Wraps by car

Chevrolet Celta wrap

The Chevrolet Celta wrap page covers the subcompact hatchback built from 2000 to 2015. This first generation was offered as a three- or five-door hatchback. A full vinyl wrap of the newest body takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film.

1generations13.5 mof film for a full wrap

Chevrolet Celta, first generation, factory photo
Chevrolet Celta, first generation. Factory color shown.

Chevrolet Celta wrap colors and ideas

  • Celta black wrap
  • Celta white wrap
  • Celta gray wrap
  • Celta silver wrap
  • Celta red wrap
  • Celta blue wrap
  • Celta green wrap
  • Celta yellow wrap
  • Celta orange wrap
  • Celta purple wrap
  • Celta pink wrap
  • Celta teal wrap
  • Celta brown wrap
  • Celta gold wrap
  • Celta chrome wrap
  • Celta color shift wrap
  • Celta carbon fiber wrap
  • Celta camo and patterned wrap

How much vinyl to wrap a Chevrolet Celta

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2000–2015hatchback (3 or 5 doors)147.6 in (3,748 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

Celta wrap cost factors

Celta wrap cost is based on film area, panel complexity, and the chosen film grade. A full wrap uses about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the amount to about 54 ft (16.5 m) due to pattern matching.

  • Film for a full wrap: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: hatchback (3 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 2006, 2011: bumpers and lights differ between the versions, and so do the film cuts.

Celta wraps by generation

Swipe sideways. Tap a card for the full description.

Chevrolet Celta, first generation, factory photo
Factory color shown

2000–2015 Celta hatchback (first generation)

2000–2015hatchback (3 or 5 doors)147.6 in (3,748 mm)

The first generation Chevrolet Celta was revised in 2006 and again in 2011 with new bumpers and lights. Film cut for one version does not fit the other, so a wrapper checks the production year before cutting. This affects pre-cut kits and partial pieces around the nose and tail.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a Celta

A partial wrap on a Chevrolet Celta can cover the roof, hood, or mirror caps. Celta chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is also applied as a clear film on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Chevrolet Celta: body, cut-outs and film

Chevrolet Celta vinyl wrap sizing starts with its compact footprint of 147.6 in (3,748 mm). The three- and five-door hatchback share the same basic shell, so panel sizes stay consistent. A wrap installer works with a small surface area and mostly flat panels on this car.

Celta wrap ideas should account for the tailgate with the rear glass in it. The film ends at the edge of the glass, which creates a clean border on the hatch. You can wrap the metal sections around the window without removing the glass.

How much vinyl to wrap a Celta depends on the restyling years of 2006 and 2011. Bumpers and lights changed in those updates, so film cut for one version does not fit the other. A full wrap on a pre-2006 car may use slightly more material around the older bumpers.

Questions about wrapping a Chevrolet Celta

How much vinyl does it take to wrap a Chevrolet Celta?

A full wrap on a Chevrolet Celta takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan on about 54 ft (16.5 m).

Which years of the Celta take the same film cuts?

The Celta was made from 2000 to 2015, but restyling in 2006 and 2011 changed the bumpers and lights. Film cuts from before 2006 do not fit later cars, and 2011 cars differ from 2006–2010 versions.

Can I wrap only the hood or the roof of a Celta?

Yes, you can wrap only the hood or the roof of a Celta as a partial wrap. Mirror caps and a chrome delete on window trim and badges are also separate jobs.

Is a Celta hard to wrap?

A Celta is not hard to wrap, but the tailgate with the rear glass adds one step. The film ends at the edge of the glass, so you trim carefully along that line. The small size means fewer large panels and less material handling.