Wraps by car

Porsche 928 wrap

A Porsche 928 wrap changes the look of this front-engine Porsche sports car with a single vinyl wrap installation. The catalog includes one generation of the Porsche 928, produced from 1977 to 1995. The newest body takes about 46 ft (14 m) of 60-inch (1.52 m) cast film for a full wrap, or about 52 ft (16 m) if the film has chrome or a pattern.

1generations14 mof film for a full wrap

Porsche 928, first generation, factory photo
Porsche 928, first generation. Factory color shown.

Porsche 928 wrap colors and ideas

  • Porsche 928 black wrap
  • Porsche 928 white wrap
  • Porsche 928 gray wrap
  • Porsche 928 silver wrap
  • Porsche 928 red wrap
  • Porsche 928 blue wrap
  • Porsche 928 green wrap
  • Porsche 928 yellow wrap
  • Porsche 928 orange wrap
  • Porsche 928 purple wrap
  • Porsche 928 pink wrap
  • Porsche 928 teal wrap
  • Porsche 928 brown wrap
  • Porsche 928 gold wrap
  • Porsche 928 chrome wrap
  • Porsche 928 color shift wrap
  • Porsche 928 carbon fiber wrap
  • Porsche 928 camo and patterned wrap

How much vinyl to wrap a Porsche 928

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1977–1995coupe (2 doors)167.3 in (4,250 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)

Porsche 928 wrap cost factors

Porsche 928 wrap cost depends on the size of the car, the body style and the condition of the paint. The Porsche 928 is a coupe with a length of 167.3 in (4,250 mm), which sets the amount of film the installer must order. The cost is also set by the film: cast vinyl is one option, and chrome or patterned film needs more material per square foot. A full color change wrap uses about 46 ft (14 m) of film, and paint protection film on the front end is a smaller job.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Porsche 928 wraps by generation

Swipe sideways. Tap a card for the full description.

Porsche 928, first generation, factory photo
Factory color shown

1977–1995 Porsche 928 coupe (first generation)

1977–1995coupe (2 doors)167.3 in (4,250 mm)

Porsche 928 paint age matters on a car from 1977 to 1995, because the panels may be original or repainted. A test spot before a full wrap shows whether the paint will release cleanly when the film is removed. The first generation Porsche 928 is the only body this page covers, and its coupe shape has not changed through the years. For a car this age, budget extra time to clean the paint and repair any chips before the vinyl goes on.

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Roof, hood, chrome delete and PPF on a Porsche 928

A Porsche 928 chrome delete covers the window trim and badges with black film, and a partial wrap can be just the roof, hood or mirror caps. Paint protection film (PPF) on the front end is a clear option that guards the nose and the leading edge of the hood. These smaller jobs use less film than a full wrap and can be done in stages. The chrome delete is a good first step on a car of this era because the trim is narrow and easy to mask.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Porsche 928: body, cut-outs and film

A Porsche 928 vinyl wrap follows a coupe body that is 167.3 in (4,250 mm) long with two doors. The single body style keeps the wrap plan straightforward, and the length is close to modern sports cars you may have wrapped before. The film estimate for this car counts on using 60-inch (1.52 m) rolls, the usual width for cast wrap film. The side panels are long, so you will order less waste when you plan each piece before cutting.

Porsche 928 wrap ideas start with the two long side doors, because each door is one large piece of film. The door shape is simple, but the size means you need a second pair of hands to lay the vinyl without creasing. The front and rear bumpers wrap as separate panels, and the mirrors may be easier to wrap off the car. The window trim is thin, and a chrome delete looks cleaner when the film is cut after it is laid.

How much vinyl to wrap a Porsche 928 depends on the film width, and the estimate for a full wrap is about 46 ft (14 m) of 60-inch (1.52 m) cast film. Buy about 52 ft (16 m) when the film has chrome or a pattern that must line up. There is only one generation in the catalog, so the amount of film does not change between the model years of the Porsche 928. Extra film is useful for the door jambs if the owner wants the color change to be complete.

Questions about wrapping a Porsche 928

How much vinyl does it take to wrap a Porsche 928?

It takes about 46 ft (14 m) of 60-inch (1.52 m) cast film to wrap a Porsche 928. This figure is for the newest body style in the catalog, the first generation coupe. If the film has chrome or a pattern, order about 52 ft (16 m) because the pattern must be matched at the seams. The length of the Porsche 928 is 167.3 in (4,250 mm), which is why a full wrap uses this much material.

Can I wrap only the hood or the roof of a Porsche 928?

Yes, you can wrap only the hood or the roof of a Porsche 928, and the mirror caps are another small job. These partial wrap options use less film than a full color change. A chrome delete on the window trim and badges is also a common smaller project on this car. Paint protection film on the front end is a clear way to protect the hood and bumper without changing the color.

Is a Porsche 928 hard to wrap?

The Porsche 928 is not hard to wrap, but two long side doors add work because each door is one large piece of film. The car is 167.3 in (4,250 mm) long, so you need a clean, flat area to lay out the vinyl. The coupe body has simple curves, but the door size means you should have a second person to help with the panels. The film estimate of about 46 ft (14 m) gives you enough material to redo a panel if the first attempt fails.

How many generations of the Porsche 928 does this page cover?

This page covers one generation of the Porsche 928, the first generation from 1977 to 1995. The catalog includes this single generation because the body style stayed the same: a two-door coupe. All the film estimates and wrap notes on this page apply to that one generation. There are no other generations of the Porsche 928 in the catalog.