Wraps by car

Chevrolet Chevelle wrap

A Chevrolet Chevelle wrap changes the look of this mid-size classic in a way that can be removed later. This page covers the three generations produced from 1963 to 1977. A full wrap of the newest body takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film.

3generations16.5 mof film for a full wrap

Chevrolet Chevelle, third generation, factory photo
Chevrolet Chevelle, third generation. Factory color shown.

Chevrolet Chevelle wrap colors and ideas

  • Chevelle black wrap
  • Chevelle white wrap
  • Chevelle gray wrap
  • Chevelle silver wrap
  • Chevelle red wrap
  • Chevelle blue wrap
  • Chevelle green wrap
  • Chevelle yellow wrap
  • Chevelle orange wrap
  • Chevelle purple wrap
  • Chevelle pink wrap
  • Chevelle teal wrap
  • Chevelle brown wrap
  • Chevelle gold wrap
  • Chevelle chrome wrap
  • Chevelle color shift wrap
  • Chevelle carbon fiber wrap
  • Chevelle camo and patterned wrap

How much vinyl to wrap a Chevrolet Chevelle

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1973–1977coupe (2 doors)196.9 in (5,000 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)
1967–1973convertible, coupe (2 doors)196.9 in (5,000 mm)about 52 ft (16 m) for the convertible to 54 ft (16.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m)
1963–1967coupe, sedan (2 or 4 doors)197.0 in (5,004 mm)about 54 ft (16.5 m) for the coupe to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m)

Chevelle wrap cost factors

Chevelle wrap cost depends on the body style, the film choice, and the amount of disassembly. A sedan has two extra doors and takes about 2 ft (0.6 m) more film than a coupe. Convertibles require careful trimming around the top opening. Chrome and patterned films need up to 69 ft (21 m) on the largest body.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Chevelle wraps by generation

Swipe sideways. Tap a card for the full description.

Chevrolet Chevelle, third generation, factory photo
Factory color shown

1973–1977 Chevelle coupe (third generation)

1973–1977coupe (2 doors)196.9 in (5,000 mm)

The third generation Chevrolet Chevelle was built from 1973 to 1977 as a coupe with two doors. Cars of this age may have original paint, repainted panels, or hidden rust under the paint. A test spot on a small area shows whether the film will bond well. The two long side doors are each wrapped as one large piece of film.

Two long side doors: each door is one large piece of film.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Chevrolet Chevelle, second generation, factory photo
Factory color shown

1967–1973 Chevelle convertible, coupe (second generation)

1967–1973convertible, coupe (2 doors)196.9 in (5,000 mm)

The second generation Chevrolet Chevelle, made from 1967 to 1973, was offered as a convertible and a coupe. On a convertible the fabric top is never wrapped and the film ends cleanly where the top meets the body. A folding hard top, if fitted, is wrapped as separate panels of its own. The coupe takes about 54 ft (16.5 m) of film and the convertible about 52 ft (16 m).

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 52 ft (16 m) for the convertible to 54 ft (16.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).

Chevrolet Chevelle, first generation, factory photo
Factory color shown

1963–1967 Chevelle coupe, sedan (first generation)

1963–1967coupe, sedan (2 or 4 doors)197.0 in (5,004 mm)

The first generation Chevrolet Chevelle from 1963 to 1967 came in a coupe and a sedan with two or four doors. The sedan needs about 56 ft (17 m) of film because of the two extra doors. The coupe needs about 54 ft (16.5 m). Both styles are about 197 inches long and have large side panels.

Film: about 54 ft (16.5 m) for the coupe to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Chevelle

A partial Chevelle wrap covers only chosen panels, often the roof, the hood, or the mirror caps. A chrome delete uses black film to cover the window trim and badges. Clear paint protection film (PPF) on the front end guards against stone chips. These smaller jobs still change the look without wrapping the whole body.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Chevrolet Chevelle: body, cut-outs and film

A Chevrolet Chevelle vinyl wrap works with two main body styles: a coupe with two doors and a sedan with four doors. The car is roughly 197 inches long, which gives the installer large, mostly flat side panels. A coupe needs about 54 ft (16.5 m) of film, while a sedan needs about 56 ft (17 m). The two long side doors on coupes are each wrapped as one large piece.

Chevelle wrap ideas usually start with deciding which trim and badges stay visible. The window trim and badges can be covered with black film for a chrome delete. Door handles, mirrors, and antenna bases are removed before the film goes on. On convertibles the fabric top is not wrapped and the film ends where the top begins.

To figure out how much vinyl to wrap a Chevelle you compare the three generations. The first generation from 1963 to 1967 offered coupes and sedans that take from 54 to 56 ft (16.5 to 17 m). The second generation from 1967 to 1973 includes convertibles that take about 52 ft (16 m) because the top is not wrapped. The third generation from 1973 to 1977 came only as a coupe and needs about 54 ft (16.5 m).

Questions about wrapping a Chevrolet Chevelle

How much vinyl does it take to wrap a Chevrolet Chevelle?

A full wrap of the newest Chevrolet Chevelle body takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. That figure covers the coupe from 1973 to 1977. Older generations need similar amounts: 52 to 56 ft (16 to 17 m).

Can I wrap only the hood or the roof of a Chevelle?

Yes, you can wrap only the hood or the roof of a Chevelle as a partial wrap. The hood is flat and large, which makes it one of the simpler panels to cover. The roof on a coupe is also straightforward. Mirrors, badges, and other small parts can be done separately.

Is a Chevelle hard to wrap?

A Chevelle is not especially hard to wrap, but its size and details add work. The car is about 197 inches long, so large panels need careful handling. The two long side doors are each one big piece of film, which takes patience to position. On convertibles the installer must trim the film precisely where the top meets the body.

How many generations of the Chevelle does this page cover?

This page covers three generations of the Chevrolet Chevelle. They are the first generation from 1963 to 1967, the second from 1967 to 1973, and the third from 1973 to 1977.