Wraps by car

Porsche 718 Spyder wrap

A Porsche 718 Spyder wrap covers the convertible body of the 982-code sports car with vinyl film. The model has one generation in the catalog, produced from 2019 to the present. A full wrap of the newest body takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film.

1generations12.5 mof film for a full wrap

Porsche 718 Spyder, first generation, factory photo
Porsche 718 Spyder, first generation. Factory color shown.

Porsche 718 Spyder wrap colors and ideas

  • Porsche 718 Spyder black wrap
  • Porsche 718 Spyder white wrap
  • Porsche 718 Spyder gray wrap
  • Porsche 718 Spyder silver wrap
  • Porsche 718 Spyder red wrap
  • Porsche 718 Spyder blue wrap
  • Porsche 718 Spyder green wrap
  • Porsche 718 Spyder yellow wrap
  • Porsche 718 Spyder orange wrap
  • Porsche 718 Spyder purple wrap
  • Porsche 718 Spyder pink wrap
  • Porsche 718 Spyder teal wrap
  • Porsche 718 Spyder brown wrap
  • Porsche 718 Spyder gold wrap
  • Porsche 718 Spyder chrome wrap
  • Porsche 718 Spyder color shift wrap
  • Porsche 718 Spyder carbon fiber wrap
  • Porsche 718 Spyder camo and patterned wrap

How much vinyl to wrap a Porsche 718 Spyder

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2019–nowconvertible (2 doors)174.4 in (4,430 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)

Porsche 718 Spyder wrap cost factors

A Porsche 718 Spyder wrap cost depends on film type, labor time, and the condition of the paint. The car needs about 41 ft (12.5 m) of 60-inch (1.52 m) film, so material quantity is fixed. A chrome or patterned film raises waste and alignment time, demanding 52 ft (16 m). The convertible top and sensors in the bumpers add labor for precise trimming.

  • Film for a full wrap: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.

Porsche 718 Spyder wraps by generation

Swipe sideways. Tap a card for the full description.

Porsche 718 Spyder, first generation, factory photo
Factory color shown

2019–now Porsche 718 Spyder convertible (first generation)

2019–nowconvertible (2 doors)174.4 in (4,430 mm)

For the open top of the Porsche 718 Spyder, the fabric roof is never wrapped. The film ends where the top begins, at the beltline and windshield header. No film is applied to the folding mechanism or the rear window. The deck lid behind the seats is wrapped as a separate panel, with seams hidden at the edges.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Roof, hood, chrome delete and PPF on a Porsche 718 Spyder

Smaller jobs on a Porsche 718 Spyder include a partial wrap of the hood, mirror caps, and rear deck. A chrome delete covers window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end for impact protection. Each option avoids wrapping the fabric top.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Porsche 718 Spyder: body, cut-outs and film

The Porsche 718 Spyder vinyl wrap fits one body style: a two-door convertible. Its length of 174.4 in (4,430 mm) sets the scale for panel coverage. The fabric top is not wrapped, so the film ends where the top begins. This leaves the lower body, doors, fenders, and bumpers as the main wrap surfaces.

Porsche 718 Spyder wrap ideas must account for cut-outs around parking sensors in the bumpers. Every trim has sensors, so the film is cut around each sensor. Cameras in the body also require careful trimming around each lens. Installers remove badges, mirrors, and door handles for a clean edge.

When counting how much vinyl to wrap a Porsche 718 Spyder, only one generation exists. Buyers measure film for the 982 body from 2019 onward. The estimate stays at about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 52 ft (16 m) because matching patterns wastes material.

Questions about wrapping a Porsche 718 Spyder

How much vinyl does it take to wrap a Porsche 718 Spyder?

A Porsche 718 Spyder takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film for a full wrap. This figure comes from the film estimate of the newest body, the 982. For chrome or patterned film, plan on about 52 ft (16 m).

Is the top of a Porsche 718 Spyder wrapped?

No, the fabric top of a Porsche 718 Spyder is not wrapped. The film ends where the top begins, at the beltline and windshield header. Only the painted body panels receive vinyl.

Can I wrap only the hood or the roof of a Porsche 718 Spyder?

Yes, you can wrap only the hood or the rear deck of a Porsche 718 Spyder. A partial wrap typically includes the hood, mirror caps, and rear deck. The roof is fabric and cannot be wrapped, but the deck lid behind the seats can be covered.

Is a Porsche 718 Spyder hard to wrap?

A Porsche 718 Spyder is moderately difficult to wrap because of its convertible top and body sensors. The fabric top must be masked off where film ends. Parking sensors in the bumpers and cameras in the body require individual cut-outs. The 174.4 in (4,430 mm) length is standard for a sports car, but the curved rear haunches demand careful stretching.