Wraps by car

Porsche 968 wrap

The Porsche 968 wrap page covers the first-generation car produced from 1991 to 1995. This single generation includes a convertible and a coupe body style. A full vinyl wrap of a 968 takes about 43 ft (13 m) for the convertible and 46 ft (14 m) for the coupe using 60-inch (1.52 m) cast film. Chrome or patterned film can require up to about 54 ft (16.5 m).

1generations13 mof film for a full wrap

Porsche 968, first generation, factory photo
Porsche 968, first generation. Factory color shown.

Porsche 968 wrap colors and ideas

  • Porsche 968 black wrap
  • Porsche 968 white wrap
  • Porsche 968 gray wrap
  • Porsche 968 silver wrap
  • Porsche 968 red wrap
  • Porsche 968 blue wrap
  • Porsche 968 green wrap
  • Porsche 968 yellow wrap
  • Porsche 968 orange wrap
  • Porsche 968 purple wrap
  • Porsche 968 pink wrap
  • Porsche 968 teal wrap
  • Porsche 968 brown wrap
  • Porsche 968 gold wrap
  • Porsche 968 chrome wrap
  • Porsche 968 color shift wrap
  • Porsche 968 carbon fiber wrap
  • Porsche 968 camo and patterned wrap

How much vinyl to wrap a Porsche 968

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1991–1995convertible, coupe (2 doors)170.1 in (4,320 mm)about 43 ft (13 m) for the convertible to 46 ft (14 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 54 ft (16.5 m)

Porsche 968 wrap cost factors

The Porsche 968 wrap cost depends on the size of the body and the film type. The coupe uses more film than the convertible, and chrome or patterned film takes up to about 54 ft (16.5 m). The car's 170.1 in (4,320 mm) length and large door panels mean careful material planning. Labor for removing parts and wrapping the side doors also affects the final cost.

  • Film for a full wrap: about 43 ft (13 m) for the convertible to 46 ft (14 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 54 ft (16.5 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.

Porsche 968 wraps by generation

Swipe sideways. Tap a card for the full description.

Porsche 968, first generation, factory photo
Factory color shown

1991–1995 Porsche 968 convertible, coupe (first generation)

1991–1995convertible, coupe (2 doors)170.1 in (4,320 mm)

The open top of the first-generation Porsche 968 is treated differently in a wrap. On the convertible, the fabric top is not wrapped and the vinyl ends where the top begins. A folding hard top is wrapped as its own separate panels. The coupe's solid roof is wrapped as part of the main body.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 43 ft (13 m) for the convertible to 46 ft (14 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a Porsche 968

A partial wrap on a Porsche 968 can cover the roof, hood, or mirror caps. Chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end only. These smaller jobs use less material than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Porsche 968: body, cut-outs and film

A Porsche 968 vinyl wrap follows the body style's long two-door shape. The coupe needs slightly more film than the convertible because of its solid roof. Each body is 170.1 in (4,320 mm) long, so a standard roll width works without seams on most panels. The two long side doors each take one large piece of film.

Porsche 968 wrap ideas often start with the parts that need cut-outs or removal. The front bumper, mirrors, door handles, and badges are removed or precisely trimmed around. The convertible's fabric top is not wrapped and the film ends where the top begins. A folding hard top, if fitted, is wrapped as separate panels.

How much vinyl to wrap a Porsche 968 depends on a few generation facts. Since there is only one generation, the film estimate stays between 43 ft (13 m) and 46 ft (14 m) for standard colors. Chrome or patterned film adds up to about 54 ft (16.5 m) because pattern matching uses extra material. The same body styles were produced throughout the run.

Questions about wrapping a Porsche 968

How much vinyl does it take to wrap a Porsche 968?

Yes, a Porsche 968 takes about 43 ft (13 m) for the convertible and 46 ft (14 m) for the coupe. These figures assume 60-inch (1.52 m) cast film. Chrome or patterned film can require up to about 54 ft (16.5 m).

Is the top of a Porsche 968 wrapped?

No, the fabric top of a Porsche 968 convertible is not wrapped. The film ends where the fabric begins. A folding hard top is wrapped as its own panels.

Which Porsche 968 body takes more film?

The coupe takes more film than the convertible. A coupe needs about 46 ft (14 m) while the convertible needs about 43 ft (13 m) of standard film. Chrome or patterned film raises the estimate to about 54 ft (16.5 m) for either body.

Can I wrap only the hood or the roof of a Porsche 968?

Yes, partial wraps are available for the Porsche 968. You can wrap only the hood, the roof, or the mirror caps. Chrome delete for the window trim and badges is also offered. Clear paint protection film on the front end is another partial option.