Wraps by car

Chevrolet Fleetmaster wrap

This page covers the Chevrolet Fleetmaster wrap, the vinyl wrap options for the 1946–1948 first generation, and the film a full wrap of the newest body takes. The Fleetmaster was offered in convertible, coupe, sedan, and wagon styles. A complete wrap needs about 52 ft (16 m) for the convertible to 62 ft (19 m) for the wagon, using 60-inch (1.52 m) cast film.

1generations16 mof film for a full wrap

Chevrolet Fleetmaster, first generation, factory photo
Chevrolet Fleetmaster, first generation. Factory color shown.

Chevrolet Fleetmaster wrap colors and ideas

  • Fleetmaster black wrap
  • Fleetmaster white wrap
  • Fleetmaster gray wrap
  • Fleetmaster silver wrap
  • Fleetmaster red wrap
  • Fleetmaster blue wrap
  • Fleetmaster green wrap
  • Fleetmaster yellow wrap
  • Fleetmaster orange wrap
  • Fleetmaster purple wrap
  • Fleetmaster pink wrap
  • Fleetmaster teal wrap
  • Fleetmaster brown wrap
  • Fleetmaster gold wrap
  • Fleetmaster chrome wrap
  • Fleetmaster color shift wrap
  • Fleetmaster carbon fiber wrap
  • Fleetmaster camo and patterned wrap

How much vinyl to wrap a Chevrolet Fleetmaster

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1946–1948convertible, coupe, sedan, wagon (2 or 4 or 5 doors)197.8 in (5,023 mm)about 52 ft (16 m) for the convertible to 62 ft (19 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 80 ft (24.5 m)

Fleetmaster wrap cost factors

Fleetmaster wrap cost depends on the body style, film type, and the amount of chrome trim. A wagon needs more film than a convertible—up to 62 ft (19 m) versus 52 ft (16 m) for a standard color change. Using chrome or patterned film can push the total to about 80 ft (24.5 m). Labor for roof and complex curves also affects the final cost.

  • Film for a full wrap: about 52 ft (16 m) for the convertible to 62 ft (19 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 80 ft (24.5 m).
  • Body: convertible, coupe, sedan, wagon (2 or 4 or 5 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Fleetmaster wraps by generation

Swipe sideways. Tap a card for the full description.

Chevrolet Fleetmaster, first generation, factory photo
Factory color shown

1946–1948 Fleetmaster convertible, coupe, sedan, wagon (first generation)

1946–1948convertible, coupe, sedan, wagon (2 or 4 or 5 doors)197.8 in (5,023 mm)

The first-generation Fleetmaster has an open top on the convertible that is not wrapped. The fabric top remains uncovered and the vinyl film ends where the top begins. If the car has a folding hard top, that top is wrapped as panels of its own. This preserves the top's function and appearance.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 52 ft (16 m) for the convertible to 62 ft (19 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 80 ft (24.5 m).

Roof, hood, chrome delete and PPF on a Fleetmaster

A partial wrap on a Fleetmaster can cover the roof, hood, or mirror caps. Fleetmaster chrome delete involves covering window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against road debris.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Chevrolet Fleetmaster: body, cut-outs and film

The Chevrolet Fleetmaster vinyl wrap covers a body that ranges from 197.8 in (5,023 mm) in length across all styles. The convertible, coupe, sedan, and wagon shapes each present different panel sizes and contours. This means material use varies from about 52 ft (16 m) to 62 ft (19 m), depending on the body style.

Fleetmaster wrap ideas should account for the open top on the convertible, where the fabric top is not wrapped and the film ends where it begins. On a wagon, the tailgate with rear glass requires cutting the film at the glass edge. Chrome trim can be covered with black film in a chrome delete, or left exposed for contrast.

To estimate how much vinyl to wrap a Fleetmaster, compare the body styles. The 1946–1948 generation offers one range: about 52 ft (16 m) for the convertible to 62 ft (19 m) for the wagon. A 60-inch (1.52 m) cast film is used, and chrome or patterned film may require up to about 80 ft (24.5 m).

Questions about wrapping a Chevrolet Fleetmaster

How much vinyl does it take to wrap a Chevrolet Fleetmaster?

A Chevrolet Fleetmaster wrap takes about 52 ft (16 m) for the convertible to 62 ft (19 m) for the wagon, using 60-inch (1.52 m) cast film. The exact amount depends on the body style and whether you add chrome or patterned film, which can require up to about 80 ft (24.5 m).

Is the top of a Fleetmaster wrapped?

No, the fabric top of a Fleetmaster convertible is not wrapped. The vinyl film ends where the top begins. A folding hard top is wrapped as separate panels if present.

Which Fleetmaster body takes more film?

The Fleetmaster wagon takes more film than the convertible—about 62 ft (19 m) versus 52 ft (16 m) for a standard wrap. The wagon's larger body panels and tailgate account for the extra material.

Can I wrap only the hood or the roof of a Fleetmaster?

Yes, you can wrap only the hood or the roof of a Fleetmaster as a partial wrap. Other options include mirror caps, chrome delete on window trim and badges, and paint protection film on the front end.