Wraps by car

Chevrolet Chevette wrap

This page covers the Chevrolet Chevette wrap, a full vinyl wrap for the single generation made from 1975 to 1987. The film estimate for a full wrap of this hatchback is about 48 ft (14.5 m) of 60-inch cast film. Chrome or patterned film needs more material, about 59 ft (18 m).

1generations14.5 mof film for a full wrap

Chevrolet Chevette, first generation, factory photo
Chevrolet Chevette, first generation. Factory color shown.

Chevrolet Chevette wrap colors and ideas

  • Chevette black wrap
  • Chevette white wrap
  • Chevette gray wrap
  • Chevette silver wrap
  • Chevette red wrap
  • Chevette blue wrap
  • Chevette green wrap
  • Chevette yellow wrap
  • Chevette orange wrap
  • Chevette purple wrap
  • Chevette pink wrap
  • Chevette teal wrap
  • Chevette brown wrap
  • Chevette gold wrap
  • Chevette chrome wrap
  • Chevette color shift wrap
  • Chevette carbon fiber wrap
  • Chevette camo and patterned wrap

How much vinyl to wrap a Chevrolet Chevette

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1975–1987hatchback (3 or 5 doors)164.9 in (4,188 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Chevette wrap cost factors

Chevette wrap cost depends on the film type, the condition of the paint, and the amount of surface area. A standard color change wrap uses about 48 ft (14.5 m), while chrome or patterned film uses about 59 ft (18 m). The small size of the Chevette means less material than a larger car. Labor time is also a factor because of the tailgate glass.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: hatchback (3 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Chevette wraps by generation

Swipe sideways. Tap a card for the full description.

Chevrolet Chevette, first generation, factory photo
Factory color shown

1975–1987 Chevette hatchback (first generation)

1975–1987hatchback (3 or 5 doors)164.9 in (4,188 mm)

The first generation Chevette (1975–1987) may have original or repainted paint. Before a full wrap, the installer should do a test spot to check how the film adheres. Panels with old paint can have different textures that affect the wrap. A repainted surface may need extra preparation.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Chevette

You can choose a partial wrap for the Chevette, such as the roof, hood, or mirror caps. Chrome delete is another option, covering the window trim and badges with black film. Paint protection film (PPF) can be applied as clear film on the front end. These jobs use less film than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Chevrolet Chevette: body, cut-outs and film

A Chevrolet Chevette vinyl wrap has to handle the compact hatchback body, which measures 164.9 in (4,188 mm) long. The 3-door and 5-door styles change how the film is cut around the door openings. Because the car is small, the wrap uses less film than a larger model. The short panels make it easier to work on each section.

Chevette wrap ideas should account for the tailgate with the rear glass in it. The film ends at the edge of the glass, so the installer trims carefully around that area. The door handles and badges need cut-outs or removal for a clean finish. The bumpers can be wrapped in a contrasting color for a two-tone look.

How much vinyl to wrap a Chevette depends on the body style and film choice, but this catalog lists one generation. The hatchback takes about 48 ft (14.5 m) of standard film. If you use chrome or patterned film, the estimate rises to 59 ft (18 m). You should add a little extra for mistakes or repairs.

Questions about wrapping a Chevrolet Chevette

How much vinyl does it take to wrap a Chevrolet Chevette?

It takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film to wrap a Chevrolet Chevette. That estimate covers the whole hatchback body. If you use chrome or patterned film, plan for about 59 ft (18 m).

Can I wrap only the hood or the roof of a Chevette?

Yes, you can wrap only the hood or the roof of a Chevette. A partial wrap can also cover mirror caps. These smaller jobs are a good way to change the look without a full wrap.

Is a Chevette hard to wrap?

A Chevette is not especially easy to wrap because the tailgate has the rear glass in it. The film must end at the edge of the glass, which takes careful trimming. The small size of the car helps, but the glass area adds work.

How many generations of the Chevette does this page cover?

This page covers one generation of the Chevette, made from 1975 to 1987. It was available as a hatchback with 3 or 5 doors. All body styles are included in the wrap estimates.