Wraps by car

Chevrolet Captiva Sport wrap

The Chevrolet Captiva Sport vinyl wrap page covers the first-generation SUV sold from 2006 to 2015. This single-generation body needs about 61 ft (18.5 m) of 60-inch (1.52 m) cast film for a full color change wrap.

1generations18.5 mof film for a full wrap

Chevrolet Captiva Sport, first generation, factory photo
Chevrolet Captiva Sport, first generation. Factory color shown.

Chevrolet Captiva Sport wrap colors and ideas

  • Captiva Sport black wrap
  • Captiva Sport white wrap
  • Captiva Sport gray wrap
  • Captiva Sport silver wrap
  • Captiva Sport red wrap
  • Captiva Sport blue wrap
  • Captiva Sport green wrap
  • Captiva Sport yellow wrap
  • Captiva Sport orange wrap
  • Captiva Sport purple wrap
  • Captiva Sport pink wrap
  • Captiva Sport teal wrap
  • Captiva Sport brown wrap
  • Captiva Sport gold wrap
  • Captiva Sport chrome wrap
  • Captiva Sport color shift wrap
  • Captiva Sport carbon fiber wrap
  • Captiva Sport camo and patterned wrap

How much vinyl to wrap a Chevrolet Captiva Sport

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2006–2015SUV (5 doors)180.1 in (4,575 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Captiva Sport wrap cost factors

Captiva Sport wrap cost depends on the film amount, the wrap type and the number of cut-outs. A color change wrap on this 180.1 in (4,575 mm) SUV takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the amount to about 69 ft (21 m). Preparation and removal of parts also affect the final quote.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2010: bumpers and lights differ between the versions, and so do the film cuts.

Captiva Sport wraps by generation

Swipe sideways. Tap a card for the full description.

Chevrolet Captiva Sport, first generation, factory photo
Factory color shown

2006–2015 Captiva Sport SUV (first generation)

2006–2015SUV (5 doors)180.1 in (4,575 mm)

The first generation Chevrolet Captiva Sport ran from 2006 to 2015 with a restyling in 2010. The restyling changed bumpers and lights, so film cut for one version does not fit the other. A wrap installer checking the front and rear will see which cuts are needed.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Captiva Sport

A partial wrap on a Captiva Sport works well for the roof, hood or mirror caps. Chrome delete on this SUV means covering the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Chevrolet Captiva Sport: body, cut-outs and film

A Chevrolet Captiva Sport vinyl wrap covers one five-door SUV body measuring 180.1 in (4,575 mm) long. The size means a full wrap uses about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the amount to about 69 ft (21 m).

Captiva Sport wrap ideas start with planning cut-outs for the fog lamps in every front bumper. The tailgate carries the rear glass, so the film ends at the glass edge. Removing door handles, mirrors and tail lights gives cleaner edges and fewer seams.

How much vinyl to wrap a Captiva Sport depends on whether the vehicle is before or after the 2010 restyling. Bumpers and lights changed that year, so film cut for one version does not fit the other. The overall length stays 180.1 in (4,575 mm) and the five-door body shape remains the same.

Questions about wrapping a Chevrolet Captiva Sport

How much vinyl does it take to wrap a Chevrolet Captiva Sport?

A Chevrolet Captiva Sport takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film for a full wrap. For chrome or patterned film the figure is about 69 ft (21 m). The estimate fits the five-door SUV body from 2006 to 2015.

Which years of the Captiva Sport take the same film cuts?

The 2006 to 2009 and 2010 to 2015 Captiva Sport versions take different film cuts. The 2010 restyling changed bumpers and lights, so pre-cut film from one period will not match the other. An installer can still cut film on the car for any year.

Can I wrap only the hood or the roof of a Captiva Sport?

Yes, you can wrap only the hood or the roof of a Captiva Sport. A partial wrap on this SUV includes the roof, hood and mirror caps, or you can choose just one part. Chrome delete on the window trim and badges is another small film job.

Is a Captiva Sport hard to wrap?

A Captiva Sport is not the hardest SUV to wrap but it has some extra work. Every trim has fog lamps in the front bumper so the installer must make cut-outs in the bumper film. The tailgate glass sits within the tailgate, so the film ends neatly at the glass edge, and the 180.1 in (4,575 mm) length means covering a large area.