Wraps by car

Chevrolet Cruze (HR) wrap

The Chevrolet Cruze (HR) wrap page covers the first generation hatchback built from 2001 to 2008. This single-generation body style uses about 48 ft (14.5 m) of 60-inch (1.52 m) cast film for a full vinyl wrap. A chrome or patterned film increases the material estimate to about 56 ft (17 m).

1generations14.5 mof film for a full wrap

Chevrolet Cruze (HR), first generation, factory photo
Chevrolet Cruze (HR), first generation. Factory color shown.

Chevrolet Cruze (HR) wrap colors and ideas

  • Cruze (HR) black wrap
  • Cruze (HR) white wrap
  • Cruze (HR) gray wrap
  • Cruze (HR) silver wrap
  • Cruze (HR) red wrap
  • Cruze (HR) blue wrap
  • Cruze (HR) green wrap
  • Cruze (HR) yellow wrap
  • Cruze (HR) orange wrap
  • Cruze (HR) purple wrap
  • Cruze (HR) pink wrap
  • Cruze (HR) teal wrap
  • Cruze (HR) brown wrap
  • Cruze (HR) gold wrap
  • Cruze (HR) chrome wrap
  • Cruze (HR) color shift wrap
  • Cruze (HR) carbon fiber wrap
  • Cruze (HR) camo and patterned wrap

How much vinyl to wrap a Chevrolet Cruze (HR)

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2001–2008hatchback (5 doors)142.7 in (3,625 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Cruze (HR) wrap cost factors

Cruze (HR) wrap cost depends on the size of the body, the film you choose, and the condition of the paint. This first generation hatchback is 142.7 in (3,625 mm) long, so the full wrap uses about 48 ft (14.5 m) of 60-inch (1.52 m) cast film, or about 56 ft (17 m) for chrome or patterned film. A car of this age may have repainted panels, so an installer may need extra time for paint correction before wrapping. The five-door body also means more cut lines and more labor on the tailgate with its rear glass.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Cruze (HR) wraps by generation

Swipe sideways. Tap a card for the full description.

Chevrolet Cruze (HR), first generation, factory photo
Factory color shown

2001–2008 Cruze (HR) hatchback (first generation)

2001–2008hatchback (5 doors)142.7 in (3,625 mm)

The first generation Chevrolet Cruze (HR) was built from 2001 to 2008 as a five-door hatchback. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. Paint age affects adhesion, so any failing clear coat or rust must be addressed first. The single body style means every first-generation Cruze (HR) has the same number of doors and the same tailgate glass that ends the film edge.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Cruze (HR)

A partial wrap on a Cruze (HR) can cover the roof, hood, or mirror caps without wrapping the whole car. Chrome delete is also offered: window trim and badges are covered with black film. Paint protection film (PPF) is a clear film for the front end, including the bumper, part of the hood, and mirror backs.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Chevrolet Cruze (HR): body, cut-outs and film

A Chevrolet Cruze (HR) vinyl wrap has to fit a subcompact hatchback with five doors and a length of 142.7 in (3,625 mm). The five-door layout means each door, the roof, and the tailgate receive separate film pieces. Because the body is small, a full wrap takes less material than a longer car. Installers still cut and finish every panel edge by hand.

Cruze (HR) wrap ideas start with the tailgate, which includes the rear glass, so the film stops at the glass edge. The tailgate needs a precise relief cut to follow the glass outline without leaving exposed paint. On this car, door handles, mirrors, and badges are removed for a cleaner finish. Cut-outs around the rear wiper and the high-mounted brake light are also part of the job.

To know how much vinyl to wrap a Cruze (HR), count one generation only: the first generation produced from 2001 to 2008. The catalog lists a single body style, a hatchback with five doors, so there are no sedan or wagon versions to change the estimate. The film figure is based on the 142.7 in (3,625 mm) length and the five-door panel count. A patterned or chrome film adds roughly 8 ft (2.4 m) because of alignment and matching waste.

Questions about wrapping a Chevrolet Cruze (HR)

How much vinyl does it take to wrap a Chevrolet Cruze (HR)?

A full Chevrolet Cruze (HR) wrap takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. If you use chrome or patterned film, the estimate rises to about 56 ft (17 m) because of pattern matching and extra waste.

Can I wrap only the hood or the roof of a Cruze (HR)?

Yes, you can wrap only the hood or the roof of a Cruze (HR). The partial jobs offered include the roof, hood, and mirror caps, plus chrome delete on window trim and badges, and clear paint protection film (PPF) on the front end.

Is a Cruze (HR) hard to wrap?

A Cruze (HR) is not hard to wrap, but the tailgate adds one extra step. The rear glass is set into the tailgate, so the film ends at the edge of the glass and the installer must make a clean relief cut around it. The car is short at 142.7 in (3,625 mm), so a single installer can handle most panels without help.

How many generations of the Cruze (HR) does this page cover?

This page covers one generation of the Chevrolet Cruze (HR): the first generation, built from 2001 to 2008. It is the only generation in the catalog, with one body style, a five-door hatchback.