Wraps by car

Porsche 918 Spyder wrap

A Porsche 918 Spyder wrap covers the first-generation convertible built from 2010 to 2015 in vinyl wrap. Porsche lists one generation of the 918 Spyder in this catalog. A full wrap of the newest body takes about 43 ft (13 m) of 60-inch (1.52 m) cast film.

1generations13 mof film for a full wrap

Porsche 918 Spyder, first generation, factory photo
Porsche 918 Spyder, first generation. Factory color shown.

Porsche 918 Spyder wrap colors and ideas

  • Porsche 918 Spyder black wrap
  • Porsche 918 Spyder white wrap
  • Porsche 918 Spyder gray wrap
  • Porsche 918 Spyder silver wrap
  • Porsche 918 Spyder red wrap
  • Porsche 918 Spyder blue wrap
  • Porsche 918 Spyder green wrap
  • Porsche 918 Spyder yellow wrap
  • Porsche 918 Spyder orange wrap
  • Porsche 918 Spyder purple wrap
  • Porsche 918 Spyder pink wrap
  • Porsche 918 Spyder teal wrap
  • Porsche 918 Spyder brown wrap
  • Porsche 918 Spyder gold wrap
  • Porsche 918 Spyder chrome wrap
  • Porsche 918 Spyder color shift wrap
  • Porsche 918 Spyder carbon fiber wrap
  • Porsche 918 Spyder camo and patterned wrap

How much vinyl to wrap a Porsche 918 Spyder

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2010–2015convertible (2 doors)182.8 in (4,643 mm)about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m)

Porsche 918 Spyder wrap cost factors

Porsche 918 Spyder wrap cost depends on film choice, body condition, and the amount of film the car needs. A full wrap takes about 43 ft (13 m) of 60-inch (1.52 m) cast film, while chrome or patterned film takes about 51 ft (15.5 m). The convertible body and camera cut-outs also influence the labor a shop must plan.

  • Film for a full wrap: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Every trim has cameras in the body: the film is cut around each lens.

Porsche 918 Spyder wraps by generation

Swipe sideways. Tap a card for the full description.

Porsche 918 Spyder, first generation, factory photo
Factory color shown

2010–2015 Porsche 918 Spyder convertible (first generation)

2010–2015convertible (2 doors)182.8 in (4,643 mm)

The open top of the Porsche 918 Spyder is a fabric panel that is not wrapped. The vinyl film ends where the fabric begins, leaving the top in its original color. Every trim has cameras in the body, and the film is cut around each lens.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Every trim has cameras in the body: the film is cut around each lens.

Film: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).

Roof, hood, chrome delete and PPF on a Porsche 918 Spyder

A partial wrap on a Porsche 918 Spyder covers the hood, mirror caps, or rear deck. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Porsche 918 Spyder: body, cut-outs and film

The Porsche 918 Spyder vinyl wrap starts with a two-door convertible body that is 182.8 in (4,643 mm) long. The single body style means one wrap design fits every car from these years. A full color change wrap therefore uses the same film estimate for the whole production run.

Porsche 918 Spyder wrap ideas must account for the convertible top and the cameras in the body. A fabric top is not wrapped, and the film ends where the top begins. Every trim has cameras in the body, so the film is cut around each lens.

How much vinyl to wrap a Porsche 918 Spyder depends on the single generation in the catalog. The first generation, built from 2010 to 2015, has consistent body dimensions and panel shapes across those years. Installers count the same film for any 918 Spyder from this range.

Questions about wrapping a Porsche 918 Spyder

How much vinyl does it take to wrap a Porsche 918 Spyder?

A Porsche 918 Spyder takes about 43 ft (13 m) of 60-inch (1.52 m) cast film for a full wrap. Chrome or patterned film takes about 51 ft (15.5 m). The estimate applies to the single first-generation body built from 2010 to 2015.

Is the top of a Porsche 918 Spyder wrapped?

No, the top of a Porsche 918 Spyder is not wrapped. The 918 Spyder has a fabric convertible top, and vinyl film ends where the fabric begins.

Can I wrap only the hood or the roof of a Porsche 918 Spyder?

Yes, you can wrap only the hood or the rear deck of a Porsche 918 Spyder. The roof is not wrapped because the top is fabric. A partial wrap covers the hood, mirror caps, or rear deck.

Is a Porsche 918 Spyder hard to wrap?

Yes, a Porsche 918 Spyder adds work because of the convertible top and the cameras in the body. The fabric top is not wrapped, so the film ends cleanly where it begins. Every trim has cameras in the body, and the film is cut around each lens.