Wraps by car

Chevrolet Epica wrap

The Chevrolet Epica wrap page covers the first-generation sedan built from 2006 to 2013. This mid-size car has one generation in the catalog with the V250 body code. A full vinyl wrap of the newest Epica body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film.

1generations18 mof film for a full wrap

Chevrolet Epica, first generation, factory photo
Chevrolet Epica, first generation. Factory color shown.

Chevrolet Epica wrap colors and ideas

  • Epica black wrap
  • Epica white wrap
  • Epica gray wrap
  • Epica silver wrap
  • Epica red wrap
  • Epica blue wrap
  • Epica green wrap
  • Epica yellow wrap
  • Epica orange wrap
  • Epica purple wrap
  • Epica pink wrap
  • Epica teal wrap
  • Epica brown wrap
  • Epica gold wrap
  • Epica chrome wrap
  • Epica color shift wrap
  • Epica carbon fiber wrap
  • Epica camo and patterned wrap

How much vinyl to wrap a Chevrolet Epica

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2006–2013sedan (4 doors)189.2 in (4,805 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Epica wrap cost factors

The Epica wrap cost depends on the film, the coverage, and the labor for the car. A color change wrap with chrome or patterned film takes about 69 ft (21 m), more than a standard wrap at about 59 ft (18 m). The sedan's four doors, the long roof, and the bumper cut-outs for sensors and fog lamps add time.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: sedan (4 doors).
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2009: bumpers and lights differ between the versions, and so do the film cuts.

Epica wraps by generation

Swipe sideways. Tap a card for the full description.

Chevrolet Epica, first generation, factory photo
Factory color shown

2006–2013 Epica sedan (first generation)

2006–2013sedan (4 doors)189.2 in (4,805 mm)

The first generation Chevrolet Epica was built from 2006 to 2013 as a four-door sedan. The body code V250 stayed the same through the run, but the car was restyled in 2009. The restyling changed the bumpers and lights, so film cut for one version does not fit the other.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on an Epica

A partial wrap on a Chevrolet Epica covers the roof, the hood, or the mirror caps instead of the whole car. An Epica chrome delete turns the bright window trim and badges black with film. Paint protection film (PPF) is a clear option for the front end, and it protects the hood, fenders, and bumper from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Chevrolet Epica: body, cut-outs and film

The Chevrolet Epica vinyl wrap fits one body style: a sedan with four doors. The car is 189.2 in (4,805 mm) long, a mid-size footprint that puts the material estimate at about 59 ft (18 m). Chrome or patterned film calls for more film, about 69 ft (21 m), because pattern matching and trim coverage add waste.

For Epica wrap ideas, plan around the parts that need cut-outs or removal. Every trim has fog lamps in the front bumper, so the bumper film gets a cut-out around each lamp. Some trims also have parking sensors in the bumpers, and the film is cut around each sensor to keep them working.

The question of how much vinyl to wrap an Epica has one answer for this generation. The car was built with one body code, V250, from 2006 to 2013, and the restyle in 2009 changed the bumpers and lights. Film cut for a pre-2009 car does not fit a later one, so the year matters for pre-cut kits.

Questions about wrapping a Chevrolet Epica

How much vinyl does it take to wrap a Chevrolet Epica?

A Chevrolet Epica takes about 59 ft (18 m) of 60-inch (1.52 m) cast film for a full wrap. If the wrap uses chrome or patterned film, the estimate rises to about 69 ft (21 m). The Epica is a mid-size sedan, so a full color change wrap fits within these numbers for the one body style built.

Which years of the Epica take the same film cuts?

The Epica years 2006 to 2008 share the same film cuts, and the years 2009 to 2013 share the same cuts. The restyle in 2009 changed the bumpers and lights, so a kit cut for an early car does not fit a later one. The body code V250 stayed the same, but the front and rear ends differ.

Can I wrap only the hood or the roof of an Epica?

Yes, you can wrap only the hood or the roof of an Epica. A partial wrap on this car often covers the roof, the hood, or the mirror caps. An Epica chrome delete covers the window trim and badges, and paint protection film (PPF) covers the front end in clear film.

Is an Epica hard to wrap?

An Epica is not the hardest car to wrap, but some parts add work. Every trim has fog lamps in the front bumper, so the installer cuts the film around each lamp. Some trims have parking sensors, which also need cut-outs, and the mid-size body uses about 59 ft (18 m) of film.