Wraps by car

Porsche 911 GT3 RS wrap

The Porsche 911 GT3 RS wrap page covers this high-performance sports car, the one generation in the catalog (2022–now), and the vinyl wrap film needed for a full wrap of the newest body. It gives the panel sizes, the parts that need cut-outs, and what changes between model years for someone who counts film. You will also find partial wrap options and answers to common questions. The Porsche 911 GT3 RS is a coupe with two doors and a length of 180.0 in (4,572 mm).

1generations15.5 mof film for a full wrap

Porsche 911 GT3 RS, first generation, factory photo
Porsche 911 GT3 RS, first generation. Factory color shown.

Porsche 911 GT3 RS wrap colors and ideas

  • Porsche 911 GT3 RS black wrap
  • Porsche 911 GT3 RS white wrap
  • Porsche 911 GT3 RS gray wrap
  • Porsche 911 GT3 RS silver wrap
  • Porsche 911 GT3 RS red wrap
  • Porsche 911 GT3 RS blue wrap
  • Porsche 911 GT3 RS green wrap
  • Porsche 911 GT3 RS yellow wrap
  • Porsche 911 GT3 RS orange wrap
  • Porsche 911 GT3 RS purple wrap
  • Porsche 911 GT3 RS pink wrap
  • Porsche 911 GT3 RS teal wrap
  • Porsche 911 GT3 RS brown wrap
  • Porsche 911 GT3 RS gold wrap
  • Porsche 911 GT3 RS chrome wrap
  • Porsche 911 GT3 RS color shift wrap
  • Porsche 911 GT3 RS carbon fiber wrap
  • Porsche 911 GT3 RS camo and patterned wrap

How much vinyl to wrap a Porsche 911 GT3 RS

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2022–nowcoupe (2 doors)180.0 in (4,572 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Porsche 911 GT3 RS wrap cost factors

The Porsche 911 GT3 RS wrap cost depends on the film type, the coverage area, and the amount of disassembly needed for the large rear wing and wide fenders. A full wrap of this 180.0 in (4,572 mm) coupe takes about 51 ft (15.5 m) of film, so a color change wrap costs more than a partial wrap. Paint protection film on the front end is another option, and the price depends on the film brand and the number of panels covered. Since this car has two long doors and complex curves, more labor time is needed than on a simpler body.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Porsche 911 GT3 RS wraps by generation

Swipe sideways. Tap a card for the full description.

Porsche 911 GT3 RS, first generation, factory photo
Factory color shown

2022–now Porsche 911 GT3 RS coupe (first generation)

2022–nowcoupe (2 doors)180.0 in (4,572 mm)

The first generation Porsche 911 GT3 RS (2022–now) is a coupe with two doors and a length of 180.0 in (4,572 mm), which translates to about 51 ft (15.5 m) of 60-inch (1.52 m) film for a full wrap. The two long side doors are each one large piece of film, so the wrap uses fewer seams but requires careful handling. The large rear wing and wide fenders add surface area and edges that must be wrapped or removed. For this generation, chrome or patterned film increases the amount to about 57 ft (17.5 m).

Two long side doors: each door is one large piece of film.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Porsche 911 GT3 RS

A Porsche 911 GT3 RS chrome delete covers the window trim and badges with black film, and it uses much less vinyl than a full wrap. A partial wrap on this car typically includes the roof, hood, and mirror caps, and it can be done with a color change film or a clear paint protection film on the front end. The large rear wing and side skirts are often left uncovered in a partial job. These smaller jobs are quicker and use less material, but the edges and curves of the hood and roof still need careful trimming.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Porsche 911 GT3 RS: body, cut-outs and film

The Porsche 911 GT3 RS vinyl wrap covers a two-door coupe body that is 180.0 in (4,572 mm) long, which means a manageable number of large panels but complex curves. The two long side doors are each one large piece of film, so they need careful stretching and positioning. The roof, hood, and front and rear bumpers are separate panels, and the wide fenders and rear wing add surface area and edges to tuck. A full wrap uses about 51 ft (15.5 m) of 60-inch (1.52 m) cast film, so plan your film order and cutting layout accordingly.

Porsche 911 GT3 RS wrap ideas include covering the entire body in a color change wrap or adding a clear paint protection film on the front end. The door handles, mirrors, and badges need cut-outs, and the large rear wing is often removed to wrap it properly. Since the car has no roof rails or complex trim, the main focus is on the wide fenders and the front splitter. You can also consider a chrome delete on the window trim and badges for a more uniform look.

How much vinyl to wrap a Porsche 911 GT3 RS depends on the generation, but since this page covers only the first generation (2022–now), the film estimate is fixed at about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires more material, about 57 ft (17.5 m), because the pattern must be matched across panels. The coupe body has two long side doors and large rear fenders, so the film must be cut in sections. When counting film for this car, allow extra for the bumpers, the wing, and the door jambs if you wrap them.

Questions about wrapping a Porsche 911 GT3 RS

How much vinyl does it take to wrap a Porsche 911 GT3 RS?

A full wrap of a Porsche 911 GT3 RS takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires more, about 57 ft (17.5 m), because the pattern must be matched across panels. This estimate is for the 2022–now coupe body with two long side doors and a large rear wing.

Can I wrap only the hood or the roof of a Porsche 911 GT3 RS?

Yes, you can wrap only the hood or the roof of a Porsche 911 GT3 RS as a partial wrap. This job typically includes the roof, hood, and mirror caps, and it uses much less film than a full wrap. The hood and roof are large single panels on this car, so they are straightforward to cover with one piece of film each.

Is a Porsche 911 GT3 RS hard to wrap?

The Porsche 911 GT3 RS is not the easiest car to wrap because of its complex curves, wide fenders, and large rear wing. The two long side doors are each one large piece of film, so you need to stretch the vinyl carefully to avoid wrinkles. The rear wing is often removed to wrap it properly, and the front splitter and side intakes have tight edges that require precise trimming.

How many generations of the Porsche 911 GT3 RS does this page cover?

This page covers one generation of the Porsche 911 GT3 RS, the first generation produced from 2022 to now. There are no older generations in this catalog, so all film amounts and panel information refer to that generation.