Wraps by car

Chevrolet SS wrap

The Chevrolet SS wrap is a full color change on the 2013–2017 full-size VF sedan. The catalog covers one generation of the car, a four-door body built in Australia. A complete vinyl wrap of the newest body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film.

1generations18.5 mof film for a full wrap

Chevrolet SS, first generation, factory photo
Chevrolet SS, first generation. Factory color shown.

Chevrolet SS wrap colors and ideas

  • Chevrolet SS black wrap
  • Chevrolet SS white wrap
  • Chevrolet SS gray wrap
  • Chevrolet SS silver wrap
  • Chevrolet SS red wrap
  • Chevrolet SS blue wrap
  • Chevrolet SS green wrap
  • Chevrolet SS yellow wrap
  • Chevrolet SS orange wrap
  • Chevrolet SS purple wrap
  • Chevrolet SS pink wrap
  • Chevrolet SS teal wrap
  • Chevrolet SS brown wrap
  • Chevrolet SS gold wrap
  • Chevrolet SS chrome wrap
  • Chevrolet SS color shift wrap
  • Chevrolet SS carbon fiber wrap
  • Chevrolet SS camo and patterned wrap

How much vinyl to wrap a Chevrolet SS

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2013–2017sedan (4 doors)195.5 in (4,966 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

Chevrolet SS wrap cost factors

A Chevrolet SS wrap cost depends on the film, the condition of the paint and the amount of disassembly the job needs. The full-size body is 195.5 in (4,966 mm) long, so a full color change uses about 61 ft (18.5 m) of film. A chrome or patterned film raises the material amount to about 70 ft (21.5 m). Removing or masking the badges and chrome side window trim adds labor.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: sedan (4 doors).
  • Restyled in 2015: bumpers and lights differ between the versions, and so do the film cuts.

Chevrolet SS wraps by generation

Swipe sideways. Tap a card for the full description.

Chevrolet SS, first generation, factory photo
Factory color shown

2013–2017 Chevrolet SS sedan (first generation)

2013–2017sedan (4 doors)195.5 in (4,966 mm)

The first-generation Chevrolet SS ran from 2013 to 2017 and was restyled in 2015. The update changed the front and rear bumpers and the lights, so film cut for one version does not fit the other. An installer who wraps both versions needs separate templates or cut files. The body style stayed the same four-door sedan, and the car kept the same length of 195.5 in (4,966 mm).

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a Chevrolet SS

A Chevrolet SS chrome delete covers the bright window trim and the badges with black film. A partial wrap can be done on the roof, the hood or the mirror caps only. Paint protection film (PPF) is clear film applied to the front end to protect the paint. The installer cuts around the door handles and side repeaters for any partial job.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Chevrolet SS: body, cut-outs and film

A Chevrolet SS vinyl wrap covers a long full-size sedan body of 195.5 in (4,966 mm). The four-door style means large door panels and a roof that are straightforward to wrap. The front and rear bumpers are deep and curved, so the installer needs cast film and careful stretching. The body is one of the longer sedans in the catalog, so any wrap uses most of the material estimate.

Chevrolet SS wrap ideas start with the parts that need cut-outs or come off. The door handles, antenna, badges and front and rear bumper trim are removed for a clean install. The mirrors fold in, and the side repeaters sit in the fenders, so the wrap film is cut around them. The car has chrome brightwork around the side windows that can be left or covered with black film for a chrome delete.

How much vinyl to wrap a Chevrolet SS depends on the film and the year. The car was restyled in 2015, and the bumpers and lights changed shape, so precut film for a 2013–2014 car does not fit a 2015–2017 car. A full wrap of a 2015–2017 Chevrolet SS takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. If the car is wrapped in chrome or a patterned film, the installer orders about 70 ft (21.5 m).

Questions about wrapping a Chevrolet SS

How much vinyl does it take to wrap a Chevrolet SS?

It takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film to wrap a Chevrolet SS. That figure is for a full color change on the newest body, the 2015–2017 sedan. For chrome or patterned film, order about 70 ft (21.5 m).

Which years of the Chevrolet SS take the same film cuts?

The 2015–2017 Chevrolet SS models take the same film cuts. The car was restyled for 2015, and the bumpers and lights changed shape. A 2013 or 2014 car uses different cuts from the later cars.

Can I wrap only the hood or the roof of a Chevrolet SS?

Yes, you can wrap only the hood or the roof of a Chevrolet SS. A partial wrap covers one panel or a set of small parts like the mirror caps. The installer still needs the correct film length for the panel and makes cut-outs as needed.

Is a Chevrolet SS hard to wrap?

A Chevrolet SS is not hard to wrap, but the size and a few details add work. The body is 195.5 in (4,966 mm) long, so the installer handles large panels. The bumpers are deep and curved, and the door handles, badges and antenna need removal or cut-outs.