Wraps by car

Chevrolet Lanos wrap

This page covers the Chevrolet Lanos wrap for the single generation sold from 2005 to 2009. A full vinyl wrap of the newest sedan body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. The car is a subcompact with modest exterior surfaces, so film rolls are easy to plan.

1generations14.5 mof film for a full wrap

Chevrolet Lanos, first generation, factory photo
Chevrolet Lanos, first generation. Factory color shown.

Chevrolet Lanos wrap colors and ideas

  • Lanos black wrap
  • Lanos white wrap
  • Lanos gray wrap
  • Lanos silver wrap
  • Lanos red wrap
  • Lanos blue wrap
  • Lanos green wrap
  • Lanos yellow wrap
  • Lanos orange wrap
  • Lanos purple wrap
  • Lanos pink wrap
  • Lanos teal wrap
  • Lanos brown wrap
  • Lanos gold wrap
  • Lanos chrome wrap
  • Lanos color shift wrap
  • Lanos carbon fiber wrap
  • Lanos camo and patterned wrap

How much vinyl to wrap a Chevrolet Lanos

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2005–2009sedan (4 doors)166.8 in (4,237 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Lanos wrap cost factors

Lanos wrap cost depends mainly on the amount of film and the number of cut-outs the installer must handle. This sedan needs about 48 ft (14.5 m) of cast film for a standard color change, and more if you choose chrome or patterned material. Bumpers with fog lamps, mirrors, and badges add labor, as does any paint correction before the wrap.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: sedan (4 doors).
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Lanos wraps by generation

Swipe sideways. Tap a card for the full description.

Chevrolet Lanos, first generation, factory photo
Factory color shown

2005–2009 Lanos sedan (first generation)

2005–2009sedan (4 doors)166.8 in (4,237 mm)

The first-generation Chevrolet Lanos from 2005 to 2009 can have original or repainted panels due to the car's age. A test spot on the paint is necessary before a full wrap, because film adhesion varies between factory and resprayed surfaces. The installer should check each panel for clear coat wear and rust before cutting film.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Lanos

A partial wrap on a Lanos can cover the roof, hood, or mirror caps as separate jobs. Lanos chrome delete is done by covering the window trim and badges with black film. Paint protection film (PPF) is also available as clear film on the front end for stone chip coverage.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Chevrolet Lanos: body, cut-outs and film

A Chevrolet Lanos vinyl wrap is simplified by the one body style in the catalog: a four-door sedan. The car is 166.8 in (4,237 mm) long, which keeps panel sizes manageable for a single installer. There are no separate coupe or hatchback shapes to change the cutting layout between trims.

Lanos wrap ideas often start with the front bumper, where some trims have fog lamps that need cut-outs in the film. The door handles, mirrors, and badges also require careful trimming or removal before film is applied. Working around the sedan's window trim and fuel filler door adds routine detail time.

Knowing how much vinyl to wrap a Lanos starts with the one-generation range from 2005 to 2009. The T100 sedan shape stayed consistent through those years, so the same film estimate applies across the catalog. Only paint condition and existing repairs change the prep work, not the amount of film.

Questions about wrapping a Chevrolet Lanos

How much vinyl does it take to wrap a Chevrolet Lanos?

A full wrap of a Chevrolet Lanos takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. This figure assumes the sedan body from the newest generation and includes enough film for panel overlaps and typical waste. If you choose chrome or patterned film, plan for about 59 ft (18 m) because the pattern must be matched.

Can I wrap only the hood or the roof of a Lanos?

Yes, you can wrap only the hood or the roof of a Lanos as a partial job. The shop can also do mirror caps, a chrome delete on the window trim and badges, or clear paint protection film on the front end. These smaller jobs use less film and are a way to change one area without recovering the whole car.

Is a Lanos hard to wrap?

A Lanos is not especially hard to wrap, but the front bumper adds work on some trims with fog lamps that require cut-outs. The car's small size and simple sedan shape keep most panels flat and easy to reach. The greatest challenge is the paint condition on a car of these years, which may need more prep before film.

How many generations of the Lanos does this page cover?

This page covers one generation of the Chevrolet Lanos, produced from 2005 to 2009. The catalog includes only that first-generation sedan body with the T100 code. All wrap estimates and notes on these pages apply to that generation.