Wraps by car

Chevrolet Captiva wrap

The Chevrolet Captiva wrap page covers the first generation SUV built from 2006 to 2017. A full wrap of the newest body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the estimate to about 72 ft (22 m).

1generations19 mof film for a full wrap

Chevrolet Captiva, first generation, factory photo
Chevrolet Captiva, first generation. Factory color shown.

Chevrolet Captiva wrap colors and ideas

  • Captiva black wrap
  • Captiva white wrap
  • Captiva gray wrap
  • Captiva silver wrap
  • Captiva red wrap
  • Captiva blue wrap
  • Captiva green wrap
  • Captiva yellow wrap
  • Captiva orange wrap
  • Captiva purple wrap
  • Captiva pink wrap
  • Captiva teal wrap
  • Captiva brown wrap
  • Captiva gold wrap
  • Captiva chrome wrap
  • Captiva color shift wrap
  • Captiva carbon fiber wrap
  • Captiva camo and patterned wrap

How much vinyl to wrap a Chevrolet Captiva

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2006–2017SUV (5 doors)182.5 in (4,635 mm) to 184.0 in (4,673 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Captiva wrap cost factors

Captiva wrap cost depends on the film area of this compact SUV and the labor to remove parts. The full body takes about 62 ft (19 m) of cast film, and roof rails or a sunroof add disassembly time. A color change wrap costs more than a partial wrap because every panel is covered.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • A tall body (69.1 in (1,756 mm)): the roof is wrapped from a platform.
  • Restyled in 2011, 2013: bumpers and lights differ between the versions, and so do the film cuts.

Captiva wraps by generation

Swipe sideways. Tap a card for the full description.

Chevrolet Captiva, first generation, factory photo
Factory color shown

2006–2017 Captiva SUV (first generation)

2006–2017SUV (5 doors)182.5 in (4,635 mm) to 184.0 in (4,673 mm)

The first generation Chevrolet Captiva changed twice during its 2006–2017 production run. In 2011 and 2013 the bumpers and lights were restyled, so film cut for one version does not fit the other. Wrappers should order templates for the exact production years of the car.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

A tall body (69.1 in (1,756 mm)): the roof is wrapped from a platform.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Captiva

A partial wrap on a Chevrolet Captiva suits the roof, hood, or mirror caps. A Captiva chrome delete covers window trim, decorative moldings and badges with black film. Paint protection film (PPF) in clear film on the front end guards the bumper and hood from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim, decorative moldings and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Chevrolet Captiva: body, cut-outs and film

A Chevrolet Captiva vinyl wrap has to follow the tall SUV body that measures 182.5 in (4,635 mm) to 184.0 in (4,673 mm). The five-door body means large door panels and rear quarter panels drive up film use. The tall body at 69.1 in (1,756 mm) makes the roof wrap awkward and film is wasted at every cut.

Captiva wrap ideas must allow for the tailgate with the rear glass in it, where the film ends at the edge of the glass. Some trims have a sunroof, so the roof film is cut around its opening. Roof rails on some trims come off before the roof is wrapped, or the film is cut along them. Bright decorative moldings stay bright next to the film unless a chrome delete covers them.

To work out how much vinyl to wrap a Captiva, note the restyling in 2011 and 2013 changed bumpers and lights. Film cut for one version does not fit the other, so extra material is needed to recut those sections. The length difference from 182.5 in (4,635 mm) to 184.0 in (4,673 mm) is a minor change.

Questions about wrapping a Chevrolet Captiva

How much vinyl does it take to wrap a Chevrolet Captiva?

A full wrap of a Chevrolet Captiva takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, expect to use about 72 ft (22 m). The restyled bumpers from 2011 and 2013 need extra film to recut those panels.

Can the roof of a Captiva be wrapped?

Yes, the roof of a Chevrolet Captiva can be wrapped. If the car has a sunroof, the film is cut around its opening. Roof rails come off before the roof is wrapped, or the film is cut along them.

Which years of the Captiva take the same film cuts?

The 2006 to 2010 Captiva models share one set of film cuts. The 2011 and 2013 restylings changed bumpers and lights, so later cars need different cuts. A first generation Captiva from 2006–2010 takes the same cuts as other early cars.

Can I wrap only the hood or the roof of a Captiva?

Yes, you can wrap only the hood or the roof of a Chevrolet Captiva. Partial wrap jobs typically cover the roof, hood, or mirror caps alone. A chrome delete on the window trim or badges is another small job.