Wraps by car

Chevrolet Prizm wrap

This page covers a vinyl wrap for the Chevrolet Prizm, a subcompact sedan produced from 1997 to 2002. The catalog includes one generation of the Prizm. A full wrap of the newest body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 61 ft (18.5 m).

1generations15 mof film for a full wrap

Chevrolet Prizm, first generation, factory photo
Chevrolet Prizm, first generation. Factory color shown.

Chevrolet Prizm wrap colors and ideas

  • Prizm black wrap
  • Prizm white wrap
  • Prizm gray wrap
  • Prizm silver wrap
  • Prizm red wrap
  • Prizm blue wrap
  • Prizm green wrap
  • Prizm yellow wrap
  • Prizm orange wrap
  • Prizm purple wrap
  • Prizm pink wrap
  • Prizm teal wrap
  • Prizm brown wrap
  • Prizm gold wrap
  • Prizm chrome wrap
  • Prizm color shift wrap
  • Prizm carbon fiber wrap
  • Prizm camo and patterned wrap

How much vinyl to wrap a Chevrolet Prizm

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1997–2002sedan (4 doors)175.0 in (4,445 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Prizm wrap cost factors

The Prizm wrap cost depends on the amount of film and the condition of the paint. A car from 1997 to 2002 may have original or resprayed panels, so the installer may need a test spot. The size of the sedan requires about 49 ft (15 m) of standard cast film or about 61 ft (18.5 m) for chrome or patterned film. Additional work on bumpers and trim also affects the cost.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: sedan (4 doors).

Prizm wraps by generation

Swipe sideways. Tap a card for the full description.

Chevrolet Prizm, first generation, factory photo
Factory color shown

1997–2002 Prizm sedan (first generation)

1997–2002sedan (4 doors)175.0 in (4,445 mm)

The first generation Chevrolet Prizm was built from 1997 to 2002. Because of its paint age, panels may be original or repainted. A test spot comes before a full wrap to check adhesion on older paint. This step is important for a wrap on a car of these years.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Prizm

A partial wrap on the Prizm can cover the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end. These options allow you to change specific areas of the Prizm without a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Chevrolet Prizm: body, cut-outs and film

The Chevrolet Prizm vinyl wrap covers one body style: a four-door sedan. The car is 175.0 in (4,445 mm) long, which is compact enough for a straightforward wrap. The single body style means the installer has less surface variation to manage. A full wrap is therefore a predictable job for this vehicle.

Prizm wrap ideas often involve handling specific parts that need cut-outs or removal. Door handles, mirrors, and badges require careful trimming or removal before wrapping. The front bumper and grille area need careful cutting to work around openings. These details ensure the vinyl conforms properly to the Prizm's contours.

When you count how much vinyl to wrap a Prizm, the single generation matters. All years from 1997 to 2002 share the same four-door sedan body. There are no changes in length or body panels between those years. That means one film estimate fits every Prizm in this catalog.

Questions about wrapping a Chevrolet Prizm

How much vinyl does it take to wrap a Chevrolet Prizm?

It takes about 49 ft (15 m) of 60-inch (1.52 m) cast film to wrap a Chevrolet Prizm. If you use chrome or patterned film, the amount is about 61 ft (18.5 m). These figures are for the newest body in the catalog, the four-door sedan.

Can I wrap only the hood or the roof of a Prizm?

Yes, you can wrap only the hood or the roof of a Prizm. A partial wrap may cover the roof, hood, or mirror caps. This is a smaller job than a full wrap and uses less film.

Is a Prizm hard to wrap?

The Prizm is not extremely hard to wrap, but some parts add work. Door handles, mirrors, and badges need cut-outs or removal. The front bumper and grille area require careful cutting around openings.

How many generations of the Prizm does this page cover?

This page covers one generation of the Chevrolet Prizm. The generation spans the production years 1997 to 2002.