Wraps by car

Porsche 911 GT3 wrap

The Porsche 911 GT3 is a two-door sports car available in four generations from 1999 to today. A full wrap of the newest body uses about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 56 ft (17 m). The guide covers every generation and the small jobs as well.

4generations15.5 mof film for a full wrap

Porsche 911 GT3, fourth generation, factory photo
Porsche 911 GT3, fourth generation. Factory color shown.

Porsche 911 GT3 wrap colors and ideas

  • Porsche 911 GT3 black wrap
  • Porsche 911 GT3 white wrap
  • Porsche 911 GT3 gray wrap
  • Porsche 911 GT3 silver wrap
  • Porsche 911 GT3 red wrap
  • Porsche 911 GT3 blue wrap
  • Porsche 911 GT3 green wrap
  • Porsche 911 GT3 yellow wrap
  • Porsche 911 GT3 orange wrap
  • Porsche 911 GT3 purple wrap
  • Porsche 911 GT3 pink wrap
  • Porsche 911 GT3 teal wrap
  • Porsche 911 GT3 brown wrap
  • Porsche 911 GT3 gold wrap
  • Porsche 911 GT3 chrome wrap
  • Porsche 911 GT3 color shift wrap
  • Porsche 911 GT3 carbon fiber wrap
  • Porsche 911 GT3 camo and patterned wrap

How much vinyl to wrap a Porsche 911 GT3

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2021–nowcoupe (2 doors)179.9 in (4,570 mm) to 180.0 in (4,573 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)
2013–2020coupe (2 doors)178.9 in (4,545 mm) to 179.4 in (4,557 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)
2006–2011coupe (2 doors)174.3 in (4,427 mm) to 175.6 in (4,460 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)
1999–2005coupe (2 doors)174.4 in (4,430 mm) to 174.6 in (4,435 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

Porsche 911 GT3 wrap cost factors

Porsche 911 GT3 wrap cost depends on the amount of film, the number of cut-outs and the prep work. The film estimate ranges from about 48 ft (14.5 m) to 56 ft (17 m) across four generations, with the newest body at 51 ft (15.5 m) in cast film. The styling kit, parking sensors and cameras add more cutting and fitting time. Paint condition on older generations also affects preparation, since repainted panels need a test spot first.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.
  • Every trim has a styling kit on the bumpers and sills: more separate pieces to wrap.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Restyled in 2024: bumpers and lights differ between the versions, and so do the film cuts.

Porsche 911 GT3 wraps by generation

Swipe sideways. Tap a card for the full description.

Porsche 911 GT3, fourth generation, factory photo
Factory color shown

2021–now Porsche 911 GT3 coupe (fourth generation)

2021–nowcoupe (2 doors)179.9 in (4,570 mm) to 180.0 in (4,573 mm)

The fourth generation Porsche 911 GT3 was built from 2021 onward and restyled in 2024, so bumpers and lights changed. Film cut for one version of this coupe does not fit the other, even though the length stays near 179.9 in (4,570 mm) to 180.0 in (4,573 mm). A full wrap needs about 51 ft (15.5 m) of 60-inch cast film or about 56 ft (17 m) for chrome or patterned film.

Two long side doors: each door is one large piece of film.

Every trim has a styling kit on the bumpers and sills: more separate pieces to wrap.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Porsche 911 GT3, third generation, factory photo
Factory color shown

2013–2020 Porsche 911 GT3 coupe (third generation)

2013–2020coupe (2 doors)178.9 in (4,545 mm) to 179.4 in (4,557 mm)

The third generation Porsche 911 GT3 is a coupe built from 2013 to 2020, and it measures 178.9 in (4,545 mm) to 179.4 in (4,557 mm) long. The two long side doors are each one large piece of film, and the amount needed is about 51 ft (15.5 m) of 60-inch cast film. Some trims have parking sensors and cameras, so those cars need cut-outs. The 2017 restyling changed the bumpers, so cuts differ before and after.

