Wraps by car

Nissan Tiida wrap

This page covers the Nissan Tiida vinyl wrap for two generations of the compact car. The first generation was produced from 2007 to 2014, and the second generation from 2015 to 2016. A full wrap of the newest body takes about 56 ft (17 m) of 60-inch (1.52 m) cast film.

2generations17 mof film for a full wrap

Nissan Tiida, second generation, factory photo
Nissan Tiida, second generation. Factory color shown.

Nissan Tiida wrap colors and ideas

  • Tiida black wrap
  • Tiida white wrap
  • Tiida gray wrap
  • Tiida silver wrap
  • Tiida red wrap
  • Tiida blue wrap
  • Tiida green wrap
  • Tiida yellow wrap
  • Tiida orange wrap
  • Tiida purple wrap
  • Tiida pink wrap
  • Tiida teal wrap
  • Tiida brown wrap
  • Tiida gold wrap
  • Tiida chrome wrap
  • Tiida color shift wrap
  • Tiida carbon fiber wrap
  • Tiida camo and patterned wrap

How much vinyl to wrap a Nissan Tiida

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2015–2016hatchback (5 doors)172.7 in (4,387 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)
2007–2014hatchback, sedan (4 or 5 doors)165.6 in (4,205 mm) to 176.1 in (4,474 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Tiida wrap cost factors

Tiida wrap cost depends on the film type, the body style, and the amount of labor. The first generation sedan is longer than the hatchback, so it may need slightly more film. The second generation is a single hatchback body, which simplifies material estimation. The choice between standard cast film and chrome or patterned film also changes the material cost.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Tiida wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan Tiida, second generation, factory photo
Factory color shown

2015–2016 Tiida hatchback (second generation)

2015–2016hatchback (5 doors)172.7 in (4,387 mm)

The second generation Tiida is a five-door hatchback produced from 2015 to 2016. Its length of 172.7 in (4,387 mm) and hatchback shape mean fewer panels than a sedan. The wrap uses about 56 ft (17 m) of 60-inch cast film, or about 66 ft (20 m) for chrome or patterned film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Nissan Tiida, first generation, factory photo
Factory color shown

2007–2014 Tiida hatchback, sedan (first generation)

2007–2014hatchback, sedan (4 or 5 doors)165.6 in (4,205 mm) to 176.1 in (4,474 mm)

On a first generation Tiida from 2007 to 2014, paint age matters before a full wrap. Some panels may be original while others have been repainted, and a test spot checks adhesion. The car came as a hatchback or sedan with four or five doors, and lengths vary from 165.6 in (4,205 mm) to 176.1 in (4,474 mm).

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Tiida

A partial wrap on a Tiida can cover the roof, hood, or mirror caps. A chrome delete covers window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Nissan Tiida: body, cut-outs and film

The Nissan Tiida vinyl wrap depends on the body style and size of the car. The first generation came as a hatchback or sedan with four or five doors, while the second generation is a five-door hatchback. The second generation measures 172.7 in (4,387 mm) long, and the first generation ranges from 165.6 in (4,205 mm) to 176.1 in (4,474 mm). These dimensions affect the amount of film needed and the number of panels to cover.

Some parts of the Tiida need cut-outs or come off for a clean wrap. The tailgate has the rear glass in it, so the film ends at the edge of the glass. Some trims have cameras in the body, and the film is cut around each lens. Some trims have fog lamps in the front bumper, requiring cut-outs in the bumper film.

How much vinyl to wrap a Tiida changes between the generations. The first generation (C11) uses about 54 ft (16.5 m) of 60-inch (1.52 m) cast film, while the second generation (C13) uses about 56 ft (17 m). Chrome or patterned film adds to the amount: about 64 ft (19.5 m) for the first generation and about 66 ft (20 m) for the second.

Questions about wrapping a Nissan Tiida

How much vinyl does it take to wrap a Nissan Tiida?

A full wrap of the newest Nissan Tiida takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. This estimate covers the second generation hatchback body. For chrome or patterned film, plan for about 66 ft (20 m).

Can I wrap only the hood or the roof of a Tiida?

Yes, you can wrap only the hood or the roof of a Tiida. Partial wrap jobs often include the roof, hood, and mirror caps. A chrome delete for window trim and badges is another option. Paint protection film (PPF) can be applied to the front end as a clear layer.

Is a Tiida hard to wrap?

A Tiida is not the hardest car to wrap, but a few things add work. The tailgate has the rear glass in it, so the film must end at the edge of the glass. Some trims have cameras in the body and fog lamps in the front bumper, requiring careful cut-outs. The compact size keeps the total area manageable.

How many generations of the Tiida does this page cover?

This page covers two generations of the Nissan Tiida. The first generation was produced from 2007 to 2014, and the second generation from 2015 to 2016.