, panel count, and body style. The third generation sedan needs about 51 ft (15.5 m) of film, which is more than the first generation hatchback at about 49 ft (15 m). Chrome delete or patterned film adds material, up to about 62 ft (19 m). A two-tone wrap or extra cut-outs also raises the labor time.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: sedan (4 doors).

Stanza wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan Stanza, third generation, factory photo
Factory color shown

1990–1992 Stanza sedan (third generation)

1990–1992sedan (4 doors)179.9 in (4,570 mm)

The third generation Nissan Stanza from 1990 to 1992 is a four-door sedan. Paint age on a car of these years may be original or repainted, so a test spot comes before a full wrap. The film estimate is about 51 ft (15.5 m) of 60-inch (1.52 m) cast film, or about 62 ft (19 m) for chrome or patterned film. Its length of 179.9 in (4,570 mm) means a standard roll covers the body with little waste.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Nissan Stanza, second generation, factory photo
Factory color shown

1986–1989 Stanza sedan (second generation)

1986–1989sedan (4 doors)177.8 in (4,516 mm)

The second generation Stanza from 1986 to 1989 is a four-door sedan with T12 body code. Its length of 177.8 in (4,516 mm) means a full wrap uses about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. The four doors and trunk lid create more edges than a hatchback, so the number of panels stays the same as other sedans. Chrome or patterned film will need about 62 ft (19 m) due to pattern matching.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Nissan Stanza, first generation, factory photo
Factory color shown

1981–1985 Stanza hatchback, sedan (first generation)

1981–1985hatchback, sedan (4 or 5 doors)173.4 in (4,405 mm)

The first generation Stanza from 1981 to 1985 came as a hatchback and a sedan with four or five doors. The body style decides the panel plan and the film amount: the sedan takes about 49 ft (15 m) of film, while the hatchback takes about 51 ft (15.5 m). The hatchback has a tailgate with the rear glass in it, so the film ends at the edge of the glass. Its shorter length of 173.4 in (4,405 mm) still requires a full roll width of 60 inches (1.52 m).

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 49 ft (15 m) for the sedan to 51 ft (15.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Stanza

A partial wrap on a Stanza can cover the roof, hood, and mirror caps with color change film. Stanza chrome delete uses black film on the window trim and badges for a quieter look. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less material than a full wrap and still change the car's look.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Nissan Stanza: body, cut-outs and film

The Nissan Stanza vinyl wrap depends on body style and size. The third generation sedan measures 179.9 in (4,570 mm) long and has four doors. A shorter first generation hatchback takes about 49 ft (15 m) of film, while the sedan needs about 51 ft (15.5 m). These dimensions guide how much film you order.

Stanza wrap ideas start with knowing which parts need extra time. On the first generation hatchback, the tailgate has the rear glass in it, so the film ends at the edge of the glass. Door handles, mirrors, and trim usually come off for a clean edge. Cut-outs around badges and lights also add labor to the job.

How much vinyl to wrap a Stanza changes between generations. The 1990–1992 sedan requires about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. The 1981–1985 models use about 49 ft (15 m) for the sedan and up to 51 ft (15.5 m) for the hatchback. If you choose chrome or patterned film, the amount rises to about 62 ft (19 m).

Questions about wrapping a Nissan Stanza

How much vinyl does it take to wrap a Nissan Stanza?

A Nissan Stanza takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for a full wrap of the newest body. That figure is for the 1990–1992 sedan, which is 179.9 in (4,570 mm) long. If you use chrome or patterned film, plan for about 62 ft (19 m). The first generation hatchback uses slightly less, about 49 ft (15 m).

Can I wrap only the hood or the roof of a Stanza?

Yes, you can wrap only the hood or the roof of a Stanza. Those panels are part of a partial job that also includes mirror caps. A hood or roof wrap uses a single piece of film and is a way to test a color. It still requires cleaning and prep, but the film amount is far less than a full wrap.

Is a Stanza hard to wrap?

A Stanza is not especially hard to wrap, but a few things add work. On the first generation hatchback, the tailgate with the rear glass in it means the film must end at the edge of the glass. The compact size of about 173–180 inches (4.4–4.6 meters) is manageable, but the four doors and trunk lid on sedans create many edges. Plan for cut-outs around handles and badges on every generation.

How many generations of the Stanza does this page cover?

This page covers three generations of the Nissan Stanza. They are the first generation from 1981 to 1985, the second from 1986 to 1989, and the third from 1990 to 1992. The first generation offered hatchback and sedan styles, while the later two were sedans only. Film amounts vary slightly between them, from about 49 ft (15 m) to 51 ft (15.5 m).