Wraps by car

Chevrolet Blazer K5 wrap

This page covers the Chevrolet Blazer K5 wrap across three generations from 1968 to 1994. A full vinyl wrap of the newest body takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the estimate to about 80 ft (24.5 m). The Blazer K5 is a three-door SUV with a tall, boxy body.

3generations19.5 mof film for a full wrap

Chevrolet Blazer K5, third generation, factory photo
Chevrolet Blazer K5, third generation. Factory color shown.

Chevrolet Blazer K5 wrap colors and ideas

  • Blazer K5 black wrap
  • Blazer K5 white wrap
  • Blazer K5 gray wrap
  • Blazer K5 silver wrap
  • Blazer K5 red wrap
  • Blazer K5 blue wrap
  • Blazer K5 green wrap
  • Blazer K5 yellow wrap
  • Blazer K5 orange wrap
  • Blazer K5 purple wrap
  • Blazer K5 pink wrap
  • Blazer K5 teal wrap
  • Blazer K5 brown wrap
  • Blazer K5 gold wrap
  • Blazer K5 chrome wrap
  • Blazer K5 color shift wrap
  • Blazer K5 carbon fiber wrap
  • Blazer K5 camo and patterned wrap

How much vinyl to wrap a Chevrolet Blazer K5

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1991–1994SUV (3 doors)188.0 in (4,775 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m)
1972–1991SUV (3 doors)184.8 in (4,694 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m)
1968–1971SUV (3 doors)177.5 in (4,508 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m)

Blazer K5 wrap cost factors

Blazer K5 wrap cost depends on the amount of film, the height of the roof, and the condition of the paint. The newest generation needs about 64 ft (19.5 m) of 60-inch cast film, while the first generation needs about 62 ft (19 m). The third generation is 71.0 in (1,803 mm) tall, so a platform adds labor time. Paint age on earlier generations may require extra prep work before the wrap.

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).
  • Body: SUV (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.
  • A tall body (71.0 in (1,803 mm)): the roof is wrapped from a platform.

Blazer K5 wraps by generation

Swipe sideways. Tap a card for the full description.

Chevrolet Blazer K5, third generation, factory photo
Factory color shown

1991–1994 Blazer K5 SUV (third generation)

1991–1994SUV (3 doors)188.0 in (4,775 mm)

The third generation Blazer K5 from 1991 to 1994 has a body height of 71.0 in (1,803 mm), so the roof is wrapped from a platform. That platform work takes more time than wrapping lower panels. The tall body also means the installer must reach the center of the roof with care. This generation is 188.0 in (4,775 mm) long and uses about 64 ft (19.5 m) of film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

A tall body (71.0 in (1,803 mm)): the roof is wrapped from a platform.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).

Chevrolet Blazer K5, second generation, factory photo
Factory color shown

1972–1991 Blazer K5 SUV (second generation)

1972–1991SUV (3 doors)184.8 in (4,694 mm)

The second generation Blazer K5 was produced from 1972 to 1991, and paint age can vary across those years. Some panels may be original or repainted, so a test spot comes before a full wrap. The test spot checks that the film adheres well to the existing paint. This generation is 184.8 in (4,694 mm) long and takes about 64 ft (19.5 m) of cast film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

A tall body (73.8 in (1,875 mm)): the roof is wrapped from a platform.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).

Chevrolet Blazer K5, first generation, factory photo
Factory color shown

1968–1971 Blazer K5 SUV (first generation)

1968–1971SUV (3 doors)177.5 in (4,508 mm)

The first generation Blazer K5 from 1968 to 1971 is the shortest at 177.5 in (4,508 mm), so it needs about 62 ft (19 m) of film. The three-door body has two long side doors, and each door is one large panel. The tailgate includes the rear glass, so the film ends at the edge of the glass. Overall, the size and body style mean fewer separate panels than a four-door vehicle.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

A tall body (72.8 in (1,848 mm)): the roof is wrapped from a platform.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).

Roof, hood, chrome delete and PPF on a Blazer K5

A partial wrap on a Chevrolet Blazer K5 can cover the roof, hood, or mirror caps. A chrome delete covers window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to protect against stone chips. These smaller jobs use less material than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Chevrolet Blazer K5: body, cut-outs and film

The Chevrolet Blazer K5 vinyl wrap involves large, flat panels but a tall roofline and long side doors. The body is a three-door SUV, and its 71.0 in (1,803 mm) height on the newest generation means roof work requires a platform. Each side door is one large piece of film, so installation on the doors is straightforward. Overall length is 188.0 in (4,775 mm), which is compact for a full-size SUV.

Blazer K5 wrap ideas start with a tailgate that has the rear glass in it, so the film ends at the edge of the glass. The two long side doors are each wrapped as one large piece, reducing visible seams. The tall body requires a platform when wrapping the roof. You might also consider a chrome delete to cover bright trim with black film.

How much vinyl to wrap a Blazer K5 depends on the generation, because lengths differ by a few inches. The first generation from 1968 to 1971 is 177.5 in (4,508 mm) long and takes about 62 ft (19 m) of cast film. The second generation from 1972 to 1991 is 184.8 in (4,694 mm) and needs about 64 ft (19.5 m). The third generation from 1991 to 1994 is 188.0 in (4,775 mm) and also takes about 64 ft (19.5 m).

Questions about wrapping a Chevrolet Blazer K5

How much vinyl does it take to wrap a Chevrolet Blazer K5?

A full wrap of a Chevrolet Blazer K5 takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, the estimate is about 80 ft (24.5 m). These figures apply to the newest generation from 1991 to 1994.

Can I wrap only the hood or the roof of a Blazer K5?

Yes, you can wrap only the hood or the roof of a Blazer K5. A partial wrap can cover the roof, hood, or mirror caps. A chrome delete covers window trim and badges, and paint protection film (PPF) covers the front end.

Is a Blazer K5 hard to wrap?

A Blazer K5 has some features that add work during wrapping. The tailgate has the rear glass in it, so the film must be cut carefully around the glass. The body is tall at up to 73.8 in (1,875 mm) on the second generation, so the roof is wrapped from a platform.

How many generations of the Blazer K5 does this page cover?

This page covers three generations of the Chevrolet Blazer K5. They are the first generation from 1968 to 1971, the second generation from 1972 to 1991, and the third generation from 1991 to 1994.