Wraps by car

Chevrolet Omega wrap

This page covers the Chevrolet Omega, two generations of this full-size car, and the vinyl wrap it takes. The newest body from 1998 to 2007 is a four-door sedan 192.1 in (4,880 mm) long. A full wrap of that sedan needs about 54 ft (16.5 m) of 60-inch (1.52 m) cast film.

2generations16.5 mof film for a full wrap

Chevrolet Omega, second generation, factory photo
Chevrolet Omega, second generation. Factory color shown.

Chevrolet Omega wrap colors and ideas

  • Omega black wrap
  • Omega white wrap
  • Omega gray wrap
  • Omega silver wrap
  • Omega red wrap
  • Omega blue wrap
  • Omega green wrap
  • Omega yellow wrap
  • Omega orange wrap
  • Omega purple wrap
  • Omega pink wrap
  • Omega teal wrap
  • Omega brown wrap
  • Omega gold wrap
  • Omega chrome wrap
  • Omega color shift wrap
  • Omega carbon fiber wrap
  • Omega camo and patterned wrap

How much vinyl to wrap a Chevrolet Omega

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1998–2007sedan (4 doors)192.1 in (4,880 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)
1992–1998sedan, wagon (4 or 5 doors)186.5 in (4,738 mm) to 187.7 in (4,768 mm)about 52 ft (16 m) for the sedan to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m)

Omega wrap cost factors

Omega wrap cost depends on the film amount, the body style, and the labor on this car. The second-generation sedan needs about 54 ft (16.5 m) of film, while a first-generation wagon needs about 57 ft (17.5 m) or more for a pattern. The size, the number of panels, and the finish of the film set the final cost.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: sedan (4 doors).

Omega wraps by generation

Swipe sideways. Tap a card for the full description.

Chevrolet Omega, second generation, factory photo
Factory color shown

1998–2007 Omega sedan (second generation)

1998–2007sedan (4 doors)192.1 in (4,880 mm)

The second-generation Chevrolet Omega from 1998 to 2007 has one body style: a four-door sedan 192.1 in (4,880 mm) long. On a car of these years panels may be original or repainted, so a test spot comes before a full wrap. The paint condition changes how the film adheres and how the installer works each panel.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Chevrolet Omega, first generation, factory photo
Factory color shown

1992–1998 Omega sedan, wagon (first generation)

1992–1998sedan, wagon (4 or 5 doors)186.5 in (4,738 mm) to 187.7 in (4,768 mm)

The first-generation Chevrolet Omega from 1992 to 1998 came as a sedan or a wagon. The body style decides the panel plan and the film amount: the sedan is 186.5 in (4,738 mm) long, and the wagon is 187.7 in (4,768 mm). The wagon adds the tailgate and rear side windows, so it needs more film than the sedan.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 52 ft (16 m) for the sedan to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m).

Roof, hood, chrome delete and PPF on an Omega

A partial wrap on a Chevrolet Omega covers the roof, hood, or mirror caps only. An Omega chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Chevrolet Omega: body, cut-outs and film

A Chevrolet Omega vinyl wrap follows the body style and size of each generation. The second generation is a sedan only, at 192.1 in (4,880 mm), which gives long roof and side panels. The first generation offered a sedan or a wagon, from 186.5 in (4,738 mm) to 187.7 in (4,768 mm), so the wagon adds the tailgate and rear pillars to the panel plan.

Omega wrap ideas start with the parts that need cut-outs or come off the car. Door handles, mirrors, badges, lights, and trim all need removal or careful cutting around them. On the first-generation wagon, the tailgate has the rear glass in it, and the film ends at the edge of the glass.

How much vinyl to wrap an Omega changes between the two generations. The sedan of the second generation takes about 54 ft (16.5 m) of 60-inch film in a color change. The first generation takes about 52 ft (16 m) for the sedan and about 57 ft (17.5 m) for the wagon. A chrome or patterned film adds more because the pattern must line up, from 69 ft (21 m) up to about 72 ft (22 m).

Questions about wrapping a Chevrolet Omega

How much vinyl does it take to wrap a Chevrolet Omega?

About 54 ft (16.5 m) of 60-inch (1.52 m) cast film wraps a second-generation Chevrolet Omega sedan. This is the newest body from 1998 to 2007, and it is the figure for a full color change wrap. A first-generation sedan takes about 52 ft (16 m), and a wagon takes about 57 ft (17.5 m).

Can I wrap only the hood or the roof of an Omega?

Yes, you can wrap only the hood or the roof of an Omega. A partial wrap covers the roof, hood, or mirror caps, and it uses less film than a full wrap. This is a smaller job that still changes the look of the car.

Is an Omega hard to wrap?

An Omega is not the easiest car to wrap because of its size and a few details. The full-size body has long flat panels and a lot of trim to remove or cut around. On the first-generation wagon, the tailgate has the rear glass in it, and the film ends at the edge of the glass.

How many generations of the Omega does this page cover?

This page covers two generations of the Chevrolet Omega. The first generation ran from 1992 to 1998 as a sedan or wagon. The second generation ran from 1998 to 2007 as a sedan only.