Wraps by car

Chevrolet Cobalt wrap

The Chevrolet Cobalt wrap page covers the subcompact sedan sold across two generations. Both generations are in this catalog, with the newest body running from 2013 to 2020. A full vinyl wrap of the newest Cobalt takes about 56 ft (17 m) of 60-inch (1.52 m) cast film.

2generations17 mof film for a full wrap

Chevrolet Cobalt, second generation, factory photo
Chevrolet Cobalt, second generation. Factory color shown.

Chevrolet Cobalt wrap colors and ideas

  • Cobalt black wrap
  • Cobalt white wrap
  • Cobalt gray wrap
  • Cobalt silver wrap
  • Cobalt red wrap
  • Cobalt blue wrap
  • Cobalt green wrap
  • Cobalt yellow wrap
  • Cobalt orange wrap
  • Cobalt purple wrap
  • Cobalt pink wrap
  • Cobalt teal wrap
  • Cobalt brown wrap
  • Cobalt gold wrap
  • Cobalt chrome wrap
  • Cobalt color shift wrap
  • Cobalt carbon fiber wrap
  • Cobalt camo and patterned wrap

How much vinyl to wrap a Chevrolet Cobalt

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2013–2020sedan (4 doors)176.3 in (4,479 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)
2004–2010coupe, sedan (2 or 4 doors)180.3 in (4,580 mm) to 180.5 in (4,584 mm)about 49 ft (15 m) for the coupe to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)

Cobalt wrap cost factors

A Cobalt wrap cost depends on the size of the car, the film chosen, and the labor for each panel. The newest generation is 176.3 in (4,479 mm) long and needs about 56 ft (17 m) of 60-inch (1.52 m) film. A first-generation coupe is smaller, starting at about 49 ft (15 m) of film, while the sedan matches the later car.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: sedan (4 doors).
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2015: bumpers and lights differ between the versions, and so do the film cuts.

Cobalt wraps by generation

Swipe sideways. Tap a card for the full description.

Chevrolet Cobalt, second generation, factory photo
Factory color shown

2013–2020 Cobalt sedan (second generation)

2013–2020sedan (4 doors)176.3 in (4,479 mm)

The second generation Chevrolet Cobalt ran from 2013 to 2020 and was restyled in 2015. The restyling changed the bumpers and lights, so film cut for one version does not fit the other. For a full wrap of this generation, estimate about 56 ft (17 m) of 60-inch (1.52 m) cast film.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Chevrolet Cobalt, first generation, factory photo
Factory color shown

2004–2010 Cobalt coupe, sedan (first generation)

2004–2010coupe, sedan (2 or 4 doors)180.3 in (4,580 mm) to 180.5 in (4,584 mm)

The first generation Chevrolet Cobalt was built from 2004 to 2010 as a coupe or sedan. Paint age on a car of these years means panels may be original or repainted, so a test spot comes before a full wrap. The coupe needs about 49 ft (15 m) of 60-inch (1.52 m) film, and the sedan about 56 ft (17 m).

Film: about 49 ft (15 m) for the coupe to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Cobalt

A Cobalt chrome delete covers the window trim and badges with black film. A partial wrap can be just the roof, hood, or mirror caps. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Chevrolet Cobalt: body, cut-outs and film

A Chevrolet Cobalt vinyl wrap follows the car's subcompact four-door sedan shape. The newest generation measures 176.3 in (4,479 mm) long, which keeps the roof and sides compact for a single installer. The first generation ran as a coupe or sedan and is slightly longer at 180.3 in (4,580 mm) to 180.5 in (4,584 mm).

Cobalt wrap ideas start with the front and rear bumpers, where film needs cut-outs for lights and sensors. Some trims of the second generation have fog lamps in the front bumper, so the bumper film must be trimmed around them. Door handles, mirrors, and antenna bases are removed before the film is laid for a clean edge.

To work out how much vinyl to wrap a Cobalt, compare the two generations. The second generation needs about 56 ft (17 m) of 60-inch (1.52 m) cast film for a full color change. The first generation needs about 49 ft (15 m) for the coupe and up to 56 ft (17 m) for the sedan, with chrome or patterned film taking more.

Questions about wrapping a Chevrolet Cobalt

How much vinyl does it take to wrap a Chevrolet Cobalt?

About 56 ft (17 m) of 60-inch (1.52 m) cast film wraps the newest Chevrolet Cobalt. This figure is for a full color change on the second generation body. Chrome or patterned film takes more because the pattern must be matched.

Which years of the Cobalt take the same film cuts?

The 2013 to 2014 Cobalts and the 2015 to 2020 Cobalts take the same film cuts within each group. The restyling in 2015 changed the bumpers and lights, so a 2013 bumper film does not fit a 2015 car.

Can I wrap only the hood or the roof of a Cobalt?

Yes, you can wrap only the hood or the roof of a Cobalt. A partial wrap often covers the roof, hood, or mirror caps. The film is cut to the size of the panel and does not have to extend to the bumpers.

Is a Cobalt hard to wrap?

A Cobalt is a small car, but the bumpers add work on some trims. The second generation can have fog lamps in the front bumper, which means cut-outs in the film. The first generation has no such lamps, so the bumper is a simpler shape.