Wraps by car

Chevrolet Corsa wrap

The Chevrolet Corsa wrap page covers the first-generation 1994–2001 subcompact in hatchback, sedan, and wagon forms. A full vinyl wrap needs about 44 ft (13.5 m) of 60-inch (1.52 m) cast film for the hatchback and up to 49 ft (15 m) for the wagon. The three body styles differ in length from 146.9 in (3,730 mm) to 159.7 in (4,056 mm), which changes material use.

1generations14 mof film for a full wrap

Chevrolet Corsa, first generation, factory photo
Chevrolet Corsa, first generation. Factory color shown.

Chevrolet Corsa wrap colors and ideas

  • Corsa black wrap
  • Corsa white wrap
  • Corsa gray wrap
  • Corsa silver wrap
  • Corsa red wrap
  • Corsa blue wrap
  • Corsa green wrap
  • Corsa yellow wrap
  • Corsa orange wrap
  • Corsa purple wrap
  • Corsa pink wrap
  • Corsa teal wrap
  • Corsa brown wrap
  • Corsa gold wrap
  • Corsa chrome wrap
  • Corsa color shift wrap
  • Corsa carbon fiber wrap
  • Corsa camo and patterned wrap

How much vinyl to wrap a Chevrolet Corsa

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1994–2001hatchback, sedan, wagon (3 or 4 or 5 doors)146.9 in (3,730 mm) to 159.7 in (4,056 mm)about 44 ft (13.5 m) for the hatchback to 49 ft (15 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m)

Corsa wrap cost factors

Corsa wrap cost depends on the body style, the film, and how many panels are wrapped. The wagon needs more material than the hatchback, so it costs more. A cast film with a pattern or chrome finish costs more than a solid color. Labor is set by the panel plan and the cut-outs around the tailgate glass.

  • Film for a full wrap: about 44 ft (13.5 m) for the hatchback to 49 ft (15 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m).
  • Body: hatchback, sedan, wagon (3 or 4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Corsa wraps by generation

Swipe sideways. Tap a card for the full description.

Chevrolet Corsa, first generation, factory photo
Factory color shown

1994–2001 Corsa hatchback, sedan, wagon (first generation)

1994–2001hatchback, sedan, wagon (3 or 4 or 5 doors)146.9 in (3,730 mm) to 159.7 in (4,056 mm)

The first-generation Chevrolet Corsa, built from 1994 to 2001, came as a hatchback, sedan, and wagon. The style decides the panel plan: the hatchback has three doors, the sedan four doors, and the wagon five doors. The film amount starts at about 44 ft (13.5 m) for the hatchback and rises to about 49 ft (15 m) for the wagon. The body is a subcompact, so the panels are small and easy to handle.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 44 ft (13.5 m) for the hatchback to 49 ft (15 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Corsa

Partial wrap jobs on a Chevrolet Corsa include the roof, hood, and mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) can be applied as clear film on the front end. These smaller jobs use less material and take less time than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Chevrolet Corsa: body, cut-outs and film

A Chevrolet Corsa vinyl wrap uses the body style to set the panel plan and film amount. The hatchback is the shortest and takes the least film, while the longer sedan and wagon need more material. The wagon's tall rear end and extra side glass add surface area. Each panel can be wrapped separately, so a color change wrap is possible on any style.

Corsa wrap ideas start with the tailgate: the rear glass is set into it, so the film ends at the edge of the glass. The front and rear bumpers wrap as one piece each, and the side mirrors come off for a clean edge. Door handles and badges are removed before wrapping, and the fuel filler door is wrapped separately. The roof rails on the wagon stay in place and the film is cut around them.

To know how much vinyl to wrap a Corsa, compare the three body styles. The hatchback uses about 44 ft (13.5 m) of 60-inch (1.52 m) cast film, and the wagon up to 49 ft (15 m). A patterned or chrome film needs up to about 62 ft (19 m) because matching patterns adds waste. This car has one generation, so the film amount does not change by year.

Questions about wrapping a Chevrolet Corsa

How much vinyl does it take to wrap a Chevrolet Corsa?

A full wrap of a Chevrolet Corsa takes about 44 ft (13.5 m) for the hatchback and up to 49 ft (15 m) for the wagon, using 60-inch (1.52 m) cast film. The sedan is in between. These figures include waste for cutting around the panels.

Which Corsa body takes more film?

The wagon takes more film than the sedan, and the sedan takes more than the hatchback. The hatchback uses about 44 ft (13.5 m), the wagon about 49 ft (15 m). The extra length and the taller rear of the wagon add surface area.

Can I wrap only the hood or the roof of a Corsa?

Yes, you can wrap only the hood or the roof of a Corsa. These are common partial wrap jobs, and the mirror caps can be done the same day. A partial wrap uses less film and is easier to budget than a full wrap.

Is a Corsa hard to wrap?

A Corsa is not hard to wrap, but the tailgate with the rear glass set into it adds work. The film must be cut cleanly at the edge of the glass, which takes time. The small panel size helps, but the three body styles each have different panel shapes.