Wraps by car

Porsche 718 Cayman GT4 wrap

The Porsche 718 Cayman GT4 wrap page covers the first and second generations of this two-door sports car. A full vinyl wrap of the newest body uses about 49 ft (15 m) of 60-inch (1.52 m) cast film. The first generation dates from 2015 to 2017, and the second generation runs from 2019 to the present.

2generations15 mof film for a full wrap

Porsche 718 Cayman GT4, second generation, factory photo
Porsche 718 Cayman GT4, second generation. Factory color shown.

Porsche 718 Cayman GT4 wrap colors and ideas

  • Porsche 718 Cayman GT4 black wrap
  • Porsche 718 Cayman GT4 white wrap
  • Porsche 718 Cayman GT4 gray wrap
  • Porsche 718 Cayman GT4 silver wrap
  • Porsche 718 Cayman GT4 red wrap
  • Porsche 718 Cayman GT4 blue wrap
  • Porsche 718 Cayman GT4 green wrap
  • Porsche 718 Cayman GT4 yellow wrap
  • Porsche 718 Cayman GT4 orange wrap
  • Porsche 718 Cayman GT4 purple wrap
  • Porsche 718 Cayman GT4 pink wrap
  • Porsche 718 Cayman GT4 teal wrap
  • Porsche 718 Cayman GT4 brown wrap
  • Porsche 718 Cayman GT4 gold wrap
  • Porsche 718 Cayman GT4 chrome wrap
  • Porsche 718 Cayman GT4 color shift wrap
  • Porsche 718 Cayman GT4 carbon fiber wrap
  • Porsche 718 Cayman GT4 camo and patterned wrap

How much vinyl to wrap a Porsche 718 Cayman GT4

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2019–nowcoupe (2 doors)175.4 in (4,456 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)
2015–2017coupe (2 doors)174.7 in (4,438 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Porsche 718 Cayman GT4 wrap cost factors

The Porsche 718 Cayman GT4 wrap cost depends on the film width, the number of cut-outs, and the condition of the paint. The 60-inch (1.52 m) film reduces the number of seams on the doors and bumpers. Cut-outs for parking sensors and cameras add labor on every trim of the second generation. Curved panels like the rear wing and the side intakes take more time than flat sections.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.

Porsche 718 Cayman GT4 wraps by generation

Swipe sideways. Tap a card for the full description.

Porsche 718 Cayman GT4, second generation, factory photo
Factory color shown

2019–now Porsche 718 Cayman GT4 coupe (second generation)

2019–nowcoupe (2 doors)175.4 in (4,456 mm)

The second generation Porsche 718 Cayman GT4 is 175.4 in (4,456 mm) long and uses about 49 ft (15 m) of 60-inch (1.52 m) film for a full wrap. Its coupe body has two long side doors, each wrapped as one large piece. The fixed roof and short tail keep the panel count low, but the deep front bumper needs careful inlays. Installers cut the film around parking sensors and cameras on every trim.

Two long side doors: each door is one large piece of film.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Porsche 718 Cayman GT4, first generation, factory photo
Factory color shown

2015–2017 Porsche 718 Cayman GT4 coupe (first generation)

2015–2017coupe (2 doors)174.7 in (4,438 mm)

The first generation Porsche 718 Cayman GT4 is 174.7 in (4,438 mm) long and uses about 49 ft (15 m) of 60-inch (1.52 m) film for a full wrap. Its two long side doors are each wrapped as one large piece, just like the newer car. The coupe body has no quarter windows behind the doors, so the rear haunches are one continuous sweep. No parking sensors or cameras are listed for this generation, so the bumpers need fewer cut-outs.

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Porsche 718 Cayman GT4

A partial wrap of a Porsche 718 Cayman GT4 can cover the roof, hood, or mirror caps. A chrome delete on this car covers the window trim and badges with black film. Paint protection film (PPF) as a clear film on the front end guards the bumper, hood, and fenders from stone chips. These smaller jobs use less film than a full wrap but still need the same care around the coupe's edges.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Porsche 718 Cayman GT4: body, cut-outs and film

A Porsche 718 Cayman GT4 vinyl wrap has to follow the coupe's compact 175.4 in (4,456 mm) length and tightly curved panels. The two long side doors are each wrapped as one large piece of film, which keeps the sides clean but asks for careful stretching. The short overhangs and deep bumper shapes mean the installer spends extra time on the lower sections. Because the car is a coupe with a fixed roof, the roof panel itself is a single, manageable piece.

Porsche 718 Cayman GT4 wrap ideas often start with the parts that need cut-outs or removal. Every trim of the second generation has parking sensors in the bumpers, and the film is cut around each sensor. Cameras in the body also need the film cut around each lens. Owners who want a color change wrap usually leave the door handles on, but badges and mirror caps come off for a neater edge.

How much vinyl to wrap a Porsche 718 Cayman GT4 depends on the generation only in the sheet length and width. The first generation is 174.7 in (4,438 mm) long, which is just 0.7 in (18 mm) shorter than the second generation. Both generations are coupes with two doors, so the number of panels does not change. The film estimate is about 49 ft (15 m) of 60-inch (1.52 m) cast film for either generation.

Questions about wrapping a Porsche 718 Cayman GT4

How much vinyl does it take to wrap a Porsche 718 Cayman GT4?

A Porsche 718 Cayman GT4 takes about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full wrap. The first and second generations share this film estimate despite a small difference in length. If you choose a chrome or patterned film, plan for about 56 ft (17 m) to allow for pattern matching.

Can I wrap only the hood or the roof of a Porsche 718 Cayman GT4?

Yes, you can wrap only the hood or the roof of a Porsche 718 Cayman GT4. The partial wrap options also include mirror caps and chrome delete for the window trim and badges. Paint protection film on the front end covers the hood and bumper in clear film.

Is a Porsche 718 Cayman GT4 hard to wrap?

A Porsche 718 Cayman GT4 is moderately hard to wrap because of its short overhangs and curved bumper shapes. Every trim of the second generation has parking sensors and cameras, so the film must be cut around each sensor and lens. The two long side doors are each done as one large piece, which needs careful handling but gives a clean look.

How many generations of the Porsche 718 Cayman GT4 does this page cover?

This page covers two generations of the Porsche 718 Cayman GT4. The first generation spans 2015 to 2017, and the second generation runs from 2019 to the present. Both are two-door coupes with nearly the same length.