Wraps by car

Chevrolet Niva wrap

The Chevrolet Niva wrap page covers the first-generation SUV built from 2002 to 2020. This one generation keeps film planning simpler than on cars with several body shapes. A full wrap of the newest body takes about 56 ft (17 m) of 60-inch (1.52 m) cast film.

1generations17 mof film for a full wrap

Chevrolet Niva, first generation, factory photo
Chevrolet Niva, first generation. Factory color shown.

Chevrolet Niva wrap colors and ideas

  • Niva black wrap
  • Niva white wrap
  • Niva gray wrap
  • Niva silver wrap
  • Niva red wrap
  • Niva blue wrap
  • Niva green wrap
  • Niva yellow wrap
  • Niva orange wrap
  • Niva purple wrap
  • Niva pink wrap
  • Niva teal wrap
  • Niva brown wrap
  • Niva gold wrap
  • Niva chrome wrap
  • Niva color shift wrap
  • Niva carbon fiber wrap
  • Niva camo and patterned wrap

How much vinyl to wrap a Chevrolet Niva

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2002–2020SUV (5 doors)159.4 in (4,048 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Niva wrap cost factors

Niva wrap cost depends on the film area of about 56 ft (17 m) for a full wrap. The single generation from 2002 to 2020 keeps the body size the same for every year. Cut-outs for parking sensors, cameras, and fog lamps on some trims add work without adding film.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2009: bumpers and lights differ between the versions, and so do the film cuts.

Niva wraps by generation

Swipe sideways. Tap a card for the full description.

Chevrolet Niva, first generation, factory photo
Factory color shown

2002–2020 Niva SUV (first generation)

2002–2020SUV (5 doors)159.4 in (4,048 mm)

The first-generation Chevrolet Niva was restyled in 2009 with new bumpers and lights. Film cut for a pre-2009 front end does not fit a post-2009 front end. The rest of the body keeps the same shape, so door and roof panels are unchanged.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Niva

A partial wrap on a Chevrolet Niva can cover the roof, the hood, or the mirror caps. A chrome delete turns the window trim, decorative moldings, and badges black with film. Paint protection film (PPF) is clear film that can be applied to the front end only.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim, decorative moldings and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Chevrolet Niva: body, cut-outs and film

The Chevrolet Niva vinyl wrap follows the shape of a five-door SUV that is 159.4 in (4,048 mm) long. The straight sides and flat hood make the main panels easier to cover in one piece. The tailgate and roof need careful work because the body has one generation only.

Niva wrap ideas start with a tailgate where the film ends at the edge of the rear glass. Roof rails on some trims come off before the roof is wrapped, or the film is cut along them. Bright decorative moldings stay bright next to the film unless a chrome delete covers them with black film.

How much vinyl to wrap a Niva stays the same for every year from 2002 to 2020. The 2009 restyling changed bumpers and lights, so film cut for one version does not fit the other. A full wrap still uses about 56 ft (17 m) of 60-inch (1.52 m) cast film.

Questions about wrapping a Chevrolet Niva

How much vinyl does it take to wrap a Chevrolet Niva?

A full wrap of a Chevrolet Niva takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. The figure covers the newest body of the first generation, which ran from 2002 to 2020. Chrome or patterned film needs more because of pattern matching.

Which years of the Niva take the same film cuts?

All years of the Chevrolet Niva from 2002 to 2020 take the same film cuts for doors, roof, and tailgate. The 2009 restyling changed the bumpers and lights, so only those cuts differ. A pre-2009 front bumper film will not fit a 2009 or later bumper.

Can I wrap only the hood or the roof of a Niva?

Yes, a Chevrolet Niva can be wrapped with only the hood or the roof. A partial wrap can also cover the mirror caps. These smaller jobs are a way to change one part of the Niva without wrapping the whole body.

Is a Niva hard to wrap?

A Chevrolet Niva wrap has a few parts that add work. The tailgate film must end at the edge of the rear glass. Roof rails on some trims need to come off or be cut around, and parking sensors or cameras need cut-outs.