Two long side doors: each door is one large piece of film.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Porsche 911 GT3, second generation, factory photo
Factory color shown

2006–2011 Porsche 911 GT3 coupe (second generation)

2006–2011coupe (2 doors)174.3 in (4,427 mm) to 175.6 in (4,460 mm)

The second generation Porsche 911 GT3 was produced from 2006 to 2011, with a restyling in 2009. On a car of these years the panels may be original or repainted, and a test spot comes before a full wrap to check film adhesion. This coupe is 174.3 in (4,427 mm) to 175.6 in (4,460 mm) long and uses about 49 ft (15 m) of 60-inch cast film. It has no factory cut-outs for sensors or cameras.

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Porsche 911 GT3, first generation, factory photo
Factory color shown

1999–2005 Porsche 911 GT3 coupe (first generation)

1999–2005coupe (2 doors)174.4 in (4,430 mm) to 174.6 in (4,435 mm)

The first generation Porsche 911 GT3 is a coupe made from 1999 to 2005, measuring 174.4 in (4,430 mm) to 174.6 in (4,435 mm) in length. A full wrap takes about 48 ft (14.5 m) of 60-inch cast film, which is the lowest amount for this model. The two side doors are each one large piece, so the installer handles fewer panels than on a four-door car. Chrome or patterned film would need about 54 ft (16.5 m).

Two long side doors: each door is one large piece of film.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a Porsche 911 GT3

For a Porsche 911 GT3, a partial wrap covers the roof, hood and mirror caps in the color or finish you choose. A chrome delete means covering window trim and badges with black film for a cleaner look. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. Each of these jobs uses less film than a full wrap and can be done on any generation.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Porsche 911 GT3: body, cut-outs and film

The Porsche 911 GT3 vinyl wrap covers a compact coupe body with two long side doors. The car measures from 174.3 in (4,427 mm) to 180.0 in (4,573 mm) depending on generation, which keeps film use moderate. Each side door is one large piece of film, so the installer needs long, wide sheets. The styling kit on bumpers and sills adds more separate pieces to wrap.

Porsche 911 GT3 wrap ideas start with removing badges, door handles and mirror caps for clean film edges. Every trim of the current car has parking sensors in the bumpers and cameras in the body, so the film is cut around each sensor and lens. Earlier generations have sensors and cameras only on some trims. The styling kit panels on the bumpers and sills also need separate film pieces.

How much vinyl to wrap a Porsche 911 GT3 depends mainly on the generation, since the bodies range from 174.3 in (4,427 mm) to 180.0 in (4,573 mm). The first generation needs about 48 ft (14.5 m) and the newest about 51 ft (15.5 m) of 60-inch film. Chrome or patterned film adds extra waste, so the latest bodies need about 56 ft (17 m). Restyling years changed bumpers and lights, so film cut for one version does not fit the other.

Questions about wrapping a Porsche 911 GT3

How much vinyl does it take to wrap a Porsche 911 GT3?

A full wrap of the newest Porsche 911 GT3 body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, the estimate is about 56 ft (17 m). The first generation needs about 48 ft (14.5 m) because it is slightly smaller.

Which years of the Porsche 911 GT3 take the same film cuts?

The fourth generation Porsche 911 GT3 (2021 onward) has one set of film cuts up to 2023 and another for 2024 onward, since the restyling changed bumpers and lights. The third generation (2013–2020) split at the 2017 restyling. The second generation (2006–2011) split at 2009, while the first generation (1999–2005) split at 2003.

Can I wrap only the hood or the roof of a Porsche 911 GT3?

Yes, a Porsche 911 GT3 can be wrapped only on the hood or the roof as a partial job. You can also add mirror caps or choose a full front-end paint protection film. A chrome delete of window trim and badges is another small job.

Is a Porsche 911 GT3 hard to wrap?

A Porsche 911 GT3 is moderately hard to wrap because the two long side doors require large, careful pieces and the styling kit adds more panels. The current generation has parking sensors and cameras on every trim, so the film must be cut around each one. The body is 174.3 in (4,427 mm) to 180.0 in (4,573 mm) long, which is small for a car but the coupe shape has few panel gaps.