Wraps by car

Chevrolet Bel Air wrap

The Chevrolet Bel Air wrap guide covers two generations of this full-size car and the film needed for each body style. A full wrap of the newest body takes about 52 ft (16 m) for the convertible and up to 62 ft (19 m) for the wagon when using 60-inch (1.52 m) cast vinyl wrap. This page explains how the body styles affect vinyl wrap coverage and what to expect when wrapping a Bel Air.

2generations16 mof film for a full wrap

Chevrolet Bel Air, second generation, factory photo
Chevrolet Bel Air, second generation. Factory color shown.

Chevrolet Bel Air wrap colors and ideas

  • Bel Air black wrap
  • Bel Air white wrap
  • Bel Air gray wrap
  • Bel Air silver wrap
  • Bel Air red wrap
  • Bel Air blue wrap
  • Bel Air green wrap
  • Bel Air yellow wrap
  • Bel Air orange wrap
  • Bel Air purple wrap
  • Bel Air pink wrap
  • Bel Air teal wrap
  • Bel Air brown wrap
  • Bel Air gold wrap
  • Bel Air chrome wrap
  • Bel Air color shift wrap
  • Bel Air carbon fiber wrap
  • Bel Air camo and patterned wrap

How much vinyl to wrap a Chevrolet Bel Air

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1955–1958convertible, coupe, sedan, wagon (2 or 3 or 4 doors)195.6 in (4,968 mm)about 52 ft (16 m) for the convertible to 62 ft (19 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 79 ft (24 m)
1949–1954convertible, coupe (2 doors)197.5 in (5,017 mm)about 52 ft (16 m) for the convertible to 54 ft (16.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m)

Bel Air wrap cost factors

The Bel Air wrap cost depends on the body style, the condition of the paint, and the film you choose. A wagon has more surface area than a convertible, so it needs more 60-inch (1.52 m) cast film. If the original paint is aged or has been repainted, the installer may need extra time to prepare the panels before the vinyl goes on. Using chrome or patterned film can increase the amount of material, up to about 79 ft (24 m) on the second generation.

  • Film for a full wrap: about 52 ft (16 m) for the convertible to 62 ft (19 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 79 ft (24 m).
  • Body: convertible, coupe, sedan, wagon (2 or 3 or 4 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Bel Air wraps by generation

Swipe sideways. Tap a card for the full description.

Chevrolet Bel Air, second generation, factory photo
Factory color shown

1955–1958 Bel Air convertible, coupe, sedan, wagon (second generation)

1955–1958convertible, coupe, sedan, wagon (2 or 3 or 4 doors)195.6 in (4,968 mm)

On the second-generation Chevrolet Bel Air, the open top is not covered by vinyl wrap. A fabric convertible top is left unwrapped and the film ends where the top meets the body. A folding hard top is wrapped as separate panels of its own, so the film can move with the mechanism.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 52 ft (16 m) for the convertible to 62 ft (19 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 79 ft (24 m).

Chevrolet Bel Air, first generation, factory photo
Factory color shown

1949–1954 Bel Air convertible, coupe (first generation)

1949–1954convertible, coupe (2 doors)197.5 in (5,017 mm)

On a first-generation Chevrolet Bel Air, paint age matters before a full wrap. Panels from 1949–1954 may be original or repainted, and a test spot shows whether the film will bond well. If the paint is flaking or too rough, it must be corrected or the wrap will not lay flat.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 52 ft (16 m) for the convertible to 54 ft (16.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a Bel Air

A partial wrap on a Chevrolet Bel Air can be just the roof, hood, or mirror caps. Bel Air chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to shield it from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Chevrolet Bel Air: body, cut-outs and film

The Chevrolet Bel Air vinyl wrap depends on the body style, because the car came as a convertible, coupe, sedan, or wagon with two, three, or four doors. The second-generation Bel Air measures 195.6 in (4,968 mm) long and the first-generation measures 197.5 in (5,017 mm). A wagon has more painted side area than a convertible, so it uses more film. A coupe with two long doors needs large door pieces that must be laid without distortion.

Bel Air wrap ideas start with the parts that need cut-outs or come off during the wrap. On a convertible, a fabric top is not wrapped and the film ends where it begins, while a folding hard top is wrapped as panels of its own. A tailgate with the rear glass in it means the film ends at the edge of the glass. On the first-generation coupe, each of the two long side doors is one large piece of film.

How much vinyl to wrap a Bel Air changes between the generations because the bodies differ in size and shape. The first-generation Bel Air was available only as a convertible or a two-door coupe, and a full wrap takes about 52 ft (16 m) to 54 ft (16.5 m) of 60-inch (1.52 m) cast film. The second-generation Bel Air added sedans and wagons, so a wagon can take about 62 ft (19 m) of the same film. For chrome or patterned film, the estimate goes up to about 70 ft (21.5 m) on the first generation and up to about 79 ft (24 m) on the second.

Questions about wrapping a Chevrolet Bel Air

How much vinyl does it take to wrap a Chevrolet Bel Air?

A Chevrolet Bel Air takes about 52 ft (16 m) to 62 ft (19 m) of 60-inch (1.52 m) cast vinyl for a full wrap, depending on the body style. The lower figure is for the second-generation convertible and the higher figure is for the second-generation wagon. Chrome or patterned film can increase the amount to about 79 ft (24 m).

Is the top of a Bel Air wrapped?

No, the fabric top of a Bel Air convertible is not wrapped. The film ends where the top begins. A folding hard top is wrapped as panels of its own.

Which Bel Air body takes more film?

A wagon takes more vinyl wrap than a convertible or coupe on the Chevrolet Bel Air. The second-generation wagon needs about 62 ft (19 m) of 60-inch film, while the convertible takes about 52 ft (16 m). The coupe falls between those figures.

Can I wrap only the hood or the roof of a Bel Air?

Yes, you can wrap only the hood or the roof of a Bel Air as a partial wrap. A partial wrap can also include the mirror caps. For a different look, you can do a chrome delete on the window trim and badges, or have clear paint protection film applied to the front end.