Wraps by car

Chevrolet Astra wrap

The Chevrolet Astra wrap is a vinyl wrap project for one generation of this compact car, produced from 2003 to 2011. A full wrap of the newest hatchback or sedan body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, the estimate rises to about 59 ft (18 m). This page covers the film amounts, wrap ideas, and wrap difficulty for the Astra.

1generations14.5 mof film for a full wrap

Chevrolet Astra, first generation, factory photo
Chevrolet Astra, first generation. Factory color shown.

Chevrolet Astra wrap colors and ideas

  • Astra black wrap
  • Astra white wrap
  • Astra gray wrap
  • Astra silver wrap
  • Astra red wrap
  • Astra blue wrap
  • Astra green wrap
  • Astra yellow wrap
  • Astra orange wrap
  • Astra purple wrap
  • Astra pink wrap
  • Astra teal wrap
  • Astra brown wrap
  • Astra gold wrap
  • Astra chrome wrap
  • Astra color shift wrap
  • Astra carbon fiber wrap
  • Astra camo and patterned wrap

How much vinyl to wrap a Chevrolet Astra

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2003–2011hatchback, sedan (2 or 4 or 5 doors)161.8 in (4,110 mm) to 168.3 in (4,275 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Astra wrap cost factors

Astra wrap cost depends on the size of the job, the film you choose, and the body style of your car. The compact body needs about 48 ft (14.5 m) of 60-inch film for a full wrap, and the installer's time changes with the number of doors and the tailgate glass. A partial wrap of the hood or roof uses less film and less labor than a full color change. A chrome delete on the window trim and badges is a smaller job that costs less than a full wrap.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: hatchback, sedan (2 or 4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Astra wraps by generation

Swipe sideways. Tap a card for the full description.

Chevrolet Astra, first generation, factory photo
Factory color shown

2003–2011 Astra hatchback, sedan (first generation)

2003–2011hatchback, sedan (2 or 4 or 5 doors)161.8 in (4,110 mm) to 168.3 in (4,275 mm)

The first generation Chevrolet Astra came as a hatchback or a sedan, and the style decides the panel plan. A hatchback has a tailgate with the rear glass in it, so the film ends at the edge of the glass and needs a clean cut there. A sedan has a separate trunk lid, which is easier to wrap than a hatchback tailgate. Both styles fall within 161.8 in (4,110 mm) to 168.3 in (4,275 mm) in length, so the film amount is similar.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on an Astra

A partial wrap on an Astra can cover the roof, the hood, or the mirror caps. A chrome delete is another option: the installer covers the window trim and badges with black film. For front end protection, paint protection film (PPF) is a clear film that goes on the hood and bumper. These jobs use less film than a full wrap and let you change the look of the car without wrapping every panel.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Chevrolet Astra: body, cut-outs and film

A Chevrolet Astra vinyl wrap has to follow the body styles of this car, which came as a hatchback or a sedan with 2, 4, or 5 doors. The hatchback is shorter, from 161.8 in (4,110 mm) to 168.3 in (4,275 mm), and the sedan sits at the long end of that range. The style decides the panel plan because the door count changes the number of cut lines and seams. A hatchback also has a large tailgate that needs careful film alignment.

Astra wrap ideas often start with the tailgate, because the rear glass is set into the tailgate itself. The film ends at the edge of the glass, so the installer must trim around the glass cleanly. For a color change, the hood, roof, and mirror caps are panels you can wrap in a day. A chrome delete covers the window trim and badges with black film.

How much vinyl to wrap an Astra comes down to the body style and the film type, because the style sets the panel plan. A hatchback needs about 48 ft (14.5 m) of standard cast film, while a sedan of the same length uses the same amount. If you pick chrome or patterned film, order about 59 ft (18 m) to allow for pattern matching. The generation stayed the same from 2003 to 2011, so the film amount holds for all production years.

Questions about wrapping a Chevrolet Astra

How much vinyl does it take to wrap a Chevrolet Astra?

A full wrap of a Chevrolet Astra takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film for the hatchback or sedan. If you use chrome or patterned film, you need about 59 ft (18 m) to match the pattern across panels. The amount is the same for all years of the first generation because the body lengths stay in the same range.

Which Astra body takes more film?

The hatchback and the sedan take about the same amount of film, around 48 ft (14.5 m) of 60-inch cast film. The sedan can be slightly longer at 168.3 in (4,275 mm), but the difference is not enough to change the film order. The hatchback tailgate with its glass may require more care in cutting, not more film.

Can I wrap only the hood or the roof of an Astra?

Yes, you can wrap only the hood or the roof of an Astra as a partial wrap. The mirror caps are also a common small job, and a chrome delete covers the window trim and badges with black film. For protection, paint protection film (PPF) can be applied to the front end. These smaller jobs use less film than a full wrap.

Is an Astra hard to wrap?

An Astra is not hard to wrap for an installer, but the tailgate adds work because the rear glass is set into the tailgate itself. The film must end at the edge of the glass, so the installer trims carefully around it. The compact size of the car, at 161.8 in (4,110 mm) to 168.3 in (4,275 mm), keeps the panels manageable. The number of doors, from 2 to 5, also changes the number of cut lines.