Wraps by car

Chevrolet Optra wrap

The Chevrolet Optra wrap page covers the first generation of this subcompact car. The Optra was produced from 2004 to 2013 in hatchback and sedan bodies. A full vinyl wrap of the newest body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film.

1generations15.5 mof film for a full wrap

Chevrolet Optra, first generation, factory photo
Chevrolet Optra, first generation. Factory color shown.

Chevrolet Optra wrap colors and ideas

  • Optra black wrap
  • Optra white wrap
  • Optra gray wrap
  • Optra silver wrap
  • Optra red wrap
  • Optra blue wrap
  • Optra green wrap
  • Optra yellow wrap
  • Optra orange wrap
  • Optra purple wrap
  • Optra pink wrap
  • Optra teal wrap
  • Optra brown wrap
  • Optra gold wrap
  • Optra chrome wrap
  • Optra color shift wrap
  • Optra carbon fiber wrap
  • Optra camo and patterned wrap

How much vinyl to wrap a Chevrolet Optra

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2004–2013hatchback, sedan (4 or 5 doors)177.2 in (4,500 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Optra wrap cost factors

The Optra wrap cost depends on the number of panels and the film selection. The hatchback and the sedan share the same 177.2 in (4,500 mm) length, so the panel count is close. A full wrap needs about 51 ft (15.5 m) of 60-inch (1.52 m) film, while chrome or patterned film adds about 13 ft (4 m) more.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: hatchback, sedan (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a sunroof: the roof film is cut around its opening.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Optra wraps by generation

Swipe sideways. Tap a card for the full description.

Chevrolet Optra, first generation, factory photo
Factory color shown

2004–2013 Optra hatchback, sedan (first generation)

2004–2013hatchback, sedan (4 or 5 doors)177.2 in (4,500 mm)

The first generation of the Chevrolet Optra was sold from 2004 to 2013 in two body styles. The hatchback and the sedan differ in the rear panel design and the film amount. A full wrap of either body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a sunroof: the roof film is cut around its opening.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on an Optra

A partial wrap on an Optra can focus on the roof, hood, or mirror caps. For a chrome delete, the window trim and badges are covered with black film. Paint protection film (PPF) in clear film is another option for the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Chevrolet Optra: body, cut-outs and film

A Chevrolet Optra vinyl wrap starts with the body style and its 177.2 in (4,500 mm) length. The hatchback and the sedan share the same wheelbase and overall length. A smaller car like this still has many panels, and each panel is wrapped separately.

Optra wrap ideas must account for the tailgate that holds the rear glass. The film ends at the edge of that glass, so the tailgate wrap is smaller than it looks. Every trim has a sunroof, and the roof film is cut around its opening. Some trims have fog lamps in the front bumper that need cut-outs in the bumper film.

How much vinyl to wrap an Optra depends on the generation and the body style. This model was offered in one generation from 2004 to 2013. A full wrap needs about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 64 ft (19.5 m).

Questions about wrapping a Chevrolet Optra

How much vinyl does it take to wrap a Chevrolet Optra?

It takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film to wrap a Chevrolet Optra. This figure is for a full wrap of the newest body. If you choose chrome or patterned film, plan for about 64 ft (19.5 m).

Can the roof of an Optra be wrapped?

Yes, the roof of a Chevrolet Optra can be wrapped. Every trim has a sunroof, so the film is cut around its opening. A roof wrap is a partial job that changes just one large panel.

Which Optra body takes more film?

The sedan body of the Optra takes more film than the hatchback. The sedan has a separate trunk lid and longer rear quarter panels. The hatchback tailgate ends at the rear glass, which reduces the wrapped area.

Can I wrap only the hood or the roof of an Optra?

Yes, you can wrap only the hood or the roof of an Optra. A partial wrap of the roof, hood, or mirror caps is a smaller job than a full wrap. You can also choose a chrome delete for the window trim and badges.