Wraps by car

Porsche 911 S/T wrap

The Porsche 911 S/T wrap page covers this special sports car in detail. One generation is listed for the 911 S/T, produced from 2023 to now. A full vinyl wrap of the newest coupe body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, plan for about 56 ft (17 m).

1generations15.5 mof film for a full wrap

Porsche 911 S/T, first generation, factory photo
Porsche 911 S/T, first generation. Factory color shown.

Porsche 911 S/T wrap colors and ideas

  • 911 S/T black wrap
  • 911 S/T white wrap
  • 911 S/T gray wrap
  • 911 S/T silver wrap
  • 911 S/T red wrap
  • 911 S/T blue wrap
  • 911 S/T green wrap
  • 911 S/T yellow wrap
  • 911 S/T orange wrap
  • 911 S/T purple wrap
  • 911 S/T pink wrap
  • 911 S/T teal wrap
  • 911 S/T brown wrap
  • 911 S/T gold wrap
  • 911 S/T chrome wrap
  • 911 S/T color shift wrap
  • 911 S/T carbon fiber wrap
  • 911 S/T camo and patterned wrap

How much vinyl to wrap a Porsche 911 S/T

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2023–nowcoupe (2 doors)180.0 in (4,573 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

911 S/T wrap cost factors

911 S/T wrap cost depends on film choice, coverage, and the car's dimensions. The full body needs about 51 ft (15.5 m) of 60-inch cast film, or 56 ft (17 m) for chrome or patterned film. The coupe body has two long doors that require large single pieces. The installer's time for clean edges and recessed areas also influences the final figure.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

911 S/T wraps by generation

Swipe sideways. Tap a card for the full description.

Porsche 911 S/T, first generation, factory photo
Factory color shown

2023–now 911 S/T coupe (first generation)

2023–nowcoupe (2 doors)180.0 in (4,573 mm)

The first generation Porsche 911 S/T sets the film amount for every wrap estimate. The coupe body is 180.0 in (4,573 mm) long, which keeps the wrap area compact. A full vinyl wrap needs about 51 ft (15.5 m) of 60-inch film. Because the doors are long, each side panel uses a single large piece of film.

Two long side doors: each door is one large piece of film.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a 911 S/T

A partial wrap on the 911 S/T can cover the roof, hood, or mirror caps. Chrome delete covers window trim and badges with black film for a darker look. Paint protection film (PPF), a clear film on the front end, guards against stone chips. Each of these jobs uses less film than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Porsche 911 S/T: body, cut-outs and film

A Porsche 911 S/T vinyl wrap starts with its compact coupe body. The car is 180.0 in (4,573 mm) long, which keeps panel sizes manageable. Two long side doors each take one large piece of film. The smooth roofline of the coupe reduces the number of separate panels.

911 S/T wrap ideas often focus on clean, uninterrupted side panels. The two long side doors are each covered with one large piece of film. This design simplifies installation and reduces visible seams. The front and rear bumpers need careful stretching around the intakes and light openings.

To know how much vinyl to wrap a 911 S/T, check the body details of the single generation. The 2023 to now coupe has a consistent shape, so film estimates stay stable. The 180.0 in (4,573 mm) overall length and long doors drive the material count. A full wrap uses about 51 ft (15.5 m) of standard cast film.

Questions about wrapping a Porsche 911 S/T

How much vinyl does it take to wrap a Porsche 911 S/T?

It takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast vinyl to wrap a Porsche 911 S/T. For chrome or patterned film, the estimate rises to about 56 ft (17 m). These figures cover the coupe body of the 2023 to now generation. The long side doors and smooth panels allow efficient use of the film.

Can I wrap only the hood or the roof of a 911 S/T?

Yes, you can wrap only the hood or the roof of a 911 S/T. A partial wrap on those panels is a smaller job than a full color change wrap. Mirror caps are another option for a quick accent. The hood is a single curved panel that takes one piece of film.

Is a 911 S/T hard to wrap?

A 911 S/T is not the easiest car to wrap, but it is manageable for an experienced installer. The long side doors each need one large piece of film, which can be difficult to handle. The compact 180.0 in (4,573 mm) body has tight curves around the bumpers. The rear intakes and the trailing edge of the doors require careful cutting and tucking.

How many generations of the 911 S/T does this page cover?

This page covers one generation of the 911 S/T. The listed generation is the 2023 to now coupe. All wrap data on this page refers to that single body style. No earlier generations exist for the S/T nameplate.