Wraps by car

Chevrolet Deluxe wrap

A Chevrolet Deluxe wrap covers the 1949–1952 first generation car in vinyl wrap, and a full wrap of the newest body takes about 59 ft (18 m) to 62 ft (19 m) of 60-inch (1.52 m) cast film.

1generations18 mof film for a full wrap

Chevrolet Deluxe, first generation, factory photo
Chevrolet Deluxe, first generation. Factory color shown.

Chevrolet Deluxe wrap colors and ideas

  • Deluxe black wrap
  • Deluxe white wrap
  • Deluxe gray wrap
  • Deluxe silver wrap
  • Deluxe red wrap
  • Deluxe blue wrap
  • Deluxe green wrap
  • Deluxe yellow wrap
  • Deluxe orange wrap
  • Deluxe purple wrap
  • Deluxe pink wrap
  • Deluxe teal wrap
  • Deluxe brown wrap
  • Deluxe gold wrap
  • Deluxe chrome wrap
  • Deluxe color shift wrap
  • Deluxe carbon fiber wrap
  • Deluxe camo and patterned wrap

How much vinyl to wrap a Chevrolet Deluxe

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1949–1952convertible, coupe, sedan (2 or 4 doors)196.9 in (5,001 mm)about 59 ft (18 m) for the convertible to 62 ft (19 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m)

Deluxe wrap cost factors

The Deluxe wrap cost depends on the amount of vinyl, the body style, and the labor for a car of 196.9 in (5,001 mm) with a full wrap needing 59 ft (18 m) to 62 ft (19 m) of 60-inch (1.52 m) cast film. A sedan uses more material than a convertible, which raises the cost. Chrome delete or patterned film can push the total up to about 70 ft (21.5 m). The condition of the paint and how much trim must be removed also affect the final figure.

  • Film for a full wrap: about 59 ft (18 m) for the convertible to 62 ft (19 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m).
  • Body: convertible, coupe, sedan (2 or 4 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Deluxe wraps by generation

Swipe sideways. Tap a card for the full description.

Chevrolet Deluxe, first generation, factory photo
Factory color shown

1949–1952 Deluxe convertible, coupe, sedan (first generation)

1949–1952convertible, coupe, sedan (2 or 4 doors)196.9 in (5,001 mm)

On the convertible, the fabric top is not wrapped and the film ends where the top begins at the beltline. A folding hard top is wrapped as separate panels of its own, so the film follows each section of the roof. The installer cuts the vinyl cleanly along the edge where the top meets the body. This keeps the open top working as it should.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 59 ft (18 m) for the convertible to 62 ft (19 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a Deluxe

A partial wrap on this car can cover the roof, hood, or mirror caps, and Deluxe chrome delete changes window trim and badges to black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These jobs use less material than a full wrap and still change the look of the car. Mixing a partial wrap with chrome delete gives a balanced two-tone effect.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Chevrolet Deluxe: body, cut-outs and film

The Chevrolet Deluxe vinyl wrap must handle a compact body of 196.9 in (5,001 mm) offered as a convertible, coupe, and two- or four-door sedan. A full wrap of the sedan uses up to 62 ft (19 m) of film, while the convertible needs about 59 ft (18 m). The different body styles change how the film is cut around windows, doors, and the roof area. Planning the wrap around these sizes helps you order the right amount of material.

Deluxe wrap ideas include removing door handles, mirrors, and trim pieces for a cleaner finish, then covering the body with cast vinyl film. The convertible body has a fabric top that is not wrapped and the film ends where the top begins, but a folding hard top is wrapped as panels of its own. Chrome or patterned film can be used for accents, and that adds up to about 70 ft (21.5 m) for a full design. Working around these parts keeps the edges tidy and the film down tight.

For someone counting film, the 1949–1952 first generation changes how much vinyl to wrap a Deluxe because the bodies share one length of 196.9 in (5,001 mm) but differ in roof style. The sedan uses the most film at about 62 ft (19 m), while the convertible uses about 59 ft (18 m) because there is no roof to cover. A coupe falls between those figures depending on its roof shape and trim. Measuring the actual panels before cutting is the safest way to confirm the amount.

Questions about wrapping a Chevrolet Deluxe

How much vinyl does it take to wrap a Chevrolet Deluxe?

It takes about 59 ft (18 m) for the convertible to 62 ft (19 m) for the sedan of 60-inch (1.52 m) cast vinyl to wrap a Chevrolet Deluxe. That figure covers a full color change on the 1949–1952 body. Chrome or patterned film can add up to about 70 ft (21.5 m). The exact amount depends on the body style and how many trim pieces are removed.

Is the top of a Deluxe wrapped?

The top of a Deluxe is wrapped only if it is a hard top panel, while the fabric top of the convertible is left alone and the film ends where it begins. A folding hard top is wrapped as panels of its own. This keeps the convertible mechanism working and avoids damage to the fabric. The installer stops the vinyl at the beltline where the top meets the body.

Which Deluxe body takes more film?

The four-door sedan takes more film than any other Deluxe body, needing about 62 ft (19 m) of 60-inch (1.52 m) vinyl. The convertible uses the least at about 59 ft (18 m) because it has no roof to cover. The coupe sits between them depending on its roof shape. Adding chrome or patterned film can push any body up to about 70 ft (21.5 m).

Can I wrap only the hood or the roof of a Deluxe?

You can wrap only the hood or the roof of a Deluxe as a partial wrap, along with mirror caps or a chrome delete on window trim and badges. Paint protection film (PPF) is another partial option that puts clear film on the front end. These smaller jobs use less material than a full wrap and can be done in stages. Mixing a partial wrap with chrome delete gives a custom look without covering the whole car.