Wraps by car

Nissan Xterra wrap

A Nissan Xterra wrap covers the whole body of this two-generation SUV. The catalog includes the first generation from 1999 to 2005 and the second generation from 2005 to 2015. A full wrap of the 2005–2015 body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. This vinyl wrap changes the color or finish of the Xterra in one piece of work.

2generations18.5 mof film for a full wrap

Nissan Xterra, second generation, factory photo
Nissan Xterra, second generation. Factory color shown.

Nissan Xterra wrap colors and ideas

  • Xterra black wrap
  • Xterra white wrap
  • Xterra gray wrap
  • Xterra silver wrap
  • Xterra red wrap
  • Xterra blue wrap
  • Xterra green wrap
  • Xterra yellow wrap
  • Xterra orange wrap
  • Xterra purple wrap
  • Xterra pink wrap
  • Xterra teal wrap
  • Xterra brown wrap
  • Xterra gold wrap
  • Xterra chrome wrap
  • Xterra color shift wrap
  • Xterra carbon fiber wrap
  • Xterra camo and patterned wrap

How much vinyl to wrap a Nissan Xterra

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2005–2015SUV (5 doors)178.7 in (4,539 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m)
1999–2005SUV (5 doors)178.0 in (4,522 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)

Xterra wrap cost factors

Xterra wrap cost depends on the size of the vehicle and the film you choose. The Xterra is a mid-size SUV, 178.7 in (4,539 mm) long in the second generation. A full wrap uses about 61 ft (18.5 m) of 60-inch (1.52 m) cast film, or more if you pick a chrome or patterned film. The amount of prep work on a given car also changes the final price.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (74.9 in (1,902 mm)): the roof is wrapped from a platform.
  • Restyled in 2009: bumpers and lights differ between the versions, and so do the film cuts.

Xterra wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan Xterra, second generation, factory photo
Factory color shown

2005–2015 Xterra SUV (second generation)

2005–2015SUV (5 doors)178.7 in (4,539 mm)

The 2009 restyling of the second generation Xterra changed the bumpers and lights. Film cut for a 2005–2008 Xterra does not fit a 2009–2015 Xterra at the front and rear ends. A shop that wraps this generation keeps separate patterns for the two versions. The rest of the body panels stay the same shape.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (74.9 in (1,902 mm)): the roof is wrapped from a platform.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).

Nissan Xterra, first generation, factory photo
Factory color shown

1999–2005 Xterra SUV (first generation)

1999–2005SUV (5 doors)178.0 in (4,522 mm)

Paint age is a real factor on a first generation Xterra from 1999 to 2005. Some panels may be original paint and some may be repainted after years of use. A test spot of film on each panel comes before a full wrap. That step shows whether the paint is sound enough for the vinyl to lay flat.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (69.4 in (1,763 mm)): the roof is wrapped from a platform.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a Xterra

A partial wrap on a Nissan Xterra covers the roof, hood or mirror caps, not the whole SUV. Xterra chrome delete covers the window trim and badges with black film to remove the bright trim. Paint protection film (PPF) is clear film on the front end of the Xterra to guard against stone chips. These jobs use less film and take less time than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Nissan Xterra: body, cut-outs and film

The Nissan Xterra vinyl wrap works with one body style across both generations, a five-door SUV. The second generation is 178.7 in (4,539 mm) long and the first generation is 178.0 in (4,522 mm) long. The difference in size between the two is small, so film estimates stay almost the same. A boxy shape and flat side panels make the Xterra a direct vehicle to wrap.

Xterra wrap ideas have to allow for a tailgate with the rear glass in it. The film ends at the edge of the glass on the tailgate. The roof is tall, 74.9 in (1,902 mm) on the second generation, so the installer wraps it from a platform. The rear bumper, door handles and mirrors are cut out or removed for a clean install.

How much vinyl to wrap a Xterra depends on the generation you own. A full wrap of the 2005–2015 Xterra takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. The 1999–2005 Xterra takes the same amount of standard film, about 61 ft (18.5 m). If you choose chrome or patterned film, the 2005–2015 body needs about 77 ft (23.5 m) and the 1999–2005 body needs about 76 ft (23 m).

Questions about wrapping a Nissan Xterra

How much vinyl does it take to wrap a Nissan Xterra?

It takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film to wrap a Nissan Xterra. That figure is for a full wrap of the second generation Xterra, the 2005–2015 body. A chrome or patterned film takes more, about 77 ft (23.5 m). The first generation Xterra needs about the same amount of standard film.

Which years of the Xterra take the same film cuts?

The years 2005–2008 and 2009–2015 take the same film cuts within the second generation Xterra, but not across the 2009 restyling. The second generation was built from 2005 to 2015 and restyled in 2009. The first generation Xterra, 1999–2005, is a different body with its own cuts. For the first generation, the 2001 restyling changed some trim but the same film cuts still work for 1999–2005.

Can I wrap only the hood or the roof of a Xterra?

Yes, you can wrap only the hood or the roof of a Xterra. A partial wrap covers one of those panels or the mirror caps, not the whole SUV. The roof of a Xterra is tall, so the installer needs a platform to reach it. A partial wrap uses less film than a full wrap.

Is a Xterra hard to wrap?

A Xterra is not hard to wrap, but two parts of the job add work. The tailgate has the rear glass in it, so the film ends at the edge of the glass. The roof is tall, 74.9 in (1,902 mm) on the second generation, so it is wrapped from a platform. The boxy shape of the body makes the side panels straightforward.